Sorption of uranium by non-living water hyacinth roots

Summary Many studies have shown that water hyacinth (Eichhornia crassipes) roots can be used to accumulate high concentrations of organic as well as inorganic pollutants. They are currently used to remediate aquatic environments and aqueous solutions. In the present study, sorption of uranium from aqueous solutions by using dried roots of water hyacinth has been investigated. The sorption of uranium was examined as a function of initial concentration, pH, weight of roots and contact time. Five different concentrations 20, 40, 60, 80, and 100 μg ^. ml^-1 were used. Sorption proves to be very rapid and depend on pH, weight of roots and concentration of uranium. Maximum sorption capacity of water hyacinth roots was 64,000 U⁶⁺ μg/g. The sorption of uranium by water hyacinth roots follows a Langmuir isotherm.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7): a structure with tunable density of Na(+) vacancies

A series of samples with the composition Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7) (0 < x < or = 1) was investigated and a hexagonal structure with unusually large range of homogeneity (at least from x = 0.01 to 0.95) was revealed. The hexagonal phase consists of [Al(2)B(2)O(7)](infinity)(2)(-) lamellae stacked along the c axis, as in CaAl(2)B(2)O(7) and Na(2)Al(2)B(2)O(7). Nevertheless, the configuration and stacking sequence of the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae are different in these three structures. In the hexagonal structure of Ca(1)(-)(x)()Na(2)(x)()Al(2)B(2)O(7), Ca and half Na cations (Na1) statistically occupy the same crystallographic site which is located between the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae, the other half Na cations (Na2) distribute in the planes bisecting the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae. Depending on the composition, the site occupation factor of Na2 site can vary in the same range as x, leading to a tunable density of Na(+) vacancies in the structure. The AlO(4) tetrahedra and BO(3) triangles in the structure tilt in appropriate ways to improve the bond valence sum of Na2 cations which are not sufficiently bonded to the anions.     

三重四极杆电感耦合等离子体质谱(ICP-MS)法测定氧化铕中13种稀土杂质元素

稀土杂质元素直接影响高纯单金属稀土材料的整体性能,是高科技领域许多材料的重要组成部分。通过考察最佳的消解酸量、温度、时间、氧气反应气流量、稀释气流量,建立了基于三重四极杆电感耦合等离子体质谱仪(ICP-MS/MS)直接测定氧化铕中13种稀土杂质元素分析方法。该方法采用0.1%基体直接进样,可以很大程度提高前处理分析效率。利用碰撞模式测定氧化铕稀土中的Y、La、Pr、Nd、Sm、Gd、Tb、Dy、Ho、Er、Yb、Lu元素,氧气质量转移模式测定氧化铕中的Tm,两种模式结合可以有效去除多原子干扰,实现氧化铕的稳定测试分析。通过对氧化铕标准物质（GBW02902）直接测定分析,结果表明,在碰撞和氧气质量转移模式下,各元素线性相关系数（r）均大于 0.9999,方法检出限为0.001~0.023 mg/kg,测试精密度优于1.99%,13种元素的测试值都在认定值的不确定度范围之内。该分析方法操作简单,测试稳定,效率高,为实验室进行氧化铕材料中REE杂质的准确测试分析提供思路和借鉴。     

Joint Optimization of Control Strategy and Energy Consumption for Energy Harvesting WSAN

With the rapid development of wireless sensor technology, recent progress in wireless sensor and actuator networks (WSANs) with energy harvesting provide the possibility for various real-time applications. Meanwhile, extensive research activities are carried out in the fields of efficient energy allocation and control strategy design. However, the joint design considering physical plant control, energy harvesting, and consumption is rarely concerned in existing works. In this paper, in order to enhance system control stability and promote quality of service for the WSAN energy efficiency, a novel three-step joint optimization algorithm is proposed through control strategy and energy management analysis. First, the optimal sampling interval can be obtained based on energy harvesting, consumption, and remaining conditions. Then, the control gain for each sampling interval is derived by using a backward iteration. Finally, the optimal control strategy is determined as a linear function of the current plant states and previous control strategies. The application of UAV formation flight system demonstrates that better system performance and control stability can be achieved by the proposed joint optimization design for all poor, sufficient, and general energy harvesting scenarios.     

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

In this paper, by capturing the atomic information and reflecting the behaviour governed by the nonlinear potential function, an analytical molecular mechanics approach is proposed. A constitutive relation for single-walled carbon nanotubes (SWCNT’s) is established to describe the nonlinear stress-strain curve of SWCNT’s and to predict both the elastic properties and breaking strain of SWCNT’s during tensile deformation. An analysis based on the virtual internal bond (VIB) model proposed by P. Zhang et al. is also presented for comparison. The results indicate that the proposed molecular mechanics approach is indeed an acceptable analytical method for analyzing the mechanical behavior of SWCNT’s. The project supported by the National Natural Science Foundation of China (10121202, 90305015 and 10328203), the Key Grant Project of Chinese Ministry of Education (0306) and the Research Grants Council of the Hong Kong Special Administrative Region, China (HKU 7195/04E).     

A Fault Detection Method for Electrohydraulic Switch Machine Based on Oil-Pressure-Signal-Sectionalized Feature Extraction

A turnout switch machine is key equipment in a railway, and its fault condition has an enormous impact on the safety of train operation. Electrohydraulic switch machines are increasingly used in high-speed railways, and how to extract effective fault features from their working condition monitoring signal is a difficult problem. This paper focuses on the sectionalized feature extraction method of the oil pressure signal of the electrohydraulic switch machine and realizes the fault detection of the switch machine based on this method. First, the oil pressure signal is divided into three stages according to the working principle and action process of the switch machine, and multiple features of each stage are extracted. Then the max-relevance and min-redundancy (mRMR) algorithm is applied to select the effective features. Finally, the mini batch k-means method is used to achieve unsupervised fault diagnosis. Through experimental verification, this method can not only derive the best sectionalization mode and feature types of the oil pressure signal, but also achieve the fault diagnosis and the prediction of the status of the electrohydraulic switch machine.     

An Encryption Algorithm for Region of Interest in Medical DICOM Based on One-Dimensional eλ-cos-cot Map

Today, with the rapid development of the Internet, improving image security becomes more and more important. To improve image encryption efficiency, a novel region of interest (ROI) encryption algorithm based on a chaotic system was proposed. First, a new 1D eλ-cos-cot (1D-ECC) with better chaotic performance than the traditional chaotic system is proposed. Second, the chaotic system is used to generate a plaintext-relate keystream based on the label information of a medical image DICOM (Digital Imaging and Communications in Medicine) file, the medical image is segmented using an adaptive threshold, and the segmented region of interest is encrypted. The encryption process is divided into two stages: scrambling and diffusion. In the scrambling stage, helical scanning and index scrambling are combined to scramble. In the diffusion stage, two-dimensional bi-directional diffusion is adopted, that is, the image is bi-directionally diffused row by column to make image security better. The algorithm offers good encryption speed and security performance, according to simulation results and security analysis.