布拉格方程在高聚物结构研究中的应用

本文将布拉格方程推广应用到高聚物的结构研究中，得到了经不同剂量辐照的聚乙烯单晶的长周期，并辅以示差扫描量热法研究了γ－射线辐照对聚乙烯单晶结构的影响．     

二乙胺合三(5-甲基-2-苯并噻唑基)硼烷的晶体结构

标题化合物二乙胺合三（５－甲基－２－苯并噻唑基）硼烷（Ｃ２８Ｈ２９ＢＮ４Ｓ３（Ｍｒ＝５２７．５７）的晶体属于三斜晶系，空间群为Ｐ１，晶胞参数ａ＝０．３９７（８）ｎｍ，ｂ＝１．１７４２（６）ｎｍ，ｃ＝１．３１００（２）ｎｍ，α＝１０４．２９（２）°，β＝９２．９９（３）°，γ＝９８．５８（５）°，Ｖ＝１．３７９０ｎｍ３，Ｚ＝２，Ｄｃ＝１．２７０ｇ／ｃｍ３，μ（ＭｏＫα）＝２．８０４ｃｍ－１．结构的偏离因子Ｒ＝０．０６４８，Ｒｗ＝０．０７３７．结构测定表明，甲基取代基的电子效应导致硼碳键键长的平均化，预示杂环对硼原子的π－电子反馈与胺基氮原子对硼原子的反馈有彼消此长的关系．     

卡尔曼滤波紫外光度法同时测定酱油、食醋中的山梨酸和苯甲酸

在酸性条件下，采用乙酸乙酯萃取、Na2HPO4溶液反萃取分离酱汪、食醋中的山梨酸、苯甲酸，卡尔曼滤波法计算结果，并与比值导数波谱法进行比较。结果表明，卡尔曼滤波法较地数波谱法有较高准确度和精密度，并能监测干扰物质存在与否。用于实际样品分析有更高的可靠性。     

An Improved Extra-Gradient Method for Minimizing a Sum of p-norms—A Variational Inequality Approach

This paper presents a variational inequality (VI) approach to the problem of minimizing a sum of p-norms. First the original problem is reformulated as an equivalent linear VI. Then an improved extra-gradient method is presented to solve the linear VI. Applications to the problem of p-norm Steiner Minimum Trees (SMT) shows that the proposed method is effective. Comparison with the general extra-gradient method is also provided to show the improvements of the new method.     

Synthesis and properties of noncoplanar rigid‐rod aromatic polyhydrazides and poly(1,3,4‐oxadiazole)s containing phenyl or naphthyl substituents

Two new phenyl‐ and naphthyl‐substituted rigid‐rod aromatic dicarboxylic acid monomers, 2,2′‐diphenylbiphenyl‐4,4′‐dicarboxylic acid ( 4 ) and 2,2′‐di(1‐naphthyl)biphenyl‐4,4′‐dicarboxylic acid ( 5 ), were synthesized by the Suzuki coupling reaction of 2,2′‐diiodobiphenyl‐4,4′‐dicarboxylic acid dimethyl ester with benzeneboronic acid and naphthaleneboronic acid, respectively, followed by alkaline hydrolysis of the ester groups. Four new polyhydrazides were prepared from the dicarboxylic acids 4 and 5 with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. These polyhydrazides were amorphous and readily soluble in many organic solvents. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass transition temperatures in the range of 187–234 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(1,3,4‐oxadiazole)s exhibited T_g's in the range of 252–283 °C, 10% weight‐loss temperature in excess of 470 °C, and char yield at 800 °C in nitrogen higher than 54%. These organo‐soluble polyhydrazides and poly(1,3,4‐oxadiazole)s exhibited UV–Vis absorption maximum at 262–296 and 264–342 nm in NMP solution, and their photoluminescence spectra showed maximum bands around 414–445 and 404–453 nm, respectively, with quantum yield up to 38%. The electron‐transporting properties were examined by electrochemical methods. Cyclic voltammograms of the poly(1,3,4‐oxadiazole) films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited reversible reduction redox with E_onset at ?1.37 to ?1.57 V versus Ag/AgCl in dry N,N‐dimethylformamide solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6466–6483, 2006     

Rapid determination of vitellogenin in fish plasma by anion exchange high performance liquid chromatography using postcolumn fluorescence derivatization with o-phthalaldehyde.

