Decomposition of methane over alumina supported Fe and Ni–Fe bimetallic catalyst: Effect of preparation procedure and calcination temperature

Catalytic decomposition of methane has been studied extensively as the production of hydrogen and formation of carbon nanotube is proven crucial from the scientific and technological point of view. In that context, variation of catalyst preparation procedure, calcination temperature and use of promoters could significantly alter the methane conversion, hydrogen yield and morphology of carbon nanotubes formed after the reaction. In this work, Ni promoted and unpromoted Fe/Al₂O₃ catalysts have been prepared by impregnation, sol–gel and co-precipitation method with calcination at two different temperatures. The catalysts were characterized by X-ray diffraction (XRD), N₂ physisorption, temperature programmed reduction (TPR) and thermogravimetric analysis (TGA) techniques. The catalytic activity was tested for methane decomposition reaction. The catalytic activity was high when calcined at 500 °C temperature irrespective of the preparation method. However while calcined at high temperature the catalyst prepared by impregnation method showed a high activity. It is found from XRD and TPR characterization that disordered iron oxides supported on alumina play an important role for dissociative chemisorptions of methane generating molecular hydrogen. The transmission electron microscope technique results of the spent catalysts showed the formation of carbon nanotube which is having length of 32–34 nm. The Fe nanoparticles are present on the tip of the carbon nanotube and nanotube grows by contraction–elongation mechanism. Among three different methodologies impregnation method was more effective to generate adequate active sites in the catalyst surface. The Ni promotion enhances the reducibility of Fe/Al₂O₃ oxides showing a higher catalytic activity. The catalyst is stable up to six hours on stream as observed in the activity results.     

Comprehensive studies on polymer electrolyte and dye-sensitized solar cell developed using castor oil-based polyurethane

Comprehensive characterization of new polymer electrolyte system prepared using polyurethane derived from castor oil polyol was undertaken. The castor oil polyol was synthesized via transesterification and reacted with 4,4′-diphenylmethane diisocyanate to form polyurethane. Polyurethane electrolyte films were prepared by addition of sodium iodide in different weight percentage with respect to the weight of the polymer. The electrolyte films were analyzed using Fourier transform infrared spectroscopy, dynamic mechanical analysis, electrochemical impedance spectroscopy, transference number measurement, and linear sweep voltammetry. Fourier transform infrared spectroscopy results confirmed the complexation between polymer and salt. Tan delta peak observed in the tan δ–temperature curve plotted using data obtained from dynamic mechanical analysis indicated that the glass transition temperature of polyurethane decreased with the addition of sodium iodide. The highest conductivity of 4.28 × 10^?7 S cm^?1 was achieved for the film with 30 wt% of sodium iodide. The performances of dye-sensitized solar cell using the electrolyte systems were analyzed in terms of short-circuit current density, open-circuit voltage, fill factor, and energy conversion efficiency. The polymer electrolyte with 30 wt% sodium iodide showed the best performance with energy conversion efficiency of 0.80%.     

Domino reactions between 3-(6-methylchromonyl)acrylonitrile and nucleophilic reagents

The chemical reactivity of electron deficient chromone–linked acrylonitrile [3-(6-methylchromonyl)acrylonitrile (1)] was studied towards some active methylene nitriles and active methylene ketones. Reaction of compound 1 with malononitrile, cyanoacetamide, ethyl cyanoacetate, malononitrile dimer and acetoacetanilide afforded 5-cyanomethylchromeno[4,3-b]pyridines 2–4 and 9. Compound 1 reacted with 1H-benzimidazol-2-ylacetonitrile producing pyrido[1,2-a]benzimidazole derivative 5. Benzonitrile derivatives 6–8 were efficiently synthesized from the reaction of compound 1 with acetylacetone, ethyl acetoacetate and diethylmalonate. In these reactions a diversity of products has been synthesized through a domino process, including Michael addition, retro-Michael with γ-pyrone ring opening followed by different types of recyclization (RORC). Structures of the new synthesized products were deduced on the basis of their analytical and spectral data, and the reaction mechanisms are discussed.     

Efficient synthesis of α-substituted-α-arylmethyl phosphonates using trichloroacetimidate CC coupling method

A simple convenient protocol for the synthesis of diethyl α,α-diaryl methylphosphonate derivatives 5a-f, 6b-f, 7a-f and 8a-f, diethyl α-alkenyl α-aryl methylphosphonates 9a-d and 10a-d and α-(oxoalkyl) α-aryl methylphosphonate 11a-d and 12a-d is described. Trichloroacetimidates 3a-d were treated with activated arenes, styrene, allyltrimethylsilane or silylenol ethers C-nucleophiles in the presence TMSOTf to afford the desired products in good yields and short reaction time.     

