One-pot,solvent-free and efficient synthesis of 2,4,6-triarylpyridines catalyzed by nano-titania-supported sulfonic acid as a novel heterogeneous nanocatalyst

Nano titania-supported sulfonic acid (n-TSA) has found to be a highly efficient, eco-friendly and recyclable heterogeneous nanocatalyst for the solvent-free synthesis of 2, 4, 6-triarylpyridines through one-pot three-component reaction of acetophenones, aryl aldehydes and ammonium acetate. This reported method illustrates several advantages such as environmental friendliness reaction conditions, simplicity, short reaction time, easy work up, reusability of catalyst and high yields of the products. One new compound is reported too. Furthermore, the catalyst could be recycled after a simple work-up, and reused at least six times without substantial reduction in its catalytic activity.     

纳米尺度NiLa2O4尖晶石催化NaBH4还原亚胺制仲胺

由溶胶-凝胶法制得的Ni-La化合物经热分解制备了纳米尺度NiLa2O4尖晶石，在750 oC焙烧后形成了结晶良好的尖晶石结构.采用差热分析、X射线衍射、透射电镜、扫描电镜和粒度分布分析等手段表征了该尖晶石的物理化学性质.结果表明，该纳米颗粒有规则的外形和确定的晶面，由平均粒径为40 nm的规整半球晶粒组成.精修的晶胞参数a=3.861205?和c=12.6793?.在NaBH4选择还原亚胺制相应仲胺的反应中，该新型纳米NiLa2O4尖晶石可用作高效多相催化剂，得到了较高的产物产率.所有反应可在室温和相对较短的时间内完成.在优化的反应条件下，均可得到带有不同芳基的，包括带有吸电子和供电子基团的仲胺.该催化剂回收简便，重复使用4次，其催化活性未见明显下降.     

A glassy carbon electrode with electrodeposited silver nanoparticles for aptamer based voltammetric determination of trinitrotoluene using riboflavin as a redox probe

An electrochemical nanoaptasensor is described that is based on the use of a glassy carbon electrode (GCE) modified with electrodeposited silver nanoparticles (AgNPs). An aptamer (Apt) against trinitrotoluene (TNT) was then immobilized on the AgNPs. The addition of TNT to the modified GCE leads to decrease in peak current (typically measured at a potential of ?0.45 V vs. Ag/AgCl) of riboflavin which acts as an electrochemical probe. Even small changes in the surface (as induced by binding of Apt to TNT) alter the interfacial properties. As a result, the LOD is lowered to 33 aM, and the dynamic range extends from 0.1 fM to 10 μM without sacrificing specificity.

Open image in new window

Graphical abstract Schematic presentation of a nanoaptasensor which is based on a glassy carbon electrode (GCE) modified with electrodeposited silver nanoparticles (AgNPs) and aptamer (Apt). It was applied to the detection of 2,4,6-trinitrotoluene (TNT) with the help of riboflavin (RF) as a redox probe.

     

Simultaneous voltammetric sensing of acetaminophen,epinephrine and melatonin using a carbon paste electrode modified with zinc ferrite nanoparticles

A highly selective electrochemical sensor was fabricated based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe₂O₄ NPs). The nanocomposite has attractive properties such as high surface-to-volume ratio and good electrocatalytic activity towards the drugs acetaminophen (AC), epinephrine (EP), and melatonin (MT), best at working voltages of 0.35, 0.09 and 0.55 V (vs. Ag/AgCl), respectively. The linear ranges (and detection limits) are 6.5–135 (0.4) μmol L^?1 for AC, 5–100 (0.7) μmol L^?1 for EP, and 6.5–145 (3) μmol L^?1 for MT.

