1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Exaltone® (=Cyclopentadecanone) from Isomuscone® (=Cyclohexadecanone), a One‐C‐Atom Ring‐Contraction Methodology via a Stereospecific Favorskii Rearrangement: Regioselective Application to (−)‐(R)‐Muscone

Treatment of cyclohexadecanone ( 1g ; with I₂ (2.2 mol‐euqiv.) and KOH in MeOH) furnished the unsaturated (Z)‐ester 2g in 83% yield, via a stereospecific Favorskii rearrangement (Scheme 1). Further treatment with 3‐chloroperbenzoic acid (m‐CPBA) afforded the unreported epoxy ester 3g (88% yield), which was cleaved in 33% yield to Exaltone^® (=cyclopentadecanone; 1f ) with NaOH in MeOH/H₂O and then HCl at 65°. This methodology was similarly extended to higher (C₁₇) and lower (C₁₅ to C₁₁) cyclic ketone analogues, as well as regioselectively to (?)‐(R)‐muscone ( 5c ) and homomuscone ( 5f ) (Scheme 2). Olfactive properties of the corresponding macrocyclic 1‐oxaspiro[2,n]alkanes and ‐alkenes 4 and 8 , resulting from a Corey? Chaykovsky oxiranylation, are also presented.     

Effect of permodified β‐cyclodextrin on the photophysical properties of poly[2,7‐(9,9‐dioctylfluorene)‐alt‐(5,5′‐bithiophene)] main chain polyrotaxanes

The photophysical properties of two polyrotaxanes ( PFBTh?PSβCD and PFBTh?PMeβCD ) composed of fluorene and bithiophene encapsulated into permodified β‐cyclodextrin cavities have been investigated and compared with those of the reference PFBTh . Rotaxane formation results in improvements of the thermal stability, solubility in common organic solvents, as well as better film forming ability combined with a high transparency. As expected PFBTh and its encapsulated forms absorb at wavelengths beyond 510 nm, and time‐resolved photoluminescence (PL) in solution shows a well‐define vibronic structures with a predominance of the 0‐0 transitions and an energy difference of 0.16 eV. The fluorescence lifetimes follow a monoexponential decay with a value τ = 630 ± 30 ps. Atomic force microscopy, AFM, indicated a tendency of polyrotaxanes to organize into fibers. The advancing contact angles indicated higher surface hydrophobicity and lower surface free‐energy values for polyrotaxanes compared with their unthreaded analogues. The device based on PFBTh?PSβCD: PCBM in a 1/1 w/w ratio under simulated AM 1.5G illumination at 100 mW cm^?2 exhibited improved photovoltaic parameters of cells, resulted in high V_oc (0.68 V), J_sc (1.65 mA cm^?2), FF (31.6%), and PCE (0.35) values, compared with PFBTh or PFBTh?PMeβCD , respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 460–471     

Synthesis of New N‐(5‐Oxo‐2,5‐dihydro)pyrrol‐3‐yl Glycines and N‐(5‐Oxo‐2,5‐dihydro)pyrrol‐3‐yl Glycines Esters

Following our efforts towards the synthesis of new potential inhibitors of Xanthine Dehydrogenase (XDH), we describe here a general method for the preparation of N-(5-oxo-2,5-dihydro)pyrrol-3-yl glycines and N-(5-oxo-2,5-dihydro)pyrrol-3-yl glycine esters from glycine ethyl ester hydrochloride and various 4-hydroxy-5-oxo-2,5-dihydro-1H-pyrrole-3-carboxylic acid esters and carbonitriles.     

Characterization and kinetic performance of 2.1 × 100 mm production columns packed with new 1.6 μm superficially porous particles

The overall kinetic performance of three production columns (2.1 mm × 100 mm format) packed with 1.6 μm superficially porous CORTECS‐C₁₈+ particles was assessed on a low‐dispersive I‐class ACQUITY instrument. The values of their minimum intrinsic reduced plate heights (h_min = 1.42, 1.57, and 1.75) were measured at room temperature (295 K) for a small molecule (naphthalene) with an acetonitrile/water eluent mixture (75:25, v/v). These narrow‐bore columns provide an average intrinsic efficiency of 395 000 plates per meter. The gradient separation of 14 small molecules shows that these columns have a peak capacity about 25% larger than similar ones packed with fully porous BEH‐C₁₈ particles (1.7 μm) or shorter (50 mm) columns packed with smaller core–shell particles (1.3 μm) operated under very high pressure (>1000 bar) for steep gradient elution (analysis time 80 s). In contrast, because their permeabilities are lower than those of columns packed with larger core–shell particles, their peak capacities are 25% smaller than those of narrow‐bore columns packed with standard 2.7 μm core–shell particles.     