Spectrophotometric determination of trace-level bromate in drinking water after post-column reaction with pararosaniline based on multi-walled carbon nanotubes

A simple and sensitive spectrophotometric method is described for low level determinationof bromate in drinking water. This method is based on the reduction of bromate ions into bromine in the presence of pararosaniline by sodium metabisulphite to form a highly stable pink-red complex measured at 540 nm. Maximum colour formation was obtained at about 45 min. Multi-walled carbon nanotubes, a solid phase extraction sorbent, has been described for the removal of cationic interferences of major elements and heavy metals from water samples prior to conducting the assay. Bear’s law is obeyed in the range of 5–80 µg.L^?1 with limit of detection of 0.44 µg.L^?1 and correlation coefficient of 0.998 (n = 5). The mean relative standard deviation (RSD%) of the results within-day precision and accuracy were ≤1.2% which confirmed the reproducibility of the assay technique. The optimum assay conditions and their applicability to the determination of water samples are described. The method was successfully applied for the determination of bromate in water samples with satisfactory results and recommended to be applied in all desalination plant samples.     

GC-MS analysis of the bioactive phytoconstituents of various organic crude extracts from the seed kernels of Manilkara bidentata (balata) collected in Trinidad,W.I.

The present study reports the first phytochemical investigation of the seed kernels of Manilkara bidentata (Balata) harvested in Trinidad, W.I. Gas chromatography–mass spectrometry (GC-MS) analysis of the n-hexane, chloroform, ethyl acetate, ethanol and methanol extracts showed a total of 39 components. 2,6,10,14,18-pentamethyl-2,6,10,14,18-eicosapentaene (74.93%), 9-octadecenoic acid, (Z)- 2,3-dihydroxypropyl ester (79.98%), (Z)-ethyl oleate (92.75%), Z,E-2-methyl-3,13-octadecadien-1-ol (80.51%) and 5-(hydroxymethyl)-2-furancarboxyaldehyde (50.32%) were the major constituents identified in the n-hexane, chloroform, ethyl acetate, ethanol and methanol extracts, respectively. The extracts showed the presence of several bioactive components and provides reference data for further research of its active constituents.     

Dioclins A and B,new antioxidant flavonoids from Dioclea reflexa

Dioclins A (1) and B (2), the new flavonoids, have been isolated from the ethyl acetate soluble fraction of the roots of Dioclea reflexa along with 3,5-dihydroxy-4 methoxybenzoic acid (3), lupeol (4) and the rare dipeptide, auratiamide acetate (5). Their structures have been elucidated by spectroscopic techniques. The compounds 1 and 2 showed a significant antioxidant activity in DPPH radical scavenging assay.     

O‐Ethyl and O‐methyl N‐(2,3,4,6‐tetra‐O‐acetyl‐β‐d‐glucopyranosyl)thiocarbamate

In both the title structures, O‐ethyl N‐(2,3,4,6‐tetra‐O‐acetyl‐β‐d ‐gluco­pyran­osyl)­thio­carbam­ate, C₁₇H₂₅NO₁₀S, and O‐methyl N‐(2,3,4,6‐tetra‐O‐acetyl‐β‐d ‐gluco­pyran­osyl)­thiocar­bam­ate, C₁₆H₂₃NO₁₀S, the hexo­pyran­osyl ring adopts the ⁴C₁ conformation. All the ring substituents are in equatorial positions. The acetoxy­methyl group is in a gauche–gauche conformation. The S atom is in a synperi­planar conformation, while the C—N—C—O linkage is antiperiplanar. N—H?O intermolecular hydrogen bonds link the mol­ecules into infinite chains and these are connected by C—H?O interactions.     

Bis­(O,O′‐di‐p‐tolyldithiophosphato‐S,S′)(1,10‐phenanthroline‐N,N′)nickel(II)

The title coordination complex, [Ni(C₁₄H₁₄O₂PS₂)₂(C₁₂H₈N₂)] or [Ni(pMePh‐dtp)₂(phen)] (phen is 1,10‐phenanthroline; dtp is di­aryl­di­thio­phosphate), has a non‐crystallographic twofold axis of symmetry through the Ni atom and the phen moiety. Two O,O‐di‐p‐tolyl­di­thio­phosphate (dtp) ions act as bidentate ligands. The central metal atom is coordinated by four S atoms from two dtp groups and two N atoms from the phen ligand. The title compound displays distorted octahedral geometry around the central Ni atom.     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.