Design of wideband graded-index antireflection coatings at oblique light incidence

We suggest a design method of graded-refractive-index (GRIN) antireflection (AR) coating for s-polarized or p-polarized light at off-normal incidence. The spectrum characteristic of the designed antireflection coating with a quintic effective refractive-index profile for a given state of polarization has been discussed. In addition, the genetic algorithm was used to optimize the refractive index profile of the GRIN antireflection for reducing the mean reflectance of s- and p-polarizations. The average reflectance loss was reduced to only 0.04% by applying optimized GRIN AR coatings onto BK7 glass over the wavelength range from 400 to 800 nm at the incident angle of θ₀ =70°.     

高压下BaHfO3电子结构与光学性质的第一性原理研究

从第一性原理出发,在局域密度近似下,采用基于密度泛函理论的平面波超软赝势计算方法系统地研究了高压对BaHfO₃电子结构与光学性质的影响.能带结构分析表明;无压强和施加正压强作用时,BaHfO₃为直接带隙绝缘体,而施加负压强时,BaHfO₃则转变为间接带隙半导体;BaHfO₃的带隙随压强增加而减小,且具有明显的非线性关系.对光学性质的分析发现:施加正压强后,光学吸收带边产生蓝移;负压强作用时介电函数虚部尖峰减少,光学吸收带边产生红移;施加压强后BaHfO₃的静态介电常数和静态折射率均增大.上述研究表明施加高压有效调制了BaHfO₃的电子结构和光学性质,计算结果为BaHfO₃光电材料的设计与应用提供了理论依据.     

BaHf0.5Ti0.5O3电子结构与光学性质的第一性原理研究

基于密度泛函理论体系下的广义梯度近似（GGA）,利用第一性原理方法研究了BaHf_0.5Ti_0.5O₃的电子结构和光学性质.计算结果表明,BaHf_0.5Ti_0.5O₃是一种间接带隙半导体材料,其导带底主要由Ba、Hf和Ti的d态电子构成,价带顶则主要由O的p态、Hf和Ti的d态电子构成;理论计算的介电函数最高峰的峰位与实验结果吻合较好,相对误差小于4%;吸收系数最大峰值为2.43×10⁵cm^-1,且吸收主要集中在低能区,静态折射率为2.01,能量损失峰出现在13.24 eV处.研究结果为BaHf_0.5Ti_0.5O₃光电材料设计与应用提供了理论依据.     

Simultaneous measurement of retardation and fast axis angle of eighth-wave plate in real time

A simultaneous measurement method for the retardation and the fast axis angle of the eighth-wave plate in real time is proposed. The beam emitted from the laser passes through the circular polarizer and the eighth-wave plate to be measured successively, and then is split by the Dammann grating to form three sub-beams. They are analyzed by an analyzer array and detected by a detector array. Three detection signals are obtained simultaneously to calculate the retardation and the fast axis angle in real time. In experiments, a crystal quartz sample is measured at different fast axis angles. The average and standard deviation of its retardation respectively are 40.9°and 0.5°. The maximum measurement deviation of the fast axis angle is 2.1°. The usefulness of the method is verified.     

A new model for thermodynamic analysis on wetting behavior of superhydrophobic surfaces

Superhydrophobic surfaces have shown inspiring applications in microfluidics, and self-cleaning coatings owing to water-repellent and low-friction properties. However, thermodynamic mechanism responsible for contact angle hysteresis (CAH) and free energy barrier (FEB) have not been understood completely yet. In this work, we propose an intuitional 3-dimension (3D) droplet model along with a reasonable thermodynamic approach to gain a thorough insight into the physical nature of CAH. Based on this model, the relationships between radius of three-phase contact line, change in surface free energy (CFE), average or local FEB and contact angle (CA) are established. Moreover, a thorough theoretical consideration is given to explain the experimental phenomena related to the superhydrophobic behavior. The present study can therefore provide some guidances for the practical fabrications of the superhydrophobic surfaces.     

