Spectrophotometric assay of retinol via charge-transfer complexes

Simple and sensitive spectrophotometric methods for the assay of retinol have been presented. The first method was based on the reaction of retinol with iodine to give a molecular charge-transfer complex, the retinol acting as n-donor and iodine as -electron acceptor. The second method depends on the formation of a highly coloured stable radical anion between retinol and 7,7,8,8-tetracyanoquinodimethane (TCNQ as a -electron acceptor. The molecular ratios of the reactants in the complexes have been established and the experimental conditions leading to maximum charge-transfer bands were also studied. Beer's law is obeyed over the retinol concentration range 2.5–26 µg/ml. The proposed procedures have been applied successfully to the analysis of drug formulation. The average recovery and average standard deviation was 99.99 ±1.13% with retinol-iodine and 100.001 ± 1.31% with retinol-TCNQ. A kinetic study was performed by heating retinol at 50°C for different periods of time, the result obtained by plotting log c against time indicates that thermal decomposition of retinol is of first order. The results obtained by both methods were in good agreement with those obtained by the official method. The developed procedures were found to be simple, accurate and precise and can be used for the determination of retinol in presence of its degradation products.     

Thermal properties of some compositions in the chalcogenide system Sb40Te60-xSex

The thermal diffusivities, specific heats and thermal conductivities of the binary compositions Sb₄₀Te₆₀ and Sb₄₀Se₆₀ and the ternary composition Sb₄₀Te₃₀Se₃₀ were measured in the range 320 to 500 K. It was found that the environmental temperature, the content of Se in the composition and the conditions of measurements are decisive factors greatly influencing both the values and the behaviour ot the thermal parameters, and the mechanisms of thermal transport. Although the tested compositions exhibit semiconducting behaviour, the free charge carrier component of the thermal conductivity was so small as to be negligible. Thus, it could be concluded that the observed thermal conductivity is attributable to both photon and phonon mechanisms.

---

Zusammenfassung Im Temperaturbereich 320–500 K wurde das Temperaturleitvermögen, die spezifische Wärme und die Wärmeleitfähigkeit der binären Kompositionen Sb₄₀Te₆₀ bzw. Sb₄₀Se₆₀ und der ternären Komposition Sb₄₀Te₃₀Se₃₀ untersucht. Man fand, daß die Umgebungstemperatur, der Se-Gehalt der Kompositionen und die Meßbedingungen entscheidende Faktoren sind, welche sowohl Wert als auch Verhalten der thermischen Parameter, weiterhin den Mechanismus des Wärmetransportes beeinflussen. Obwohl die untersuchten Kompositionen Halbleiterverhalten zeigten, war die freie Ladungsträgerkomponente der Wärmeleitfähigkeit so gering, daß sie vernachlässigt werden konnte. Somit konnte darauf geschlossen werden, daß die beobachtete Wärmeleitfähigkeit sowohl Photonen- als auch Phononenmechanismen zugeschrieben werden kann.

     

Super spline spaces of smoothnessr and degreed≥3r+2

The problem of computing the dimension of spaces of splines whose elements are piecewise polynomials of degreed withr continuous derivatives globally has attracted a great deal of attention recently. We contribute to this theory by obtaining dimension formulae for certain spaces of super splines, including the case where varying amounts of additional smoothness is enforced at each vertex. We also explicitly construct minimally supported bases for the spaces. The main tool is the Bernstein-Bézier method.Communicated by Klaus Höllig.     

Reaction Mechanisms of Strontium Ferrites Synthesis

The reactions between strontium and iron nitrates have been studied in an open atmosphere system using three different molar ratios, 1:1 (I), 1:2 (II) and 2:1 (III) at different temperatures as pointed out from the DTA data. The reaction mechanism was discussed based on the chemical composition characterized by means of thermal analysis, X‐ray diffraction patterns, infrared spectra and magnetic susceptibility. It was found that the reaction products depend on both temperature of reaction and the ratio between reactants. The reaction products were found to be composed of a variety of iron compounds that possess different valences: SrFeO_2.86, SrFeO_2.97, SrFe₂O₄, SrFe₁₂O₁₉, Sr₂Fe₂O₅ and Sr₇Fe₁₀O₂₂ in addition to some accessory reaction products namely α‐Fe₂O₃ and FeO(OH).     

Indirect atomic absorption and atomic emission spectrometric determination of antazoline,hydralazine and amiloride hydrochlorides and quinine sulphate

Ion-association complexes of antazoline HCl [I], hydralazine HCl [II], amiloride HCl [III] and quinine sulphate [IV] with [Co(SCN)₄]^2– and [Co(NO₂)₆]^3– were precipitated and the excess unreacted cobalt complex was determined. A new method using atomic emission and atomic absorption spectrometry for the determination of the above drugs in pure solutions and pharmaceutical preparations is given. The drugs can be determined in the ranges 0.3–3.0, 0.19–1.96, 0.3–3.0, and 0.78–7.82 mg/25 ml solutions of I, II, III, and IV, respectively, with mean relative standard deviations of 0.65–2.03 % and recovery values of 95.76–101.2% indicating high precision and accuracy.     

