Low-temperature electrothermal vaporization of thenoyltrifluoroacetone complex of Sc(III) and Y(III) for sample introduction in an inductively coupled plasma atomic emission spectrometry,and their determination in biological samples

A new method for inductively coupled plasma atomic emission spectrometry (ICP-AES) determination of trace Sc and Y, based on gaseous compound introduction into the plasma as their thenoyltrifluoroacetone (TTA) complexes by electrothermal vaporization was developed. Using the reagent TTA as chemical modifier can not only enhance the analytical signals, but also reduce the vaporization temperature. At a temperature of 1,000 °C the trace Sc and Y can be vaporized completely into ICP. The factors affecting the formation of the chelate and its vaporization behavior, such as drying time, vaporization temperature/time, reaction medium and the amount of TTA, were investigated in detail. Under the optimized conditions (drying temperature/time 100 °C/10 s, vaporization temperature/time 1,000 °C/4 s), the limits of detection for Sc and Y were 19 pg and 34 pg (3), respectively, and the relative standard deviations for Sc and Y were 4.2% (c _Sc=0.2 g mL^–1; n=7) and 2.6% (c _Y=0.5 g mL^–1; n=7). The linear ranges of the calibration graphs cover three orders of magnitude. The method was applied to the analysis of the biological reference materials (GBW 07602, bush branches and leaves; GBW 07604, poplar leaves), and the results obtained were in good agreement with the certified values.     

Catalysis of ring-opening and vinyl polymerizations by dicobaltoctacarbonyl

In the presence of Si? H containing cocatalysts, dicobaltoctacarbonyl has been found to very efficiently catalyze the ring-opening polymerization of cyclic ethers, especially epoxides, as well as certain vinyl monomers. The reaction conditions employed are very similar to those used in Co₂(CO)₈ catalyzed hydrogenation and hydrosilylation reactions. Detailed investigations have been carried out to elucidate the nature of the active species for this catalytic system. A cationic mechanism is proposed based on the experimental results of those investigations.     

An efficient synthesis of novel spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] building block for blue light-emitting materials

We have developed efficient synthetic routes to obtain a novel building block spiro[[8H]indeno[2,1-b]thiophene-8,9′-fluorene] (SITF), a monothiophene-containing spirobifluorene analogue, and constructed blue light-emitting materials, including 2′,7′-bis([1,1′-biphenyl]-4-yl)-spiro[indeno[2,1-b]thiophene-8,9′-fluorene] (BBP-SITF) and 2′,7′-bis(9,9′-spirobifluoren-2-yl)spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] (BSBF-SITF). BSBF-SITF has shown to be a stable blue light-emitting material with high PL quantum efficiency (89%) and unique regioselective feature at the C2 of thiophene, which indicate that BSBF-SITF will be useful for constructing complicated optoelectronic systems.     

Molecular mechanics calculations (MM3) on sulfones

The structures of several sulfones, including dimethyl sulfone, methyl ethyl sulfone, methyl vinyl sulfone, and diphenyl sulfone, have been fit with the MM3 force field to existing experimental data from electron diffraction and microwave spectroscopy. The vibrational spectra have also been fit for six of these compounds. The torsional parameters for the aliphatic sulfones were fit to ab initio 6-31G data. Heats of formation were also fit. © 1993 John Wiley & Sons, Inc.     

A facile reaction involving zwitterionic intermediates for the synthesis of 5-hydroxy-2H-pyrrol-2-one derivatives

The reaction of cyclohexyl isocyanide with various aldehydes and 1,3-dicarbonyl compounds catalyzed by piperidine is described. The protocol offers facile and efficient synthesis of 5-hydroxy-2H-pyrrol-2-one derivatives from readily available starting materials in high yields.     

