An Enzymatic N-Acylation Step Enables the Biocatalytic Synthesis of Unnatural Sialosides

Chitin is one of the most abundant and cheaply available biopolymers in Nature. Chitin has become a valuable starting material for many biotechnological products through manipulation of its N-acetyl functionality, which can be cleaved under mild conditions using the enzyme family of de-N-acetylases. However, the chemoselective enzymatic re-acylation of glucosamine derivatives, which can introduce new stable functionalities into chitin derivatives, is much less explored. Herein we describe an acylase (CmCDA from Cyclobacterium marinum) that catalyzes the N-acylation of glycosamine with a range of carboxylic acids under physiological reaction conditions. This biocatalyst closes an important gap in allowing the conversion of chitin into complex glycosides, such as C5-modified sialosides, through the use of highly selective enzyme cascades.     

Paper spray tandem mass spectrometry: A rapid approach for the assay of parabens in cosmetics and drugs

A fast methodology for the assay of parabens in drug and cosmetic preparations has been presented. The procedure developed is based on paper spray tandem mass spectrometry and isotope dilution approach. For each investigated paraben, the corresponding labeled standard has been used in order to improve the accuracy and reproducibility of the analyses. The MS experiments have been performed under MRM conditions, monitoring the transitions [M‐H]^? → m/z 92 and [M‐H]^? → m/z 98, respectively, for each analyte and the corresponding labeled internal standard. The quantitative assay has been performed using a calibration curve built from 2 to 15 mg/L. The method accuracy, in all case near 100%, was evaluated using fortified samples at two concentration levels, which are representative of the lower and the higher portion of calibration curve. The good values of LOQ, LOD, and reproducibility confirm the consistency of the developed approach.     

Characterization of Phenolic Compounds,Vitamin E and Fatty Acids from Monovarietal Virgin Olive Oils of “Picholine marocaine” Cultivar

Olive oil is an important product in the Mediterranean diet, due to its health benefits and sensorial characteristics. Picholine marocaine is the most cultivated variety in Morocco. The present research aims to evaluate the phenolic compounds, vitamin E and fatty acids of commercial Picholine marocaine virgin olive oils (VOOs) from five different North Moroccan provinces (Chefchaouen, Taounate, Errachidia, Beni Mellal and Taza), using HPLC-photodiode array (PDA)/electrospray ionization (ESI)-MS, normal phase (NP)-HPLC/ fluorescence detector (FLD) and GC-flame ionization detector (FID)/MS, respectively. The obtained results showed an average content of 130.0 mg kg⁻¹ of secoiridoids (oleuropein aglycone, 10-hydroxy-oleuropein aglycone and ligstroside aglycone, oleocanthal and oleacein), 108.1 mg kg⁻¹ of phenolic alcohols (tyrosol and hydroxytyrosol), 34.7 mg kg⁻¹ of phenolic acids (caffeic acid, ferulic acid and elenolic acid), and 8.24 mg kg⁻¹ of flavonoids (luteolin, luteolin glucoside, apigenin). With regard to vitamin E, α-tocopherol was the most abundant vitamin E (57.9 mg kg⁻¹), followed by α-tocotrienol (2.5 mg kg⁻¹), γ-tocopherol (4.5 mg kg⁻¹) and β-tocopherol (1.9 mg kg⁻¹), while δ-tocopherol was not detected. Moreover, 14 fatty acids were found and, among them, oleic acid (76.1%), linoleic acid (8.1%) palmitic acid (8.7%) and stearic acid (2.5%) were the major fatty acids detected. Finally, heat map and principal component analysis allowed us to classify the studied provinces in terms of VOO chemical composition: Chefchaouen (tyrosol and hydroxytyrosol), Taounate (oleuropein aglycone), Errachidia (ferulic acid, w-3 and w-6), Beni Mellal (oleocanthal) and Taza (luteolin and oleic acid).     

Exsolution of Nickel Nanoparticles from Mixed-Valence Metal Oxides: A Quantitative Evaluation by Magnetic Measurements

A fast and accurate experimental method is demonstrated to assess the fraction of exsolved metallic nanoparticles using magnetic measurements. As a benchmark, nanometric metallic nickel exsolved from (La_1−xSr_x)(Cr_1−yNi_y)O_3−δ is used for its high relevance as a solid oxide fuel cell component. The method is based on the difference in the magnetic response of the exsolved metallic nickel (ferromagnetic) and Sr-doped lanthanum chromite ceramic matrix (paramagnetic). The exsolved nickel results in coherent nanoparticles pinned on the surface of the Sr-doped lanthanum chromite ceramic matrix, as evidenced by electron microscopy analyses. The results obtained indicate the procedure as a fast and sensitive method to study the exsolution of ferromagnetic nanoparticles.     

