Use of Spectroscopic and Imaging Techniques to Evaluate Pretreated Sugarcane Bagasse as a Substrate for Cellulase Production Under Solid-State Fermentation

The enzymatic cocktail of cellulases is one of the most costly inputs affecting the economic viability of the biochemical route for biomass conversion into biofuels and other chemicals. Here, the influence of liquid hot water, dilute acid, alkali, and combined acid/alkali pretreatments on sugarcane bagasse (SCB) used for cellulase production was investigated by means of spectroscopic and imaging techniques. Chemical composition and structural characteristics, such as crystallinity (determined by X-ray diffraction), functional groups (Fourier transform infrared spectroscopy), and microstructure (scanning electron microscopy), were used to correlate SCB pretreatments with enzymatic biosynthesis by a strain of the filamentous fungus Aspergillus niger under solid-state fermentation. The combined acid/alkali pretreatment resulted in a SCB with higher cellulose content (86.7 %). However, the high crystallinity (74 %) of the resulting biomass was detrimental to microbial uptake and enzyme production. SCB pretreated with liquid hot water yielded the highest filter paper cellulase (FPase), carboxymethyl cellulase (CMCase), and xylanase activities (0.4, 14.9, and 26.1 U g^?1, respectively). The results showed that a suitable pretreatment for SCB to be used as a substrate for cellulase production should avoid severe conditions in order to preserve amorphous cellulose and to enhance the physical properties that assist microbial access.     

Unprecedented gas-phase chiroselective logic gates

The gas-phase encounters between 2-aminobutane and proton-bound chiral resorcin[4]arene/nucleoside complexes behave in the gas phase as supramolecular "chiroselective logic gates" by releasing the nucleoside depending on the resorcin[4]arene and the 2-aminobutane configurations.     

Antimicrobial and cytotoxic effects of Mexican medicinal plants

The antimicrobial effects of the Mexican medicinal plants Guazuma ulmifolia, Justicia spicigera, Opuntia joconostle, O. leucotricha, Parkinsonia aculeata, Phoradendron longifolium, P. serotinum, Psittacanthus calyculatus, Tecoma stans and Teucrium cubense were tested against several human multi-drug resistant pathogens, including three Gram (+) and five Gram (-) bacterial species and three fungal species using the disk-diffusion assay. The cytotoxicity of plant extracts on human cancer cell lines and human normal non-cancerous cells was also evaluated using the MTT assay. Phoradendron longifolium, Teucrium cubense, Opuntia joconostle, Tecoma stans and Guazuma ulmifolia showed potent antimicrobial effects against at least one multidrug-resistant microorganism (inhibition zone > 15 mm). Only Justicia spicigera and Phoradendron serotinum extracts exerted active cytotoxic effects on human breast cancer cells (IC50 < or = 30 microg/mL). The results showed that Guazuma ulmifolia produced potent antimicrobial effects against Candida albicans and Acinetobacter lwoffii, whereas Justicia spicigera and Phoradendron serotinum exerted the highest toxic effects on MCF-7 and HeLa, respectively, which are human cancer cell lines. These three plant species may be important sources of antimicrobial and cytotoxic agents.     

Differences in brain regions of three mice strains identified by label-free micro-Raman

The analysis of different central nervous system regions is interesting and necessary as each one is involved in specific physiological processes and pathologies. On that matter, differences in the chemical composition between the same brain regions in different mice strains have been reported. In this sense, the development of a simple method for the identification of these regions depending on their chemical composition becomes relevant. Raman microspectroscopy, a non-destructive analytical chemical approach for biological samples, is a widely used method for qualitative, quantitative, and structural analysis in biochemical research. Ten brain structures in three different mice strains (Triple transgenic for Alzheimer Disease, 3xTgAD; Cluster 57 black 6, C57BL/6; and the Swiss strain, CD1) were analyzed, and variations among samples from several brain regions were found. Particularly, the pattern of signals from the hippocampus, the prefrontal and temporal cortices, the basal forebrain, the striatum, the cerebellum, and the hypothalamus was discernable. Interestingly, notable signals regarding non-peptide small neurotransmitters were observed, including those related to acetylcholine. These bands were present in the Raman spectra of the basal forebrain and prefrontal cortex in the three mice strains, consistent with the relative abundance of this neurotransmitter in those regions. However, signals with lower intensities appeared in the basal forebrain of C57BL/6 in comparison with the same tissue of the other two strains. In addition, the Raman intensity of bands assigned to catecholamines in the striatum was lower in the 3xTgAD than those from both CD1 and C57BL/6 mice strains. This approach, as well as the reported differences, has potential application for designing analysis on specific murine models of brain diseases.     

