Improved Programming Efficiency through Additional Boron Implantation at the Active Area Edge in 90nm Localized Charge-Trapping Non-volatile Memory

As the scaling-down of non-volatile memory （NVM） cells continues, the impact of shallow trench isolation （STI） on NVM cells becomes more severe. It has been observed in the 90nm localized charge-trapping non-volatile memory （NROMTM） that the programming efficiency of edge cells adjacent to STI is remarkably lower than that of other cells when channel hot electron injection is applied. Boron segregation is found to be mainly responsible for the low programming efficiency of edge cells. Meanwhile, an additional boron implantation of 10°tilt at the active area edge as a new solution to solve this problem is developed.     

A new search for the atomic EDM of 129Xe at FRM-II

Permanent electric dipole moments (EDMs) arise due to the breaking of time-reversal or, equivalently, CP-symmetry. Although EDM searches have so far only set upper limits, which are many orders of magnitude larger than Standard Model (SM) predictions, the motivation for more sensitive searches is stronger than ever. A new effort at FRM-II incorporating ¹²⁹Xe and ³He as a co-magnetometer can potentially improve the current limit. The noble gas mixture of ¹²⁹Xe and ³He is simultanously polarized by spin-exchange optical pumping and then transferred into a high-performance magnetically shielded room. Inside, both species can freely precess in the presence of applied magnetic and electric fields. The precession signals are detected by LTc SQUID sensors. In EDM cells with silicon electrodes we observed spin lifetimes in excess of 2500 s without and with high-voltage applied. This meets one requirement to achieve our goal of improving the EDM limit on ¹²⁹Xe by several orders of magnitude.     

Facile and scalable fabrication engineering of fullerenol nanoparticles by improved alkaline-oxidation approach and its antioxidant potential in maize

A feasible in operation, labor-saving and low-cost one-step technology to fabricate fullerenol nanoparticles (FNPs) up to 10 g in laboratory was developed by improved alkaline-oxidation approach using moderately concentrated sodium hydroxide solution as the hydroxylation agent and o-dichlorobenzene as the solvent. This strategy paves the avenue for industrial-scale bulk production of FNPs. The resulted product, [C₆₀(OH)₂₂·8H₂O]_n, were characterized by various measurements including matrix-assisted laser desorption ionization time-of-flight mass spectrometry, high-resolution ¹H nuclear magnetic resonance spectrometry, Fourier transform infrared spectroscopy, UV-Visible spectrophotometer, thermogravimetric analysis, differential scanning calorimetry, dynamic light scattering analysis, scanning electron microscopy, and electron spin resonance spectrometer. Radical scavenging assay in vitro confirmed the high efficiency of water-soluble [C₆₀(OH)₂₂·8H₂O]_n as a novel radical scavenger. Furthermore, [C₆₀(OH)₂₂·8H₂O]_n as an excellent candidate has the potential to serve as the plant defense stimulation agent in maize.

Open image in new window

Graphical abstract ?

     

Improved multiparty quantum key agreement in travelling mode

The need to simultaneously balance security and fairness in quantum key agreement (QKA) makes it challenging to design a flawless QKA protocol, especially a multiparty quantum key agreement (MQKA) protocol. When designing an MQKA protocol, two modes can be used to transmit the quantum information carriers: travelling mode and distributed mode. MQKA protocols usually have a higher qubit efficiency in travelling mode than in distributed mode. Thus, several travelling mode MQKA protocols have been proposed. However, almost all of these are vulnerable to collusion attacks from internal betrayers. This paper proposes an improved MQKA protocol that operates in travelling mode with Einstein-Podolsky-Rosen pairs. More importantly, we present a new travelling mode MQKA protocol that uses single photons, which is more feasible than previous methods under current technologies.     

基于虚拟仪器技术和网络的综合实验控制系统设计

为实现大型物理实验现场复杂多样的仪器控制,分析了物理实验的特点、过程、环境及仪器控制功能需求,利用虚拟仪器技术、计算机网络技术和数据库技术,建立了一套集成硬件和软件的综合控制管理信息系统,实现记录系统中示波器状态远程批量设置及波形数据自动采集、控制探测系统的高压电源并发加压或退压、保障各测试项目间测试仪器之间时间关联、监控UPS电量和远端现场图片或视频状态。给出了系统的关键的设计思路,列举了某型示波器控制的通用控制代码。结果表明,系统达到了一人总控或多人分权控制实验过程中多种多台仪器的目标,方便快捷地实现不同品牌不同类型示波器的相同功能。     

低β 162.5 MHz taper型HWR腔的机械性能分析（英文）

北京大学正在设计β=0.09,频率为162.5 MHz taper型的二分之一波长射频超导谐振腔(HWR腔),这种腔针对高流强质子束(约100mA)和氘束(约50mA)的加速而设计。对于这种超导腔而言机械性能分析是十分重要的,可以通过机械性能分析来估计由于腔体的形变带来的频率偏移。用ANSYS分析了由于液氦压力不稳定造成的麦克风效应以及洛伦兹力造成的腔体失谐,并且对沿腔体轴线方向的调谐进行了分析。模拟结果显示这只腔压力敏感系数为31.1 Hz/kPa,洛伦兹力系数为-0.41Hz/(MV·m~(-1))~2。腔体的调谐范围达到±177kHz,足够补偿腔体可能的频率偏移。腔体的机械性能满足腔体正常运行的要求。     

High pressure infiltration sintering behavior of WC-Co alloys

In this paper, two average tungsten carbide particle sizes of 2, 0.5?μm are placed respectively, in contact with a WC-16Co substrate, pressed at the pressure of 4.5–5.5?GPa, and heated to temperatures ranging from 1350°C to 1500°C in a large-volume cubic press. During the process Co was forced out of the WC-16Co substrate into the compressed powder. The resulting infiltrated samples were characterized using X-ray diffraction (XRD), scanning electron microscope (SEM), Vickers hardness and cutting performance tests. The results of XRD confirmed that the sintered bulks have WC and Co phases. The scanning electron microscopy (SEM) analysis reveals that the WC grains in well-sintered alloys are round in shape and cobalt with lower content is uniformly dispersed in the WC grain boundaries. The sintered sub-micron WC-Co alloy with a cobalt content of 3.8?wt% exhibits a prominent combination of high hardness value of 23.1?GPa and a large fracture toughness value of 8.6?MPa?m^½. The high-speed cutting tests indicating its cutting performance is significantly superior to the commercial YG6X (WC-6?wt%Co with WC grain size of 0.5?μm).     

A W-Band Frequency Tracing Transceiver System

In millimeter-wave, phase-locked oscillators are often used because the frequency drift of oscillators is very large. However, they are very complex. In this paper, a W-band frequency tracing transceiver system is presented and tested, which is used for digital communication. Although the communication distance is less than that of phase-locked systems, the scheme is simple and the cost is low.     

Fe/Cu(110)表面CO吸附HREELS和ARUPS研究

Fe/Cu(110)表面CO吸附HREELS和ARUPS研究