Spherical harmonic representation of the gravitational coupling between a truncated sector of a hollow cylinder and an arbitrary gravitational source: Relevance to the STEP experiment

The gravitational interaction between grooves machined in a hollow cylindrical mass of uniform density, and an external point mass, is derived in terms of the Associated Legendre functions, and the parametric form of the coupling coefficients is presented. The cross-sections of the grooves, which are regularly spaced in azimuth, are in the form of truncated sectors of the cylinder's end-faces. This theory is applied to the test-masses for the Satellite Test of the Equivalence Principle (STEP) experiment, for which four grooves have been assumed, and an expression for the axialforce is derived which is more than 10⁴ times faster to compute than a Monte-Carlo integration of similar accuracy. Following this analysis it is suggested that the STEP test-masses should carry at least 6 grooves. This theory has wider application to gravitational problems involving general sectored cylindrical bodies.     

金属羰基化合物（CpFe（CO）2）2与金属氧化物表面作用的傅里叶变…

用漫反射红外光谱和光声红外光谱研究了金属羰基化合物（ＣｐＦｅ（ＣＯ）２）２Ｃｐ＝η＾５－Ｃ５Ｈ５与酸性，中性和碱性Ａｌ２Ｏ３及ＴｉＯ２的相互作用，结果表明，在Ａｌ２Ｏ３表面生成的洗生物种类及浓度与Ａｌ２Ｏ３的酸碱度明显相关，在酸性Ａｌ２Ｏ３表面，主要存在衍生物（ＣｐＦｅ（ＣＯ）２Ｆｅ－Ｈ－Ｆｅ（ＣＯ２Ｃｐ）＾＋及少量的ＣｐＦｅ（ＣＯ）２（－Ｏ－）；在中性Ａｌ２Ｏ３表面存在的ＣｐＦｅ（ＣＯ）２（－Ｏ     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

用激活性非线性介质Nd：MgO：LiNbO3产生二次谐波

以Nd:MgO:LiNbO_3同时兼作激活介质和非线性光学材料,研究自倍频激光器。用小型氙灯泵浦,在室温下获得二次谐波激光(0.547μm) 阈值小于4.8'J,最大输出400μJ/shot,工作温度范围大于20℃～45℃,无光损伤。     

叶绿素A较高激发态的发光

采用激发样品表层和样品中心两种激发方式,在300K和77K温度下研究叶绿素A(Chla)的较高激发行为,观测到峰值位于493、520和580nm三条新的荧光发射带.分别测量它们的荧光激发光谱,证明这三条新的荧光带属于Chla的第二激发单线态向基态的不同振动能级的辐射跃迁发光.最后提出电子跃迁模型,同时进行了讨论.     

金催化化学发光新体系——苯并吡喃化学发光分析法测定金矿中的痕量金

本文提出了一种测定矿样中痕量金的化学发光分析法,氯化6,7-二羟基-2,4-二甲基苯并吡喃-H_2O_2化学发光体系,方法的检出限为7ppb。工作曲线线性范围是10～1000ppbAu,测定的相对标准偏差小于7％。应用本法测定矿样中的金,结果良好。     

Four-wave mixing based 10-Gb/s tunable wavelength conversion in dispersion-flattened microstructure fibers

All-optical wavelength conversion of 10-Gb/s signal based on four-wave mixing is experimentally demonstrated in a 30-m-long dispersion-flattened microstructure fiber with small positive dispersion. For an average pump power of 26 dBm, the conversion efficiency was around -19.5 dB with the fluctuation less than ±1.4 dB, covering a conversion bandwidth of 20 nm. The eye diagram of the converted signal shows good eye opening.     

Growth and optical properties of a new self-Q-switched laser crystal: Cr:Yb3Al5O12

Cr⁴⁺:YbAG (Cr⁴⁺:Yb₃Al₅O₁₂) crystal with a size up to Φ24 mm×30 mm was grown by the Czochralski method. In the absorption spectrum, there are two absorption bands at 939 and 969 nm, respectively, which are suitable for InGaAs diode laser pumping, and there is an absorption band at 1030 nm, which is suitable for passive Q-switched laser output at 1.03 μm. A broad emission spectrum from 970 to 1100 nm was exhibited from 940 nm wavelength pumping. This crystal is promising as a self-Q-switched laser crystal used for compact, efficient, highly stable, passive self-Q-switched thin chip solid-state lasers.     

Transfer matrix approach of vibration isolation analysis of periodic composite structure

The transmission properties of elastic waves propagating in a three-dimensional composite structure embedded periodically with spherical inclusions are analyzed by the transfer matrix method in this paper. Firstly, the periodic composite structures are divided into many layers, the transfer matrix of monolayer structure is deduced by the wave equations, and the transfer matrix of the entire structure is obtained in the case of boundary conditions of displacement and stress continuity between layers. Then, the effective impedance of the structure is analyzed to calculate its reflectivity and transmissivity of vibration isolation. Finally, numerical simulation is carried out; the experiment results validate the accuracy and feasibility of the method adopted in the paper and some useful conclusions are obtained. Project (No. 50075029) supported by the National Natural Science Foundation of China.