Open image in new window

Graphical abstract A novel electrochemical sensor based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe₂O₄) for the simultaneous detection of the acetaminophen, epinephrine and melatonin was fabricated

     

Spectroscopic,thermal, and X-ray diffraction studies of tetrakis(thiourea) palladium chloride bis (5,7-dimethyl[1,2,4]triazolo[1,5-a]pyrimidine dihydrate

The crystal and molecular structure of the title compound, ·[Pd(S=C(NH₂)₂)₄]Cl₂·2dmtp·2H₂O. has been determined and refined to a finalR=0.034. The cation is centrosymmetric with the Pd atom existing in a square planar geometry with two disparate Pd–S bond distances of 2.3129(9) and 2.292(1)Å. Interatomic parameters are reported for the first non-coordinated dmtp molecule; these suggest the predominance of a particular canonical form in the solid state. The lattice is stabilized via a series H-bonding contacts involving the thiourea. Cl^– and dmtp species. Crystals of [Pd(S=C(NH₂)₂)₄]Cl₂ · 2dmtp · 2H₂O are monoclinic with space groupP2₁/c, and unit cell dimensionsa=15.129(1),b=8.512(1),c=12.663(1) Å, =104.05(1)°.     

Immobilized Vanadium Histidine and Tryptophan Schiff Base Complexes on Modified Magnetite Nanoparticles as Epoxidation Catalyst

In this study, magnetically recoverable vanadium complexs designated as VO(Sal-Tryp)/AmpSCMNPs and VO(Sal-His)/AmpSCMNPs were prepared through immobilization of Schiff bases of histidine or tryptophan with salicylaldehyde on the surface of modified silica coated iron oxide magnetite nanoparticles with (3-aminopropyl) trimethoxysilane as aminopropyl (Amp) spacer followed by complexation with VOSO₄. Characterization was carried out by chemical analysis, Fourier transform infrared spectroscopy, XRD, scanning electron microscopy and vibrating sample magnetometry techniques. VO(Sal-Tryp)/AmpSCMNPs and VO(Sal-His)/AmpSCMNP were found to catalyze the epoxidation of allyl alcohols and olefins with tert-butyl hydroperoxide with excellent conversions and selectivities. Investigation of the stability and reusability revealed the heterogeneity character of the catalyst with no desorption during the course of epoxidation reactions. High yields, clean reactions, easily catalyst separation and recyclability of the solid catalyst are some advantages of this method.     

In-situ mechanical properties identification of 3D particulate composites using the Virtual Fields Method

This paper presents an identification procedure based on the Virtual Fields Method (VFM) for identifying in situ mechanical properties of composite materials constitutive phases from 3D full-field measurements. The new procedure, called the Regularized Virtual Fields Method (RVFM), improves the accuracy of the VFM thanks to the imposition of mechanical constraints derived from an appropriate homogenization model. The developed algorithms were validated through virtual experiments on particulate composites. The robustness of both the VFM and the RVFM was assessed in the presence of noisy strain data for various microstructures. A study was also carried out to investigate the influence of the size of region of interests on the reliability of the identified parameters. Accordingly, the optimum size of region of interest was determined based on full-field measurement requirements and accuracy of the identified parameters. This study enables determining, a priori, the required magnification level of 3D images for composites of any mechanical and morphological characteristics.     

Molecular engineering of inorganic halide perovskites and HTMs for photovoltaic applications

A comprehensive study was performed for the design of ABX₃ perovskites, (A = Li, K, Na, B = Ge, Sn, Pb, X = F, Cl, Br, I) and organic hole transfer materials, HTMs (Fu-2a, Fu-2b, Fu-2c, and Dm-Q) for efficient perovskite solar cells (PSCs) through quantum chemistry calculations. Photovoltaic characteristics of the investigated perovskites are strongly affected by the halide anions. The results reveal that reducing the exciton binding energy of perovskites enhances the rate of the formation/dissociation of holes and electrons so F-based perovskites are superior from this viewpoint. Additionally, the electron and hole injection processes are more favorable in the case of the F-based perovskites in comparison with other studied perovskites. Moreover, spectroscopic properties of the perovskites demonstrate that KSnCl₃, NaSnCl₃, and F-based perovskites exhibit a greater ability of the light-harvesting and incident photon to current conversion efficiency. Ultimately, based on diverse analyses, F-based perovskites, KSnCl₃ and NaSnCl₃ are the preferred candidates to be applied in the PSCs due to an excellent incident photon to current conversion efficiency, light-harvesting efficiency, short circuit current, and solar cell final efficiency.