Preparation, magnetic and electromagnetic properties of polyaniline/strontium ferrite/multiwalled carbon nanotubes composite

Strontium ferrite particles were firstly prepared by sol-gel method and self-propagating synthesis, and then the polyaniline/strontium ferrite/multiwalled carbon nanotubes composites were synthesized through in situ polymerization approach. Structure, morphology and properties of the composite were characterized by various instruments. XRD analysis shows that the output of PANI increases with the increase of the content of MWCNTs, due to the large surface area of MWCNTs. Because of the coating of PANI, the outer diameter of MWCNTs increases from 10 nm to 20-40 nm. The electrical conductivity of the composites increases with the amount increase of MWCNTs and reaches 7.2196 S/cm in the presence of 2 g MWCNTs. The coercive force of the composites prepared with 2 g MWCNTs is 7457.17 Oe, which is much bigger than that of SrFe₁₂O₁₉ particles 6145.6 Oe, however, both the saturation magnetization and the remanent magnetization of the composite become much smaller than those of SrFe₁₂O₁₉ particles. The electromagnetic properties of the composite are excellent in the frequency range of 2-18 GHz, which mainly depend on the dielectric loss in the range of 2-9 GHz, and mainly on the magnetic loss in the range of 9-18 GHz.     

利用两色组合激光场驱动氦原子产生单个阿秒脉冲

对由波长为1600 nm和800 nm两色激光形成组合场驱动氦原子产生的高次谐波进行了研究,通过改变组合场中主要发射高次谐波期间电场的上升沿和下降沿随时间不同的变化率,使电子长路经和短路径发射谐波的特性发生变化,将由此产生的高次谐波进行叠加时可以得到更短的阿秒脉冲,再调节两束激光场的延迟时间,能够有效地实现抑制电子短路径的贡献,从而得到脉宽为33.7 as的单个阿秒脉冲.     

强激光加载下金属材料微喷回收诊断

金属材料在冲击载荷下的动态响应在许多民用工程、航空航天等领域都有重要的应用背景.而金属材料在冲击载荷下的微喷形成过程,包括微射流、碎裂以及微层裂的物理过程的研究中尚存在许多空白.介绍了国内首次在神光Ⅲ原型激光装置上开展的金属材料微喷回收实验,实现了激光加载下低密度泡沫材料对微喷颗粒的回收,对回收样品进行了X光CT分析,通过图像重建,获得了回收微喷颗粒的三维图像,以及颗粒不同形态分布、颗粒尺寸、颗粒质量等定量结果.     

基于Poincare差值散点图的心率变异性分析方法研究

在心率变异性的非线性分析中,Poincare散点图分析是一种重要手段.本文基于Poincare差值散点图(modified Poincare plot)提出了两个参数—区域分布熵和区域分布系数,用于定量描述所考察区域内散点的分布趋势,并提出对散点在4个象限中的分布进行分别计算.通过对MIT-BIH数据库中健康年轻人、健康老年人和充血性心力衰竭患者样本数据的分析,发现两参数值均呈现显著的组间差异;同时,不同象限的分析结果显示了四个象限具有不同的区分敏感性,而其中尤以第一象限的区分度为最高,反映出充血性心力衰竭患者相对健康人迷走神经调控功能的改变最为显著,与以往的生理学研究结论相符.经验证,该方法可用于短时数据,更易于扩展至临床应用.     

基于材料反射率谐振特性测试电磁参数的自由空间法

自由空间法具有非接触、非破坏性测试特点,适于材料的电磁参数测试．根据材料反射率扫频测试的特性,提出了一种基于谐振特性测试材料电磁参数的新的自由空间法．通过理论分析,研究了发生相消和相长干涉的条件,给出了应用干涉位置和材料厚度测试材料介电常数实部的理论计算公式．利用谐振峰,谷的位置及其相互关系可以计算材料介电常数虚部,而利用波谷比值法比驻波比值法容易达到更高的计算精度．