Observation of size-dependent thermalization in CdSe nanocrystals using time-resolved photoluminescence spectroscopy

We report heat dissipation times in semiconductor nanocrystals of CdSe. Specifically, a previously unresolved, subnanosecond decay component in the low-temperature photoluminescence decay dynamics exhibits longer decay lifetimes (tens to hundreds of picoseconds) for larger nanocrystals as well as a size-independent, ~25-meV spectral shift. We attribute the fast relaxation to transient phonon-mediated relaxation arising from nonequilibrium acoustic phonons. Following acoustic phonon dissipation, the dark exciton state recombines more slowly via LO-phonon assistance resulting in the observed spectral shift. The measured relaxation time scales agree with classical calculations of thermal diffusion, indicating that interfacial thermal conductivity does not limit thermal transport in these semiconductor nanocrystal dispersions.     

Differentiation between intra-axial metastatic tumor progression and radiation injury following fractionated radiation therapy or stereotactic radiosurgery using MR spectroscopy, perfusion MR imaging or volume progression modeling

Objective

To determine the accuracy of magnetic resonance spectroscopy (MRS), perfusion MR imaging (MRP), or volume modeling in distinguishing tumor progression from radiation injury following radiotherapy for brain metastasis.

Methods

Twenty-six patients with 33 intra-axial metastatic lesions who underwent MRS (n=41) with or without MRP (n=32) after cranial irradiation were retrospectively studied. The final diagnosis was based on histopathology (n=4) or magnetic resonance imaging (MRI) follow-up with clinical correlation (n=29). Cho/Cr (choline/creatinine), Cho/NAA (choline/N-acetylaspartate), Cho/nCho (choline/contralateral normal brain choline) ratios were retrospectively calculated for the multi-voxel MRS. Relative cerebral blood volume (rCBV), relative peak height (rPH) and percentage of signal-intensity recovery (PSR) were also retrospectively derived for the MRPs. Tumor volumes were determined using manual segmentation method and analyzed using different volume progression modeling. Different ratios or models were tested and plotted on the receiver operating characteristic curve (ROC), with their performances quantified as area under the ROC curve (AUC). MRI follow-up time was calculated from the date of initial radiotherapy until the last MRI or the last MRI before surgical diagnosis.

Results

Median MRI follow-up was 16 months (range: 2-33). Thirty percent of lesions (n=10) were determined to be radiation injury; 70% (n=23) were determined to be tumor progression. For the MRS, Cho/nCho had the best performance (AUC of 0.612), and Cho/nCho >1.2 had 33% sensitivity and 100% specificity in predicting tumor progression. For the MRP, rCBV had the best performance (AUC of 0.802), and rCBV >2 had 56% sensitivity and 100% specificity. The best volume model was percent increase (AUC of 0.891); 65% tumor volume increase had 100% sensitivity and 80% specificity.

Conclusion

Cho/nCho of MRS, rCBV of MRP, and percent increase of MRI volume modeling provide the best discrimination of intra-axial metastatic tumor progression from radiation injury for their respective modalities. Cho/nCho and rCBV appear to have high specificities but low sensitivities. In contrast, percent volume increase of 65% can be a highly sensitive and moderately specific predictor for tumor progression after radiotherapy. Future incorporation of 65% volume increase as a pretest selection criterion may compensate for the low sensitivities of MRS and MRP.     

Relative intensity noise induced by four-wave mixing in the case of two-wave transmission in an optical fiber

Four-wave mixing (FWM) is a significant nonlinear effect in wavelength division multiplexing (WDM) fiber-optic systems. For two-wave transmission, it is easily found that the FWM noise power decreases with frequency spacing and increases with signal power. However, the variation of relative intensity noise (RIN) with frequency spacing and signal power is only 2 dB at most. The intensity fluctuations induced by the energy exchange between the FWM generated new waves and the original ones are trivial and the influence of FWM on RIN can be neglected. It is also found that the increase of RIN with signal power is mainly attributed to stimulated Brillouin scattering (SBS) rather than FWM.     

Multi-wavelength operation of LD side-pumped Nd:YAG laser

A dual-wavelength laser at 1064 nm and 1319 nm is obtained by a single Nd:YAG crystal rod. On the basis of 1064 nm and 1319 nm dual-wavelength laser installation, the second harmonic waves at 532 nm and 660 nm can be achieved by using non-linear frequency conversion technology. When 1064 nm and 1319 nm lasers oscillate simultaneously, the maximum output power is 30.5 W and 8.78 W, respectively. When the 1319 nm laser is restrained, we obtain a 35.6 W maximum output power at 1064 nm and by contrary 11.2 W at 1319 nm. The maximum output powers of 532 nm and 660 nm lasers are 5.34 W and 1.353 W when oscillating simultaneously. With one of them restrained, the maximum output power is 6.72 W at 532 nm and 1.90 W at 660 nm. The optimum repetition rate of the acousto-optic Q-switch is 10.5 KHz and 20.5 KHz for 532 nm and 660 nm lasers, respectively. The optical-to-optical conversion efficiency from the fundamental waves to the harmonic waves is 17.5% and 15.4%. The instability is less than 2%.     

