A Bistable Microelectromechanical System Actuated by Spin-Crossover Molecules

We report on a bistable MEMS device actuated by spin-crossover molecules. The device consists of a freestanding silicon microcantilever with an integrated piezoresistive detection system, which was coated with a 140 nm thick film of the [Fe(HB(tz)₃)₂] (tz=1,2,4-triazol-1-yl) molecular spin-crossover complex. Switching from the low-spin to the high-spin state of the ferrous ions at 338 K led to a reversible upward bending of the cantilever in agreement with the change in the lattice parameters of the complex. The strong mechanical coupling was also evidenced by the decrease of approximately 66 Hz in the resonance frequency in the high-spin state as well as by the drop in the quality factor around the spin transition.     

Evaluation of temperature gradients within combusting droplets in linear stream using two colors laser-induced fluorescence

The scope of this paper concerns the heating process of fuel droplets injected in a hot gaseous environment. The two colors laser-induced fluorescence technique allows measuring the temperature distribution within a droplet by scanning the droplet volume by a sufficiently small probe volume compared to the droplet volume itself. The temperature field is reconstructed using two approaches which have been compared. One is based on a geometrical optics model and the other is based on the 3D calculation of the internal excitation field within the droplet, using the generalized Lorenz-Mie theory. Experimental results have been obtained on a combusting monodisperse ethanol droplet stream (diameter around 200 m).     

Efficiency of random search procedures along the silicon cluster series: Si(n) (n=5-10, 15, and 20)

The efficiency of the simplest isomeric search procedure consisting in random generation of sets of atomic coordinates followed by density functional theory geometry optimization is tested on the silicon cluster series (Si(5-10, 15, 20)). Criteria such as yield, isomer distributions and recurrences are used to clearly establish the performance of the approach with respect to increasing cluster size. The elimination of unphysical candidate structures and the use of distinct box shapes and theoretical levels are also investigated. For the smaller Si(n) (n=5-10) clusters, the generation of random coordinates within a spherical box is found to offer a reasonable alternative to more complex algorithms by allowing straightforward identification of every known low-lying local minima. The simple stochastic search of larger clusters (i.e. Si(15) and Si(20)) is however complicated by the exponentially increasing number of both low- and high-lying minima leading to rather arbitrary and non-comprehensive results.     

Self-templating polythiophene derivatives: electronic decoupling of conjugated strands through staggered packing

Whereas molecular electronics needs well-controlled 3D geometries for decoupling or interconnecting individual molecules, conjugated polymers form disordered structures when deposited on a substrate. We show that this trend can be overcome in polythiophene derivatives designed so as to exploit weak sulfur-bromine interactions. A self-template effect follows, leading to staggered organizations of well-aligned electronically decoupled conjugated strands, as observed in situ by scanning tunneling microscopy and spectroscopy on graphite.     

Regioselective synthesis of novel substituted indazole-5,6-diamine derivatives

The synthesis of a series of novel indazole-5,6-diamine derivatives is described. This indazole ring system was incorporated in an octahydropyrrolo[3,4-b]phenazine scaffold and was diversely and regioselectively substituted on the nitrogen atoms at the 5- and 10-positions. Thus, the nitrogen atom at the 5-position was found to be more reactive toward electrophiles than the one at the 10-position. This difference of reactivity could be attributed to the electronic effect of the pyrazole moiety. Moreover, an unexpected tetrahydropyran protecting group migration was observed from the N-1 atom to the C-11 position of the octahydropyrrolo[3,4-b]phenazine scaffold.     

Ferromagnetic versus antiferromagnetic exchange interactions in tetrathiafulvalene-based 3d/4f heterobimetallic complexes

(TTF-salphen)M compounds (TTF-salphen(2-)=4,5-bis(propylthio)tetrathiafulvalene-N,N'-phenylenebis(salicylideneimine) dianion; M=Cu(II) and Ni(II)) have been treated with Ln(hfac)(3)·2H(2)O precursors (hfac(-)=1,1,1,5,5,5-hexafluoroacetylacetonate anion; Ln=Gd(III), Tb(III), and Dy(III)) to elaborate unprecedented 3d/4f TTF-based heterobimetallic complexes of formula [(TTF-salphen)MLn(hfac)(3)]. All the structures of these compounds have been resolved by X-ray diffraction on single crystals. The structures of these complexes are formed by a TTF-salphen(2-) ligand coordinated to the 3d metal ions in the inert tetradentate N(2)O(2) site. The Ln(hfac)(3) fragment is coordinated to the (TTF-salphen)M one through the two phenolate bridges. Even if the complexes are similar in both Cu(II) and Ni(II) families, the crystal packing is different. In the first case, dimers of TTF-salphen(2-) donors constitute the organic network. In the other case, a reminiscent organic network is observed with S···S contacts. The photophysical properties of [(TTF-salphen)CuDy(hfac)(3)] (3) in chloroform solution highlight the redshift of the TTF→salphen charge transfer (400 cm(-1)) relative to the analogue excitations in (TTF-salphen)Cu, which attest to the stability of these structures in solution. Static magnetic measurements have allowed us to quantify the ferromagnetic interactions (J=+1.29 cm(-1)) between Cu(II) and Gd(III) in the [(TTF-salphen)CuGd(hfac)(3)] complex. Finally, an empirical method that consists of the comparisons of the magnetic properties of [(TTF-salphen)CuTb(hfac)(3)] with [(TTF-salphen)NiTb(hfac)(3)] and [(TTF-salphen)CuDy(hfac)(3)] with [(TTF-salphen)NiDy(hfac)(3)] has established that ferromagnetic interactions take place between Cu(II) and Tb(III) ions, whereas unusual antiferromagnetic interactions have been identified between Cu(II) and Dy(III) ions.     