Crystallization study of molybdate phosphate glasses by thermal analysis

Vitreous samples were prepared in the binary system NaPO₃–MoO₃ and their characteristic temperatures were determined by Differential Scanning Calorimetry. Glasses with high amounts of MoO₃ (>45 mol%) exhibit an intense crystallization peak and the composition 50 NaPO₃–50 MoO₃ was chosen for the crystallization study. Two different methods based on thermal analyzes were used to determine the mechanism of crystallization in these molybdenum–phosphate glasses. In the first procedure, thermal analyses by DTA were performed on samples with different grain sizes and the crystallization tendency deduced in function of superficial area. The second method used the classical non-isothermal crystallization study: DSC measurements were performed under several heating rates to access activation energy for crystallization and Avrami parameter n. Critical cooling rate was calculated and compared with experimental data obtained from DTA analysis upon cooling.     

Nonlinear and nonsmooth dynamics in a DC-DC Buck converter: Two experimental set-ups

It is well known that many nonlinear phenomena such as bifurcations and chaotic behavior occur in DC–DC converters mainly due to the switching action among all the different topologies of the circuit. Such behavior has been described with detail numerically, and also mathematical reasoning has been provided. In this paper we focuss on the experimental side of a DC–DC Buck converter controlled with two different strategies: classical Pulse Width Modulation (PWM) with a ramp and a more recently described Zero Average Dynamics (ZAD). We show some nonsmooth events and we explain with detail the experimental set-ups. In one of them, we use a FPGA card to obtain on-line results. In the other we use Virtual Instrumentation to generate an experimental two-dimensional bifurcation diagram, which will be compared to the numerical data. After the data acquisition of the system state variables some elaborated post-processing must be made. This is done through LabView. Although the main application of these results is centered in avoiding non-periodic or high-amplitude periodic behavior, they can also be applied to reducing the generated electro-magnetic interference and to the information transmission.Partially funded by SICONOS.     

Mechanical and optical properties of ultralarge flakes of a metal–organic framework with molecular thickness

The isolation of 2D-materials is already a success for graphene, graphene oxide, boron nitride and a few clays or metal chalcogenides, however despite the fact that some of them show very interesting physical properties, they lack useful functionalities. Metal–Organic Frameworks (MOFs) are multifunctional materials showing a wide range of physical and chemical properties that can be structurally designed by suitable selection of their building-blocks. This strategy may allow the production of layers with a variety of useful electronic and molecular recognition functionalities. Herein we isolate 2D-MOF flakes with areas of hundreds of square microns and an excellent control of the molecular thickness (from single up to ca. 50 layers). The samples exhibit such good photoluminescence and mechanical properties as to allow free-standing characterization of few layers’ flakes.     

Isolation and structural analysis of the cyclic fatty acid monomers formed from eicosapentaenoic and docosahexaenoic acids during fish oil deodorization

