Through-space charge transfer blue polymers containing acridan donor and oxygen-bridged triphenylboron acceptor for highly efficient solution-processed organic light-emitting diodes

Three kinds of through-space charge transfer(TSCT) blue polymers containing non-conjugated polystyrene backbone together with spatially-separated acridan donor and oxygen-bridged triphenylboron acceptors having different substituents of tert-butyl,hydrogen and fluorine are designed and synthesized. The designed TSCT blue polymers possess photoluminescence quantum yields up to 70% in solid-state film, single-triplet energy splitting below 0.1 eV, and typical thermally activated delayed fluorescence(TADF) effect. Meanwhile, the resulting polymers exhibit aggregation-induced emission(AIE) effect with emission intensity increased by up to ～27 folds from solution to aggregation state. By changing the substituent of acceptors to tune the charge transfer strength, blue emission with peaks from 444 to 480 nm can be realized for the resulting polymers.Solution-processed organic light-emitting diodes based on the polymers exhibit excellent device performance with Commission Internationale de L'Eclairage(CIE) coordinates of(0.16, 0.27), together with the maximum luminous efficiency of 30.7 cd A~(-1) and maximum external quantum efficiency of 15.0%, which is the best device efficiency for blue TADF polymers.     

Coupled Electrical Conduction in Coordination Polymers: From Electrons/Ions to Mixed Charge Carriers

The coupled transport of ions and electrons is of great potential for next‐generation sensors, energy storage and conversion devices, optoelectronics, etc. Coordination polymers (CPs) intrinsically have both transport pathways for electrons and ions, however, the practical conductivities are usually low. In recent years, significant advances have been made in electronic or ionic conductive coordination polymers, which also results in progress in mixed ionic‐electronic conductive coordination polymers. Here we start from electronic and ionic conductive CPs to mixed ionic‐electronic conductive CPs. Recent advances in the design of mixed ionic‐electronic conductive CPs are summarized. In addition, devices based on mixed conduction are selected.     

Skin Friction Reduction of Hypersonic Body by Supersonic Layer

Fluid Dynamics - Both numerical methods and wind tunnel tests were used to reduce skin friction for a hypersonic body. A hypersonic cone was tested under three different free-stream flow...     

Numerical and Experimental Investigation of Liquid Residue in 90° Bend Microchannel Based on Gas–Liquid Two-Phase Flow

The microfluidic chip for nucleic acid detection in vitro is an essential application of microfluidic technology to the process of in vitro diagnosis. The 90° bend microchannels in chip designed for facilitating assay reagent delivery may cause reagent residues and cast mutual contamination between detection reagents, which significantly affects the detection accuracy. In this paper, a two-dimensional gas–liquid two-phase flow model is constructed to simulate the liquid residue phenomenon. Using the results of simulation, the residual liquid generation can be observed and the area of residual liquid can be obtained. The accuracy of the numerical simulation is verified by comparison with the experimental results. The effects of the fillet radius R, the diameter ratio d₁/d₂ of the vertical to horizontal sections, the flow velocity v, and the surface roughness R_a on the residual amount are studied. We find that the fillet radius is inversely proportional to the residual amount within the range v = 20–100 mm/s and there is almost no liquid residue in the channel when the radius increases to R = 1 mm. When the channel diameter ratio d₁/d₂ increases, the liquid residual amount also increases by approximately 98%. The increased surface roughness R_a significantly increases the residual amount. The results of this study provide a reference for the optimal design of microchannels on chips.

     

Study on wave dispersion characteristics of piezoelectric sandwich nanoplates considering surface effects

In this study, the wave propagation properties of piezoelectric sandwich nanoplates deposited on an orthotropic viscoelastic foundation are analyzed by considering the surface effects (SEs). The nanoplates are composed of a composite layer reinforced by graphene and two piezoelectric surface layers. Utilizing the modified Halpin-Tsai model, the material parameters of composite layers are obtained. The displacement field is determined by the sinusoidal shear deformation theory (SSDT). The Euler-Lagrange equation is derived by employing Hamilton’s principle and the constitutive equations of piezoelectric layers considering the SEs. Subsequently, the nonlocal strain gradient theory (NSGT) is used to obtain the equations of motion. Next, the effects of scale parameters, graphene distribution, orthotropic viscoelastic foundation, and SEs on the propagation behavior are numerically examined. The results reveal that the wave frequency is a periodic function of the orthotropic angle. Furthermore, the wave frequency increases with the increase in the SEs.

     

八信道高温超导多路器的实验研究

文中首先分析八信道高温超导多路器设计的方案,以及实现八信道高温超导多路器的技术;给出了用MgO基片为衬底,YBCO超导膜制备的高温超导滤波器设计仿真曲线及实际测试曲线;并对多路器所用制冷器的制冷量进行了计算;最后给出八信道高温超导多路器的实际测试曲线。     

带有双X型铁心框架的超导MRI磁体的设计

文中对带有双X型铁心框架的MR I用高温和低温超导磁体的设计进行了介绍,包括项目的市场需求、磁体的基本参数和系统热负荷的预设计结果等。     

Origin用于物理化学实验数据的非线性拟合

在物理化学实验数据处理中应用Origin软件对数据进行非线性拟合,介绍用Origin求得实验曲线的非线性拟合参数的方法。结果表明,使用该软件能降低数据处理的随意性,减少处理误差,并且快捷方便,使实验结果更合理。     

Gaussview在化学教学中的一些应用

Gaussian量子化学计算程序包是美国Gaussian公司开发的一个功能强大的量子化学综合软件包。可执行各类不同精度的分子轨道计算(包括Hartree-Fock水平从头算(HF)、Post-HF从头算、密度泛函理论(DFT)以及多种半经验量子化学方法),进行分子和化学反应性质的理论预测。目前已成为国     

Instability analysis for semi-active control systems with semi-active inerters

Nonlinear Dynamics - In this paper, the instability of semi-active control systems caused by the utilization of semi-active inerters is analyzed. The purpose of this study is to demonstrate the...