Films from soft‐core/hard‐shell hydrophobic latexes: Structure and thermomechanical properties

Structured latexes provide a promising route to hard coatings without the use of coalescing aids. We studied the thermomechanical properties of films from structured soft‐core/hard‐shell hydrophobic latexes. We found that the mechanical properties of these films were closely related to their very particular organization. When the rigid phase was continuous, whatever its volume fraction, the films exhibited a high elastic modulus. An analysis of the viscoelastic properties of the films provided a good method for obtaining information about the interphase between the hard shell and soft core of the latex particles. By varying the film structure through annealing or the particle composition (core/shell ratio, core crosslinking, etc.), we were able to tune the mechanical properties of the films. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2989–3000, 2000     

On the Synthesis,Characterization and Reactivity of N‐Heteroaryl–Boryl Radicals,a New Radical Class Based on Five‐Membered Ring Ligands

The synthesis and physical characterization of a new class of N‐heterocycle–boryl radicals is presented, based on five membered ring ligands with a N(sp²) complexation site. These pyrazole–boranes and pyrazaboles exhibit a low bond dissociation energy (BDE; B?H) and accordingly excellent hydrogen transfer properties. Most importantly, a high modulation of the BDE(B?H) by the fine tuning of the N‐heterocyclic ligand was obtained in this series and could be correlated with the spin density on the boron atom of the corresponding radical. The reactivity of the latter for small molecule chemistry has been studied through the determination of several reaction rate constants corresponding to addition to alkenes and alkynes, addition to O₂, oxidation by iodonium salts and halogen abstraction from alkyl halides. Two selected applications of N‐heterocycle–boryl radicals are also proposed herein, for radical polymerization and for radical dehalogenation reactions.     

Unraveling the Crystal Structure of Lanthanide–Murexide Complexes: Use of an Ancient Complexometry Indicator as a Near‐Infrared‐Emitting Single‐Ion Magnet

Herein, we provide some structural evidence of the complexation color‐change of murexide solutions in presence of lanthanide, which has been used for decades in complexometric studies. For Ln=Sm to Lu and Y, the compounds crystallize as monomeric [Ln(Murex)₃] ? 11 H₂O with an N3O6 tricapped square‐antiprism environment, which are stable up to 250 °C. Single‐ion magnet (SIM) behavior is then observed on the Yb^III derivative in an original nine‐coordinated environment. In‐field slow relaxation (Δ=(15.6±1) K; τ₀=2.73×10^?6 s) is observed with a very narrow distribution of the relaxation time (α_max=0.09). Magnetic and photophysical properties can be correlated. On one hand the analysis of NIR emission spectrum permits to have access to crystal field parameters and to compare them with those extracted from dc measurements. On the other hand, magnetic measurements permit to identify the nature of the M _J states involved in the ²F_5/2→²F_7/2 luminescence spectrum. The gap between the low‐lying states is in agreement with the energy barrier obtained from magnetic slow‐relaxation measurement.     

An Efficient RuII–RhIII–RuII Polypyridyl Photocatalyst for Visible‐Light‐Driven Hydrogen Production in Aqueous Solution

The development of multicomponent molecular systems for the photocatalytic reduction of water to hydrogen has experienced considerable growth since the end of the 1970s. Recently, with the aim of improving the efficiency of the catalysis, single‐component photocatalysts have been developed in which the photosensitizer is chemically coupled to the hydrogen‐evolving catalyst in the same molecule through a bridging ligand. Until now, none of these photocatalysts has operated efficiently in pure aqueous solution: a highly desirable medium for energy‐conversion applications. Herein, we introduce a new ruthenium–rhodium polypyridyl complex as the first efficient homogeneous photocatalyst for H₂ production in water with turnover numbers of several hundred. This study also demonstrates unambiguously that the catalytic performance of such systems linked through a nonconjugated bridge is significantly improved as compared to that of a mixture of the separate components.     

Effect of permodified β‐cyclodextrin on the photophysical properties of poly[2,7‐(9,9‐dioctylfluorene)‐alt‐(5,5′‐bithiophene)] main chain polyrotaxanes

The photophysical properties of two polyrotaxanes ( PFBTh?PSβCD and PFBTh?PMeβCD ) composed of fluorene and bithiophene encapsulated into permodified β‐cyclodextrin cavities have been investigated and compared with those of the reference PFBTh . Rotaxane formation results in improvements of the thermal stability, solubility in common organic solvents, as well as better film forming ability combined with a high transparency. As expected PFBTh and its encapsulated forms absorb at wavelengths beyond 510 nm, and time‐resolved photoluminescence (PL) in solution shows a well‐define vibronic structures with a predominance of the 0‐0 transitions and an energy difference of 0.16 eV. The fluorescence lifetimes follow a monoexponential decay with a value τ = 630 ± 30 ps. Atomic force microscopy, AFM, indicated a tendency of polyrotaxanes to organize into fibers. The advancing contact angles indicated higher surface hydrophobicity and lower surface free‐energy values for polyrotaxanes compared with their unthreaded analogues. The device based on PFBTh?PSβCD: PCBM in a 1/1 w/w ratio under simulated AM 1.5G illumination at 100 mW cm^?2 exhibited improved photovoltaic parameters of cells, resulted in high V_oc (0.68 V), J_sc (1.65 mA cm^?2), FF (31.6%), and PCE (0.35) values, compared with PFBTh or PFBTh?PMeβCD , respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 460–471     

Characterization and kinetic performance of 2.1 × 100 mm production columns packed with new 1.6 μm superficially porous particles

The overall kinetic performance of three production columns (2.1 mm × 100 mm format) packed with 1.6 μm superficially porous CORTECS‐C₁₈+ particles was assessed on a low‐dispersive I‐class ACQUITY instrument. The values of their minimum intrinsic reduced plate heights (h_min = 1.42, 1.57, and 1.75) were measured at room temperature (295 K) for a small molecule (naphthalene) with an acetonitrile/water eluent mixture (75:25, v/v). These narrow‐bore columns provide an average intrinsic efficiency of 395 000 plates per meter. The gradient separation of 14 small molecules shows that these columns have a peak capacity about 25% larger than similar ones packed with fully porous BEH‐C₁₈ particles (1.7 μm) or shorter (50 mm) columns packed with smaller core–shell particles (1.3 μm) operated under very high pressure (>1000 bar) for steep gradient elution (analysis time 80 s). In contrast, because their permeabilities are lower than those of columns packed with larger core–shell particles, their peak capacities are 25% smaller than those of narrow‐bore columns packed with standard 2.7 μm core–shell particles.     

Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866     

Click approaches in sol–gel chemistry

The combination of the copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction with sol–gel processing enables the versatile preparation of sol–gel materials under different shapes with targeted functionalities through a diversity-oriented approach. In this account, the development of the CuAAC reaction under anhydrous conditions for the synthesis of sol–gel precursors and for the assembling of magnetic nanoparticles on self-assembled monolayers is related, as well as the use of the classical CuAAC methodologies for the functionalization of mesoporous silica nanoparticles and microdots arrays. Coupling CuAAC and Sol–Gel will result in simplified preparations of multifunctional materials with controlled morphologies.