Oxygen relaxation and phase transition in GdBaCo2O5 + δ oxide

Electrical conductivity, internal friction techniques and dilatometer have been used to investigate the oxygen relaxation, phase transition and thermal expansion behavior of GdBaCo₂O_5 + δ. The main electronic charge carriers in GdBaCo₂O_5 + δ are electronic holes, which could be assigned to the formation of Co⁴⁺. The oxygen exchange kinetics intensely depends on oxygen partial pressure and is also closely related to temperature. Both electrical conductivity and internal friction give rise to an abnormal at about 75 °C, which are related to the insulator-metal transition occurring in GdBaCo₂O_5 + δ. One large relaxation internal friction peak, due to the motion of oxygen within Gd-O plane, is also found in the oxide. The average thermal expansion coefficient (TEC) of GdBaCo₂O_5 + δ is about 21.4 × 10⁻⁶ K⁻¹ between 500 °C and 900 °C.     

Designing N-halamine based antibacterial surface on polymers: Fabrication, characterization, and biocidal functions

We demonstrate a valuable method to generate reactive groups on inert polymer surfaces and bond antibacterial agents for biocidal ability. Polystyrene (PS) surfaces were functionalized by spin coating of sub-monolayer and monolayer films of poly(styrene-b-tert-butyl acrylate) (PS-PtBA) block copolymer from solutions in toluene. PS-PtBA self-assembled to a bilayer structure on PS that contains a surface layer of the PtBA blocks ordering at the air-polymer interface and a bottom layer of the PS blocks entangling with the PS substrate. The thickness of PtBA layer could be linearly controlled by the concentration of the spin coating solution and a 2.5 nm saturated monolayer coverage of PtBA was achieved at 0.35% (w/w). Carboxyl groups were generated by exposing the tert-butyl ester groups of PtBA on saturated surface to trifluoroacetic acid (TFA) to bond tert-butylamine via amide bonds that were further chlorinated to N-halamine with NaOCl solution. The density of N-halamine on the chlorinated surface was calculated to be 1.05 × 10⁻⁵ mol/m² by iodimetric/thiosulfate titration. Presented data showed the N-halamine surface provided powerful antibacterial activities against Staphylococcus aureus and Escherichia coli. Over 50% of the chlorine lost after UVA irradiation could be regained upon rechlorination. This design concept can be virtually applied to any inert polymer by choosing appropriate block copolymers and antibacterial agents to attain desirable biocidal activity.     

Maskless laser tailoring of conical pillar arrays for antireflective biomimetic surfaces

Herein, we report a facile approach for rapid and maskless production of subwavelength structured antireflective surfaces with high and broadband transmittance-direct laser interference ablation. The interfered laser beams were introduced into the surface of a bare optical substrate, where structured surfaces consisting of a micropillar array were produced by two-step laser irradiation in the time frame of seconds. A multiple exposure of the two-beam interference approach was proposed instead of multiple-beam interference to simply realize planar patterns of a high aspect ratio. Tall sinusoidal pillars were created and shaped by pulse shot number control. As an example of the application, zinc sulfide substrates were processed with the technology, from which high transmission at an infrared wavelength, over 92%, at normal incidence was experimentally achieved.     

Volume polarization holographic recording in thick phenanthrenequinone-doped poly(methyl methacrylate) photopolymer

Volume polarization holographic recording in phenanthrenequinone-doped poly (methyl methacrylate) photopolymer is obtained. Photoinduced birefringence in a 2 mm thick sample is measured by a phase-modulated ellipsometry. The birefringence induced in this material by linearly polarized beam at 514 nm reaches 1.2×10(-5). In addition, ability for recording volume polarization grating using two different polarization configurations is demonstrated and compared. The experimental results show that the diffraction efficiency of the hologram reaches to ～40% by using two orthogonal circularly polarized beams.     

水平层状介质中电磁场并矢Green函数的一种快速新算法

本文利用提取直射波并结合自适应数字滤波等技术提出一种计算水平层状介质中电磁场并矢Green函数的快速算法. 首先将谱域Green函数中表征均匀介质作用的直射波提取出来并对其积分进行解析计算,这种处理降低了谱域Green函数的奇异性,可在很大程度上缩短其积分收敛区间. 然后在将谱域Green函数剩余部分对应积分转化为三个快速下降积分的基础上,引入一种自适应数字滤波算法对其进行快速求解. 最后通过具体算例验证了本文所述算法的有效性. 关键词： 并矢Green函数 快速算法 水平层状介质     

基于HJ-1-CCD数据的地表反射率反演与验证

环境一号卫星OCD相机(HJ-1-CCD)30m的空间分辨率在地物识别中具有潜在优势,然而由于缺少短波红外通道,利用暗像元法反演地表反射率较为困难.基于北京与珠三角地区的地物光谱试验,获得暗像元的植被指数与红、蓝波段反射率比值,构建基于辐射传输模型的大气校正算法.为了验证算法精度,将北京地区卫星反演值与实测的草坪、水体...