An analytical method involving anion exchange high performance liquid chromatographic determination of vitellogenin (Vtg) in fish plasma after postcolumn fluorescence derivatization with o-phthalaldehyde (OPA) was developed. The retention time of Vtg was about 11 min. The reagent variables for derivatization were optimized. The fluorophore was excited at 335 nm and detected at 435 nm. A calibration curve was established ranging from 0.13 to 11.28 microg. The determination limit of Vtg was found to be as low as 0.13 microg. The spiked recovery was 93.6% and interassay variability was less than 4%. The method developed was used to determine Vtg in fish plasma obtained from red sea bream (Pagrosomus major), black porgy (Sparus macrocephalus) and skew band grunt (Hapalogenys nitens), without complicated sample pretreatment. The results confirmed that the method showed advantages of being simple, rapid, reproducible and sensitive.     

Stability of transonic shocks in supersonic flow past a wedge

In this paper we study the stability of transonic shocks in steady supersonic flow past a wedge. We take the potential flow equation as the mathematical model to describe the compressible flow. It is known that in generic case such a problem admits two possible location of shock, connecting the flow ahead it and behind it. They can be distinguished as supersonic-supersonic shock and supersonic-subsonic shock (or transonic shock). Both these possible shocks satisfy the Rankine-Hugoniot conditions and entropy condition. In this paper we prove that the transonic shock is also stable under perturbation of the coming flow provided the pressure at infinity is well controlled.     

湍流燃烧二阶矩模型的大涡模拟验证

对美国Sandia国家实验室测量的甲烷-空气湍流射流火焰进行了三维大涡模拟(LES),其统计的时均量以及脉动量符合实验测量值,且和RANS代数二阶矩湍流燃烧模型模拟结果大致符合。LES统计得到的化学反应率系数脉动和甲烷浓度脉动的互关联与对应的时均量梯度的乘积分布趋势相同,大小幅值的位置也相对应,与二阶矩湍流燃烧模型的封闭假设相符,验证了二阶矩代数燃烧模型的合理性。     

Asymptotic robustness of standard errors in multilevel structural equation models

Data in social and behavioral sciences are often hierarchically organized. Multilevel statistical methodology was developed to analyze such data. Most of the procedures for analyzing multilevel data are derived from maximum likelihood based on the normal distribution assumption. Standard errors for parameter estimates in these procedures are obtained from the corresponding information matrix. Because practical data typically contain heterogeneous marginal skewnesses and kurtoses, this paper studies how nonnormally distributed data affect the standard errors of parameter estimates in a two-level structural equation model. Specifically, we study how skewness and kurtosis in one level affect standard errors of parameter estimates within its level and outside its level. We also show that, parallel to asymptotic robustness theory in conventional factor analysis, conditions exist for asymptotic robustness of standard errors in a multilevel factor analysis model.     

Investigation on the barrier height and inhomogeneity of nickel silicide Schottky

The apparent Schottky barrier height (SBH) of the nickel silicide Schottky contacts annealed at different temperatures was investigated based on temperature dependence of I-V characteristic. Thermionic emission-diffusion (TED) theory, single Gaussian and double Gaussian models were employed to fit I-V experimental data. It is found the single Gaussian and double Gaussian SB distribution model can give a very good fit to the I-V characteristic of apparent SBH for different annealing temperatures. Also, the apparent SBH and the leakage current increase with annealing temperatures under reverse voltage. In addition, the homogeneity of interfaces for the samples annealed at temperatures of 500 and 600 °C is much better than that of the samples annealed at temperatures of 400, 700, and 800 °C. This may result from the phase transformation of nickel silicide due to the different annealing temperatures and from the low Schottky barrier (SB) patches.