太赫兹GaAs肖特基混频二极管高频特性分析

在太赫兹波段,存在几种新的高频效应会限制混频二极管的高频特性.应用热电子发射理论和隧道理论,研究了外延层肖特基二极管的高频特性,并以截止频率为品质因数对二极管进行优化设计.研究表明,当二极管工作频率大于等离子频率时,二极管相当于一个电容,失去了混频性能;提高基底掺杂浓度可以减小基底等离子共振效应;外延层等离子频率非常重要并且在研究外延层等离子共振效应时必须考虑传输时间效应;减小阳极直径、减小外延层厚度、提高外延层掺杂浓度可以提高二极管的工作频率.这对太赫兹波段室温混频器件的研制具有重要的参考价值.     

Structural and electronic properties of type-I and type-VIII Ba8Ga16Sn30 clathrates under compression

The total energy and electronic structures for type-I (β phase) and type-VIII (α phase) Ba₈Ga₁₆Sn₃₀ clathrates under hydrostatic pressure have been investigated using density functional theory (DFT) calculations. It was found that the type-VIII phase is more stable than the type-I one at ambient conditions and that β→α phase transition can not occur under hydrostatic pressure. The band structures show that the type-I and type-VIII Ba₈Ga₁₆Sn₃₀ are indirect semiconductors with band gaps of 0.24 eV and 0.19 eV, respectively. The results suggested that type-I clathrate Ba₈Ga₁₆Sn₃₀ has a larger value of the thermoelectric (TE) power than that of type-VIII clathrate. We found that pressure tuning changes the k-point of conduction band minimum (CBM) in the Brillouin zone for β-phase, but it is not the case for α-phase. Furthermore, the results show that the pressure can change the interaction between guest atoms and the host lattice, and consequently results in the decrease of the band gap of β-phase and the increase of the band gap of α-phase, indicating that the pressure effect can play an important role in the magnitude of the TE power.     

矿化剂对铝酸钙粉的结构与光谱性能的影响

研究了矿化剂对制备铝酸钙粉的结构与性能的影响.研究中以铝矾土和石灰石为原料,加入一定量的矿化剂,混合均匀,经高温煅烧制得铝酸钙粉.借助于红外光谱、X射线粉末衍射、差热-热重分析等手段对不同原料的铝酸钙粉的结构、组成及性能进行了表征和研究,并对矿化剂在合成铝酸钙中的矿化机理进行探讨.研究表明:加入矿化剂后,可在更低温度条件下煅烧制备出铝酸钙粉,有利于节能减排.红外光谱分析、XRD分析、DTA-TG分析显示:未加矿化剂煅烧时,生成的产物主要是Ca3Al10O18,CaAl2Si2O8.加入矿化剂后煅烧生成的产物主要是易浸出Al2O3的CaAl3BO7和Ca3Al10O18,而不易浸出Al2O3的CaAl2Si2O8的含量大大降低.同时显示,加入矿化剂后,原料中的方解石(CaCO3)分解更容易;CaCO3与铝矾土反应更充分;更有利于促使铝矾土中的Al-Si键断裂,将铝矾土中的Al释放出来;并可降低铝酸钙的煅烧温度.研究还显示:加入矿化剂后,可以改变原产物的晶体结构与成分,有利于降低煅烧反应温度.     

Damage and fracture prediction of plastic-bonded explosive by digital image correlation processing

By digital correlation processing of Scanning electronic microscopy (SEM) images, the paper presents the deformation and damage analysis of an energetic material—the plastic-bonded explosive (PBX) on mesoscopic scale. The analysis is made by observing the deformation field resulted from the digital image correlation (DIC) processing of the images corresponding to the loading steps and comparing with the surface profiles of the composite material so as to visualize the matter damage near a preset crack. The results show that the local deformation disturbance can reveal the material damage even happened underneath the specimen surface. The strain distribution in the front of the preset crack, can be used to predict the propagating route of the microcrack initiated from the tip of the pre-crack, which is related to the splitting fracture of the granular-based composite under compressive loading.     

Measuring the performance of the coaxial HOM coupler on a 2-cell TESLA-shape copper cavity

Coaxial High Order Mode (HOM) couplers have been fabricated at Peking University and their RF performance has been measured on a test device consisting of a coaxial transmission line and a 2-cellTESLA-shape copper cavity. The test results on the 2-cell TESLA-shape copper cavity with HOM couplers indicate that the coupler can cut off the fundamental mode TM010 and absorb HOMs effectively after a careful adjustment. The optimal angle of the HOM coupler with the beam tube is found. The initial test results of HOM couplers are presented in this paper.     

偏瘫患者辅助下肢外骨骼设计与仿真分析

针对偏瘫患者外骨骼康复机器人降低外骨骼质量的要求,设计了一种辅助下肢外骨骼机器人,采用柔索驱动的膝关节,具有结构简单,质量轻的特点。同时利用ADAMS建立了外骨骼关节柔索驱动的动力学模型,绳索模块建立了柔索驱动模型,通过Ariel生物运动分析软件,采集髋、膝、踝关节运动数据,运用Spline函数进行了仿真分析。经过仿真分析柔索驱动在上台阶运动过程中的不同拉簧预紧力和拉簧刚度下传动特性和驱动力矩,为进一步研究设计下肢外骨骼提供依据。     

化学气相沉积法制备Zn2GeO4纳米线及其发光性质的研究

利用化学气相沉积法（CVD）,气-液-固（VLS）生长法则在表面溅有金属Au催化剂层的1 cm×1 cm的Si片上制备三元Zn₂GeO₄纳米线。X射线衍射仪（XRD）测试结果表明,锌源与锗源质量比为8：1时可成功制备出Zn₂GeO₄纳米结构;扫描电子显微镜（SEM）测试结果表明,Zn₂GeO₄纳米线直径为100 nm,长度为10~11 μm;光致发光（PL）测试结果表明,Zn₂GeO₄纳米线在432和480 nm处具有两个发光峰,最后对其生长机理进行了分析。     

面阵探测下的污染云团红外光谱仿真

研究污染云团的红外光谱仿真,对于利用仿真光谱进行光谱识别的算法研究十分重要.在单元探测器探测方式下污染云团的红外光谱仿真研究取得了一定成果,并且已经被应用于识别算法的研究工作中.针对基于成像光谱仪的污染云团识别算法研究缺乏实测数据的问题,利用具有高仿真精度的基于物理模型的污染云团扩散模型及其仿真结果网格化的特点,研究相应的云团红外光谱仿真多层模型,提出了面阵探测方式下污染云团红外光谱的仿真方法,生成了同时具有光谱维和空间维信息的数据立方体,为该研究领域提供了新的研究方法.提出的面阵探测方式下的污染云团红外光谱仿真直观地反映了污染云团的扩散,提供了完备且符合实际情况的污染云团红外光谱立方体数据,对于提高和完善红外光谱识别算法具有重要意义.