Long-chain polyunsaturated fatty acids (LC-PUFAs) present in fish oils are thermolabile molecules. Among the degradation reactions encountered, thermal cyclization occurs during refining or other heat treatments. Numerous studies have been carried out in the past to quantify and determine the structures of cyclic fatty acid monomers (CFAMs) formed from oleic, linoleic and linolenic acids in heated vegetable oils. Recently, much attention have been given to LC-PUFAs due to their potential health benefits. However, data on quantification of CFAMs formed from these fatty acids, such as eicosapentaenoic acid (EPA, cis-5, cis-8, cis-11, cis-14, cis-17 20:5) and docosahexaenoic acid (DHA, cis-4, cis-7, cis-10, cis-13, cis-16, cis-19 22:6), the two main LC-PUFAs in fish oils, are scarce. In the present study, structural analyses of CFAMs formed from EPA and DHA during the deodorization of fish oil are presented. Fish oil sample was deodorized at 250 degrees C for 3 h under a pressure of 1.5 mbar in a laboratory deodorizer. The CFAMs formed during heat treatment of fish oil were isolated by a combination of saponification, esterification, urea fractionations and column chromatography. Structural analyses of C20- and C22-CFAMs were achieved by gas-chromatography electronic-ionization mass-spectrometry (GC-EI-MS) of their 4,4-dimethyloxazoline (DMOX) derivatives. We identified seven out of 13 possible structures of hydrogenated CFAMs formed from EPA, and nine out of 16 possible structures of CFAM formed from DHA. Major CFAMs from both EPA and DHA were cyclohexyl isomers. All possible cyclohexyl isomers were found but only nine out of 18 of the cyclopentyl isomers were present in concentration sufficient for identification. Chemical mechanisms involved in the formation of polyunsaturated LC-PUFAs have been investigated. The results have shown that general principle involved in the cyclization of LC-PUFAs is same as that for the thermal cyclization of oleic, linoleic and alpha-linolenic acids.     

Quantification of eicosapentaenoic and docosahexaenoic acid geometrical isomers formed during fish oil deodorization by gas-liquid chromatography

Long-chain polyunsaturated fatty acids (LC-PUFAs) of the n-3 series and especially eicosapentaenoic and docosahexaenoic acids (EPA and DHA, respectively) have important biological properties. The main dietary sources of LC-PUFAs are fish and fish oil. Geometrical isomerization is one of the main reactions happening during the thermal treatment of polyunsaturated fatty acids. Refined fish oils are used to supplement food products in LC-PUFAs and the quality of these nutritional ingredients have to be controlled. In the present study, a suitable method for the quantification of EPA and DHA geometrical isomers in fish oils by gas-liquid chromatography (GC) is presented. A highly polar capillary column (CP-Sil 88, 100 m) operating under optimal conditions was used. Method selectivity was studied by GC-mass spectrometry. The performance characteristics of the quantification method were studied using samples of fish oil deodorized at 220 degrees C for 3 h. The linearity of the method was assessed by analyzing composite samples obtained by mixing fish oil deodorized at 220 degrees C with semi-refined fish oil (control). Precision was evaluated by analyzing the same samples in triplicate. Results showed that the validated method is suitable to quantify low amounts of geometrical (trans) isomers of EPA and DHA in refined fish oils. The limits of quantification of the EPA and DHA geometrical isomers are 0.16 and 0.56 g/100 g of fish oil, for EPA and DHA, respectively. Commercially available LC-PUFA oil samples were evaluated by using the validated method. The results show that the oils analyzed contain low amounts (<1% of total fatty acids) of geometrical isomers of EPA and DHA.     

Microwave-assisted synthesis and luminescent activity of imidazo[1,2-a]pyridine derivatives

In this work, a series of phenacyl bromide derivatives was synthesized and employed as key intermediate for the synthesis of substituted imidazo[1,2-a]pyridines. First, phenacyl bromide molecules were obtained from the bromination reaction of acetophenones assisted by microwave irradiation, obtaining the products 4a-v in a 15 minutes reaction with yields in the range of 50% to 99%. Subsequently, the conjugation of these molecules with 2-aminopyridine conduced to the production of imidazo[1,2-a]pyridine derivatives ( 7a-v ) in a 60-second reaction with yields of 24% to 99%. Improved yields were determined with respect to those obtained with more tedious methodologies like thermally and mechanically assisted routes. Intense luminescence emissions in the purple and blue regions of the electromagnetic spectra were observed under UV excitation according to the nature of the substituents. This environmentally friendly methodology is expected to constitute an important class of organic compounds for the development of biomarkers, photochemical sensors, and medicinal applications.