SiGe (Ge-dot) heterojunction phototransistors for efficient light detection at 1.3–1.55 μm

The aim of this work is to develop a Si/SiGe HBT-type phototransistor with several Ge dot layers incorporated in the collector, in order to obtain improved light detectivity at 1.3–1.55 μm. The MBE grown HBT detectors are of n–p–n type and based on a multilayer structure containing 10 Ge-dot layers (8 ML in each layer, separated by 60 nm Si spacer) in the base-collector junction. The transistors were processed for normal incidence or with waveguide geometry where the light is coupled through the edge of the sample. The measured breakdown voltage, BV_ceo, was about 6 V. Compared to a p–i–n reference photodiode with the same dot layer structure, photoconductivity measurements show that the responsivity is improved by a factor of 60 for normal incidence at 1.3 μm. When the light is coupled through the edge of the device, the detectivity is even further enhanced. The measured photo-responsivity is more than 100 and 5 mA/W at 1.3 and 1.55 μm, respectively.     

Vanishing Shear Viscosity Limit in the Magnetohydrodynamic Equations

We study an initial boundary value problem for the equations of plane magnetohydrodynamic compressible flows, and prove that as the shear viscosity goes to zero, global weak solutions converge to a solution of the original equations with zero shear viscosity. As a by-product, this paper improves the related results obtained by Frid and Shelukhin for the case when the magnetic effect is neglected. Supported by NSFC (Grant No. 10301014, 10225105) and the National Basic Research Program (Grant No. 2005CB321700) of China.     

负离子元素杂质破坏模型

探讨了HfO₂薄膜中负离子元素杂质破坏模型，并得出薄膜中的杂质主要来源于 镀膜材料. 用电子束蒸发方法沉积两种不同Cl元素含量的HfO₂薄膜，测定薄膜 弱吸收和损伤阈值来验证负离子元素破坏模型. 结果表明，随着Cl元素含量的增加薄膜的弱 吸收增加损伤阈值减小. 这主要是因为负离子元素在蒸发过程中形成挥发性的气源中心而产 生缺陷，缺陷在激光辐照过程中又形成吸收中心. 因此负离子元素的存在将加速薄膜的破坏 . 关键词： 负离子元素杂质 缺陷 吸收     

Novel platinum-containing initiators for ring-opening polymerizations

A novel class of platinum-based initiating systems for the ring-opening polymerization of a wide variety of heterocyclic compounds including epoxides, oxetanes, and 1,3,5-trioxane have been discovered. In addition to a platinum complex as a catalyst, a cocatalyst, consisting of a compound or polymer containing silicon-hydrogen bonds must also be present. This article reports on a preliminary survey of the scope and limitations of these new initiator systems. Particular emphasis in this article has been placed on the ring-opening polymerization of epoxides which have been studied in some detail and which proceed rapidly and exothermically at room temperature. A number of mechanistic studies have been conducted and the best current evidence suggests that polymerization proceeds by a cationic mechanism. Evidence is also presented which suggests that platinum metal colloids may function as the active initiating species.     

叠层连续开口圆柱壳的精确解

抛弃任何有关位移和应力模式的假设，引入δ-函数，对正变异性连续开口圆柱壳建立状态方程．给出薄的、中厚的和强厚的叠层连续开口圆柱壳静力问题的统一的精确解．数值结果和SAPS解进行了对比．     

镁掺杂对In2O3电导和气敏性能的影响

用共沉淀法制备了Mg2 + 掺杂的In2 O3 纳米粉 ,研究了镁掺杂对In2 O3 电导和气敏性能的影响 .结果表明 :MgO和In2 O3 间可形成有限固溶体In2 -xMgxO3 (0≤x≤ 0 .40 ) ;MgIn× 电离的空穴对材料导带电子的湮灭 ,使掺镁纳米粉的电导变得很小 ;n(Mg2 + )∶n(In3 + ) =1∶2共沉淀物于 90 0℃下热处理 4h ,用所得的纳米粉制作的传感器在 32 0～ 370℃下 ,对 45 μmol/LC2 H5OH的灵敏度达 10 2 .5 ,为相同浓度干扰气体Petrol的 12倍多 .     

3族新的不含紧优与几乎紧优的有向双环网络无限族

给出了3族新的不含紧优与几乎紧优的有向双环网络.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

早期火灾图像监测技术的应用与比较

本文对可提供图像信息的火灾物理现象进行了具体分析，讨论了利用摄像技术进行早期火灾探测的可能性、使用条件以及图像监测技术在火灾探测中的地位和作用，进行了若干种图像监测技术的对比实验，得出了相应的结论。