1,9-Bis(N,N-dimethylaminomethyl)dipyrromethanes in the synthesis of porphyrins bearing one or two meso substituents

A synthesis of 5,15-disubstituted zinc-porphyrins has been developed that employs condensation of a 1,9-bis(N,N-dimethylaminomethyl)dipyrromethane+a dipyrromethane in refluxing ethanol containing zinc acetate followed by oxidation with DDQ. The N,N-dimethylaminomethylation of the dipyrromethane was achieved via Eschenmoser's reagent (N,N-dimethylmethyleneammonium iodide) in CH₂Cl₂ at room temperature. The synthesis is compatible with diverse substituents (e.g., alkyl, aryl, ester, acetal) and enables rapid synthesis of trans-AB-, A₂-, and A-porphyrins. The synthesis of >40 zinc porphyrins has been surveyed; 13 zinc porphyrins were isolated in yields of 5-20% without detectable scrambling.     

Modeling Pb sorption to microporous amorphous oxides as discrete particles and coatings

Hydrous amorphous Al (HAO), Fe (HFO), and Mn (HMO) oxides are ubiquitous in the subsurface as both discrete particles and coatings and exhibit a high affinity for heavy metal contaminants. To assess risks associated with heavy metals, such as Pb, to the surrounding environment and manage remedial activities requires accurate mechanistic models with well-defined transport parameters that represent sorption processes. Experiments were conducted to evaluate Pb sorption to microporous Al, Fe, and Mn oxides, as well as to montmorillonite and HAO-coated montmorillonite. Intraparticle diffusion, a natural attenuating process, was observed to be the rate-limiting mechanism in the sorption process, where best-fit surface diffusivities ranged from 10(-18) to 10(-15) cm(2) s(-1). Specifically, diffusivities of Pb sorption to discrete aluminum oxide, aluminum oxide-coated montmorillonite, and montmorillonite indicated substrate surface characteristics influence metal mobility where diffusivity increased as affinity decreased. Furthermore, the diffusivity for aluminum oxide-coated montmorillonite was consistent with the concentrations of the individual minerals present and their associated particle size distributions. These results suggest that diffusivities for other coated systems can be predicted, and that oxide coatings and montmorillonite are effective sinks for heavy metal ions.     

Isolation and purification of flavonoid glycosides from Trollius ledebouri using high-speed counter-current chromatography by stepwise increasing the flow-rate of the mobile phase

Three flavonoid glycosides including orientin, vitexin, quercetin-3-O-neohesperidoside and one unknown compound were isolated and purified by high-speed counter-current chromatography (HSCCC) and semi-preparative HPLC from Trollius ledebouri Reichb., a traditional Chinese medicine. Preparative HSCCC with a two-phase solvent system composed of ethyl acetate-n-butanol-water (2:1:3, v/v/v) was successfully performed by increasing the flow-rate of the mobile phase from 1.5 to 2.5 ml/min after 190 min. Consequently, 95.8 mg orientin, 11.6 mg vitexin, 9.3 mg unknown compound with purities of over 97% and one partially purified peak fraction (contained quercetin-3-O-neohesperidoside at 85.1% purity) were obtained from 500 mg of the crude extract. Then the partially purified fraction was further purified by reversed-phase semi-preparative high-performance liquid chromatography. The structure identification of all pure fractions was carried out by UV, MS, 1H NMR and 13C NMR.     

氨基酸柱前衍生化的3种新荧光试剂的光谱特性及高效液相色谱研究

合成了３种新的荧光标记试剂：吖啶－Ｎ－乙酰氯，咔唑－９－乙酰氯和咔唑－９－丙酰氯。它们的最大发射降激发波长分别为４３０ｎｍ，３６８ｎｍ，和３６５ｎｍ。３种衍生化试剂与氨基酸形成的衍生物在ｐＨ６．５的条件下结合梯度洗脱程序在Ｃ１８反相柱上对色谱条件进行了优化。     

〔Co(H2O)4(NCS)2〕(18-冠-6)的分子和晶体结构

[Co(H_2O)_4(NCS)_2](18-冠-6)的晶体属于正交晶系,空间群:D-P。晶胞参数:a=9.167(2)A,b=13.268(1)A,c=19.292(3)A,Z=4。结构用重原子法解出,经最小二乘法修正,最终的=0.029。钴(Ⅱ)与两个异硫氰酸根、四个水分子配位,形成顺式八面体配位单元,并通过其中的水分子与18-冠-6以氢键相结合,形成标题的分子和晶体。