A novel 3D mammalian cell perfusion-culture system in microfluidic channels

Mammalian cells cultured on 2D surfaces in microfluidic channels are increasingly used in drug development and biological research applications. These systems would have more biological or clinical relevance if the cells exhibit 3D phenotypes similar to the cells in vivo. We have developed a microfluidic channel based system that allows cells to be perfusion-cultured in 3D by supporting them with adequate 3D cell-cell and cell-matrix interactions. The maximal cell-cell interaction was achieved by perfusion-seeding cells through an array of micropillars; and 3D cell-matrix interactions were achieved by a polyelectrolyte complex coacervation process to form a thin layer of matrix conforming to the 3D cell shapes. Carcinoma cell lines (HepG2, MCF7), primary differentiated (hepatocytes) and primary progenitor cells (bone marrow mesenchymal stem cells) were perfusion-cultured for 72 hours to 1 week in the microfluidic channel, which preserved their 3D cyto-architecture and cell-specific functions or differentiation competence. This transparent 3D microfluidic channel-based cell culture system also allows direct optical monitoring of cellular events for a wide range of applications.     

Cr/MCM-41催化剂上的乙烯聚合行为

以纯硅ＭＣＭ４１为载体，负载Ｐｈｉｌｉｐｓ烯烃聚合催化剂活性组分Ｃｒ．ＸＲＤ及ＴＥＭ表征结果表明，所得到的Ｃｒ／ＭＣＭ４１催化剂具有良好的晶体结构和较理想的长程有序一维孔道．ＦＴＩＲ和Ｒａｍａｎ光谱表征结果表明，Ｃｒ／ＭＣＭ４１上不仅可发生乙烯聚合过程，而且形成的聚乙烯以结晶和无定形两种形态存在．乙烯聚合活性不仅与反应参数有关，而且与Ｃｒ的负载量密切相关．用于乙烯聚合后，Ｃｒ／ＭＣＭ４１催化剂仍保持其特征的晶体结构和一维孔道结构．     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

新工科项目“地方(行业)高校化学类专业应对产业变化的升级改造研究与实践”的实施

This "emerging engineering education (3E)" project "Upgrade and Practice of Chemistry-related Majors of Local and/or Specialized University Responding to the Industry Changes" was supported by the Ministry of Education. To aim at the issue of how to upgrade the chemistry-related majors of a local and/or specialized university responding to industry changes, an investigation on local regional economy and industry changes was carried out, the capability requirements of 3E for talents were analyzed, and the training objectives, graduation requirements as well as the new teaching models were also studied for the major to meet the future requirements. The practical experience for 3E construction of chemistry-related majors by selected universities was suggested.     

含长丙烯序列无规乙丙共聚物的合成与表征

用δ-TiCl₃-Et₂AlCl催化剂,以庚烷作溶剂,在单体C₃含量>60mol%的情况下,乙丙常压共聚可得到含长丙烯序列无规乙丙共聚物(LP-EPR)。其特性粘数〔η〕在2—3dl/g之间。影响〔η〕的主要因素是〔Al〕/〔Ti〕比、聚合温度和时间。共聚物的组成主要依赖单体C₃含量。通过庚烷萃取、红外、扭摆、x-射线衍射及相差显微镜等方法证明,在共聚物的无规乙丙分子链中含有全同聚丙烯(PP)序列,序列含量直接影响共聚物的结晶度、强度和硬度。     

海绵Spongia sp.化学成分的研究（I）

应用气相色谱－质谱联用技术从海绵Ｓｐｏｎｇｉａ ｓｐ．中分离鉴定出４个化学成分：１．－氯－２,２－二对氯苯基乙烯（ＤＤＭＵ,Ｉ）、１,１－二氯－２,２－二对氯苯基乙烯（ＤＤＥ,Ⅱ）、１,１－二氯－２,２－二对氯苯乙烷（ＤＤＤ,Ⅲ）和角鲨烯（Ⅳ）。前３个化合物是首次从Ｓｐｏｎｇｉａ属海绵中分离得到。     

GC-MS法测定大气样品的前处理研究--碳化纤维树脂捕集大气中痕量多环芳烃

研究了碳化纤维树脂吸附载体采集大气中多环芳烃(PAHs)的性能、样品前处理条件和毛细管气相色谱－质谱联用仪检测PAHs的,地具有代表性的多个采样点进行了实地采样、分析,证明碳化纤维树脂吸附载体是一种性能独特的固相吸附剂,建立的样品前处理方法可行,分析数据可靠,可用于大气中PAHs的检测。     

锌—镉法测定天然水中硝酸盐的盐误差及其解决方法

研究了锌-镉法测定天然水中硝酸盐的盐误差,发现水中含盐量对还原率有重大影响,但在盐度为1%以后还原率基本不变;加入人工海盐(1.5g/50ml水样)可消除盐误差.由此建立了没有盐误差的新的锌-镉法.方法相对标准偏差小于3%,回收率为98%～102%,与镉-铜法对比,两种方法的相对偏差小于8%.     

TX-100反相微乳液的缔合结构研究

对ＴＸ－１００、正戊醇、正己醇、正庚醇、正辛醇及辛烷形成的反相微乳液用ＥＳＲ自旋标记方法进行了研究,结果认为反相微乳液的形成过程伴随着表面活性剂链排列的变化,在加入水量较少时栅状区域的表面活性剂链排列拥挤,进一步的水化作用使其排列疏松。而疏水性强的探针则表明水化作用渗透到了反相微乳液的疏水区域。     

H+CN体系中平行络合反应的动力学

利用分子反应动力学的经典轨迹法研究化学反应体系已经开展了很多工作,但是,研究长寿命络合物的几何异构体就显得有些困难,主要表现在该方法对几何异构体不容易判别．由于这些原因和计算机时大增,Davis[1]利用经典轨迹法和统计方法相结合,研究了H＋CN和H＋NC体系在固定方位时的长寿命络合物动力学行为,并且采用Murrel等[2]拟合光谱数据的势能函数,该势能函数在HCN和HNC平衡点的频率与实验值相差较大．本文利用经典轨迹法研究了H＋CN产生HCN和HNC平行络合物异构体的分子反应动力学行为,揭示了平行络合反应产生几何异构体的…