Gamma irradiation induced photochemical reactions in V-doped borate glasses

Glasses of the composition XNa₂O · 4Al₂O₃ (96-X) B₂O₃ (mole%) where X = 10, 20, 30 to which 0.03 g V₂O₅ per 100 g glass was added, were prepared by normal melting. Their absorption characteristics together with the corresponding V-free base glasses were determined before and after gamma irradiation. The characteristic spectra of the unirradiated glasses show absorption bands at 315, 470, 560–580, 610–650, 700–870, and 860–1000 nm, indicating the presence of vanadium ions in more than one oxidation state, viz, V⁵⁺, V⁴⁺, and V³⁺. Gamma irradation of V-containing glasses causes the formation of color centers in the glass matrices, with absorption bands at 330, 500, and 610 nm, and photoreduced [V³⁺] and [V²⁺] ions with absorption bands at 350–355 and 530–570 and 520 nm, respectively. Photoreduced [V⁴⁺] may also be formed, giving rise to absorptions at 690–700 and 750–800 nm. The induced vanadium ions are found to absorb at shorter wavelengths than the intrinsic ones. An explanation based on the difference in the field energy of the two states is given.     

Factorial design in the optimization of preconcentration procedure for lead determination by FAAS

The present paper proposes a preconcentration procedure for lead determination using flame atomic absorption spectrometry (FAAS). It is based on lead(II) ions extraction as brilliant cresyl blue (BCB) complex and its sorption onto Diaion HP-2MG, a methacrylic ester copolymer. The optimization step was carried out using factorial design and the variables studied were pH, shaking time and reagent concentration. In the established experimental conditions, lead can be determinate with a limit of detection of 3.7 μg L⁻¹ lead (N = 20) and a relative standard deviation of 7% for a lead concentration of 100 μg L⁻¹. The accuracy was confirmed by analysis of a certified reference material, the stream sediment furnished by National Research Centre for Certified Reference Materials (NRCCRM), China (GBW 07310). Effect of other ions in the procedure proposed was also studied. The method was applied for lead determination in real samples of water, tea, soil and dust. Tests of addition/recovery in the experiments for lead determination in water samples revealed that the proposed procedure could be applied satisfactorily for analysis of these samples.     

Synthesis and reactions of 3-thioxo[1,2,4]-triazino[3,2-b]quinazolin-10-ones

Thiation of [1,2,4]triazino[3,2-b]quinazoline-3,10-dione 1 proceeds selectively to give the 3-thioxo-analog 3 . The latter was converted to the corresponding 3-methylthio derivative 4 which was reacted with aniline and hydrazine to give the corresponding anilino- and hydrazino derivatives 5 and 7 . Compound 7 was converted to the hydrazones 8a,b and into the novel heterocyclic ring systems [1,2,4]triazolo[4′,3′:4,5][1,2,4]triazino-[3,2-b]quinazolin-7-ones 9, 10a,b and tetrazolo[1′,5′:4,5][1,2,4]triazino[3,2-b]quinazolin-7-one 11 .     

Frequency and voltage-dependent electrical and dielectric properties of Al/Co-doped PVA/p-Si structures at room temperature

In order to investigate of cobalt-doped interracial polyvinyl alcohol （PVA） layer and interface trap （Dit） effects, A1/p- Si Schottky barrier diodes （SBDs） are fabricated, and their electrical and dielectric properties are investigated at room temperature. The forward and reverse admittance measurements are carded out in the frequency and voltage ranges of 30 kHz-300 kHz and -5 V-6 V, respectively. C-V or er-V plots exhibit two distinct peaks corresponding to inversion and accumulation regions. The first peak is attributed to the existence of Dit, the other to the series resistance （Rs）, and interfacial layer. Both the real and imaginary parts of dielectric constant （er and err） and electric modulus （Mr and Mrr）, loss tangent （tan~）, and AC electrical conductivity （aac） are investigated, each as a function of frequency and applied bias voltage. Each of the M~ versus V and Mrr versus V plots shows a peak and the magnitude of peak increases with the increasing of frequency. Especially due to the Dit and interfacial PVA layer, both capacitance （C） and conductance （G/w） values are strongly affected, which consequently contributes to deviation from both the electrical and dielectric properties of A1/Co-doped PVA/p-Si （MPS） type SBD. In addition, the voltage-dependent profile of Dit is obtained from the low-high frequency capacitance （CLF-CHF） method.