How linker's modification controls swelling properties of highly flexible iron(III) dicarboxylates MIL-88

A series of organically modified iron(III) terephthalate MIL-88B and iron(III) 4,4'-biphenyl dicarboxylate MIL-88D flexible solids have been synthesized and characterized through a combination of X-ray diffraction, IR spectroscopy, and thermal analysis (MIL stands for Material from Institut Lavoisier). The swelling amplitude of the highly flexible MOFs tuned by introducing functional groups onto the phenyl rings shows a clear dependence on the steric hindrance and on the number of groups per aromatic ring. For instance, while the introduction of four methyl groups per spacer in dried MIL-88B results in a large permanent porosity, introducing two or four methyl groups in MIL-88D allows an easier pore opening in the presence of liquids without drastically decreasing the swelling magnitude. The influence of the degree of saturation of the metal center and the nature of the solvent on the swelling is also discussed. Finally, a computationally assisted structure determination has led to a proposal of plausible structures for the closed (dried) and open forms of modified MIL-88B and MIL-88D and to evaluation of their framework energies subject to the nature of the functional groups.     

Shell particles, trials, tribulations and triumphs

The concept of pellicular particles was imagined by Horváth and Lipsky fifty years ago. They were initially intended for the analysis of macromolecules. Later, shell particles were prepared. The rational behind this concept was to improve column efficiency by shortening the pathways that analyte molecules must travel and, so doing, to improve their mass transfer kinetics. Several brands of superficially porous particles were developed and became popular in the 1970s. However, the major improvements in the manufacturing of high-quality, fully porous particles, that took place in the same time, particularly by making them finer and more homogeneous, hampered the success of shell particles, which eventually disappeared. Recently, the pressing needs to improve analytical throughputs forced particle manufacturers to find a better compromise between the demands for higher column efficiency that require short diffusion paths of analyte molecules in columns and the need for columns that can be operated with the conventional instruments for liquid chromatography, which operate with moderate column back-pressures. This lead to the apparition of a new generation of columns packed with shell particles, which bring chromatographic columns to a level of efficiency undreamed of a few years ago. This evolution is reviewed, the reason that motivated it, and the consequences of their success are discussed.     

Kinetic investigation of narrow-bore columns packed with prototype sub-2 μm superficially porous particles with various shell thickness

The recent successful breakthrough of sub-3 μm shell particles in HPLC has triggered considerable research efforts toward the design of new brands of core-shell particles. We investigated the mass transfer mechanism of a few analytes in narrow-bore columns packed with prototype 1.7 μm shell particles, made of 1.0, 1.2, and 1.4 μm solid nonporous cores surrounded by porous shells 350, 250, and 150 nm thick, respectively. Three probe solutes, uracil, naphthalene, and insulin, were chosen to assess the kinetic performance of these columns. Inverse size exclusion chromatography, peak parking experiments, and the numerical integration of the experimental peak profiles were carried out in order to measure the external, internal, and total column porosities, the true bulk diffusion coefficients of these analytes, the height equivalent to a theoretical plate, the longitudinal diffusion term, and the trans-particle mass transfer resistance term. The residual eddy diffusion term was measured by difference. The results show the existence of important trans-column velocity biases (7%) possibly due to the presence of particle multiplets in the slurry mixture used during the packing process. Our results illustrates some of the difficulties encountered by scientists preparing and packing shell particles into narrow-bore columns.     

Accurate measurements of peak variances: importance of this accuracy in the determination of the true corrected plate heights of chromatographic columns

The true efficiency of a column is derived from the differences between the variances of the peak profiles of the same compound recorded in the presence and the absence of the chromatographic column. These variances are usually derived using one of three methods: (1) the retention time of the peak apex and its half-height width; (2) the moments of the best fit between the experimental data and a hybrid response function, e.g., an exponentially convoluted Gaussian; or (3) the exact moments of the experimental band profiles. Comparisons of the results of these methods show that the first method is always inaccurate because all the band profiles recorded are strongly tailing. The peak fit method is accurate only for 4.6mm I.D. columns operated with instruments having low extra-column volume but fails for short narrow-bore columns due to the severe tailing of peaks passing through the complex channels of the extra-column volumes and to the inaccuracies in the fit of experimental data to the selected function. Although far better, the moment method may be inaccurate when the zero dead volume union used to measure the extra-column peak variances has a higher permeability than the column, causing the upstream part of the instrument to operate under comparatively low pressures.