Polymethylmethacrylate derivatives Eudragit E100 and L100: Interactions and complexation with surfactants

Precipitation or coprecipitation of polyelectrolytes has been largely investigated. However, the precipitation of polyelectrolytes via addition of charged and non‐charged surfactants has not been systematically studied and reported. Consequently, the aim of this work is to investigate the effect of different surfactants (anionic, cationic, non‐charged and zwitterionic) on the precipitation of cationic and anionic polymethylmethacrylate polymers (Eudragit). The surfactants effect has been investigated as a function of their concentration. Special attention has been dedicated to the CMC range and to the colloidal characterization of the formed dispersions. Moreover, the effect of salt (NaCl) and pH was also addressed. It is pointed out that non‐ionic and zwitterionic surfactants do not interact with charged Eudragit E100 and L100. For oppositely charged Eudragit E100/SDS and Eudragit L100/CTAB, precipitation occurs, and the obtained dispersions have been characterized in terms of particle size distribution and zeta potential. It was established that the binding of SDS molecules to Eudragit E100 polymer chains is made through the negative charges of the surfactant heads under the CMC value whereas binding of CTAB to Eudragit L100 chains is made at a CTAB concentration 5 times above its CMC. For Eudragit E100/SDS system, a more acidic medium induces aggregation. A same result was observed for the Eudragit L100/CTAB at a more basic pH. Moreover, it was observed that increasing salt concentration (higher than 100 mM) led to aggregation as generally observed for polycations/anionic surfactant systems.     

New Quinoxaline Derivatives as Dual Pim-1/2 Kinase Inhibitors: Design,Synthesis and Biological Evaluation

Proviral integration site for Moloney murine leukemia virus (Pim)-1/2 kinase overexpression has been identified in a variety of hematologic (e.g., multiple myeloma or acute myeloid leukemia (AML)) and solid (e.g., colorectal carcinoma) tumors, playing a key role in cancer progression, metastasis, and drug resistance, and is linked to poor prognosis. These kinases are thus considered interesting targets in oncology. We report herein the design, synthesis, structure–activity relationships (SAR) and in vitro evaluations of new quinoxaline derivatives, acting as dual Pim1/2 inhibitors. Two lead compounds (5c and 5e) were then identified, as potent submicromolar Pim-1 and Pim-2 inhibitors. These molecules were also able to inhibit the growth of the two human cell lines, MV4-11 (AML) and HCT-116 (colorectal carcinoma), expressing high endogenous levels of Pim-1/2 kinases.     

Boson Mott insulators at finite temperatures

We discuss the finite temperature properties of ultracold bosons in optical lattices in the presence of an additional, smoothly varying potential, as in current experiments. Three regimes emerge in the phase diagram: a low-temperature Mott regime similar to the zero-temperature quantum phase, an intermediate regime where Mott insulator features persist, but where superfluidity is absent, and a thermal regime where features of the Mott insulator state have disappeared. We obtain the thermodynamic functions of the Mott phase in the latter cases. The results are used to estimate the temperatures achieved by adiabatic loading in current experiments. We point out the crucial role of the trapping potential in determining the final temperature, and suggest a scheme for further cooling by adiabatic decompression.     

Unraveling the Crystal Structure of Lanthanide–Murexide Complexes: Use of an Ancient Complexometry Indicator as a Near‐Infrared‐Emitting Single‐Ion Magnet

Herein, we provide some structural evidence of the complexation color‐change of murexide solutions in presence of lanthanide, which has been used for decades in complexometric studies. For Ln=Sm to Lu and Y, the compounds crystallize as monomeric [Ln(Murex)₃] ? 11 H₂O with an N3O6 tricapped square‐antiprism environment, which are stable up to 250 °C. Single‐ion magnet (SIM) behavior is then observed on the Yb^III derivative in an original nine‐coordinated environment. In‐field slow relaxation (Δ=(15.6±1) K; τ₀=2.73×10^?6 s) is observed with a very narrow distribution of the relaxation time (α_max=0.09). Magnetic and photophysical properties can be correlated. On one hand the analysis of NIR emission spectrum permits to have access to crystal field parameters and to compare them with those extracted from dc measurements. On the other hand, magnetic measurements permit to identify the nature of the M _J states involved in the ²F_5/2→²F_7/2 luminescence spectrum. The gap between the low‐lying states is in agreement with the energy barrier obtained from magnetic slow‐relaxation measurement.