Evolution of Classical and Quantum States in the Groupoid Picture of Quantum Mechanics

The evolution of states of the composition of classical and quantum systems in the groupoid formalism for physical theories introduced recently is discussed. It is shown that the notion of a classical system, in the sense of Birkhoff and von Neumann, is equivalent, in the case of systems with a countable number of outputs, to a totally disconnected groupoid with Abelian von Neumann algebra. The impossibility of evolving a separable state of a composite system made up of a classical and a quantum one into an entangled state by means of a unitary evolution is proven in accordance with Raggio’s theorem, which is extended to include a new family of separable states corresponding to the composition of a system with a totally disconnected space of outcomes and a quantum one.     

Dynamic response of rocking cracked masonry walls

The behaviour of masonry constructions results to be very far from the one characterizing ductile structures. In masonry constructions, the seismic action activates a rocking motion rather than a dissipating mechanism. A strength resource of masonry structures, properly reinforced in order to avoid early local failures, consists in exhibiting rocking behaviour, until a failure condition is attained. Aim of the paper is to investigate the dynamic behaviour of masonry single storey walls, according to Housner’s studies and innovatively introducing the effect of diagonal cracks developing from the toes of the piers and shown by typical post-earthquake cracking patterns. The proposed procedure can be easily applied to the case of multi-storey regular masonry walls with openings representing the main resistant structural components of a masonry building. Starting from the evaluation of the incipient rocking acceleration of the system, the free and forced motions of the wall are examined. In the paper, according to the classical Housner’s approach, the energy dissipation occurring during the impact is modelled. Finally, a numerical application, considering a simple constant horizontal acceleration impulse of given duration has been carried out.

     

Application of modal analysis methods to the design of wireless power transfer systems

Meccanica - Wireless recharge of electric vehicles is an important field of research. Design of inductive power transfer systems involves the optimization of resonant coils coupled through mutually...     

Hardware components wastes pyrolysis: energy recovery and liquid fraction valorisation

Pyrolysis of hardware components wastes consisting mainly in computers and television components was performed under nitrogen. The degradation products were separated in three fractions, solid, liquid and gaseous. Analyses of the three phases were carried out using gas chromatography (GC), mass spectrometry (MS), thermal analysis and infrared spectroscopy. The energetic content of the gas phase and the economic value of the liquid phase were also determined. The gas fraction produced was rich in light hydrocarbons and hydrogen. Consequently, its calorific value was high and widely sufficient to make the pyrolysis process self-sustained. The main products of the liquid phase were phenol and isopropylphenol (ca. 50–80 wt.%). The presence of Br-based compounds, deriving from the flame retardant employed in hardware components, were also detected. A controlled combustion of the solid phase permitted to obtain the glass fibres unaltered, which can be recycled.     

The ionized methylene transfer from the distonic radical cation +CH2-O-CH2 to heterocyclic compounds. A pentaquadrupole mass spectrometric study

Ion-molecule reactions of the mass-selected distonic radical cation ⁺CH₂-O-CH ₂ ^· (1) with several heterocyclic compounds have been investigated by multiple stage mass spectro- metric experiments performed in a pentaquadrupole mass spectrometer. Reactions with pyridine, 2-, 3-, and 4-ethyl, 2-methoxy, and 2-n-propyl pyridine occur mainly by transfer of CH ₂ ^+· to the nitrogen, which yields distonic N-methylene-pyridinium radical cations. The MS³ spectra of these products display very characteristic collision-induced dissociation chemistry, which is greatly affected by the position of the substituent in the pyridine ring. Ortho isomers undergo a δ-cleavage cyclization process induced by the free-radical character of the N-methylene group that yields bicyclic pyridinium cations. On the other hand, extensive CH ₂ ^+· transfer followed by rapid hydrogen atom loss, that is, a net CH⁺ transfer, occurs not to the heteroatoms, but to the aromatic ring of furan, thiophene, pyrrole, and N-methyl pyrrole. The reaction proceeds through five- to six-membered ring expansion, which yields the pyrilium, thiapyrilium, N-protonated, and N-methylated pyridine cations, respectively, as indicated by MS³ scans. Ion 1 fails to transfer CH ₂ ^+· to tetrahydrofuran, whereas a new α-distonic sulfur ion is formed in reactions with tetrahydrothiophene. Unstable N-methylene distonic ions, likely formed by transfer of CH ₂ ^+· to the nitrogen of piperidine and pyrrolidine, undergo rapid fragmentation by loss of the α-NH hydrogen to yield closed-shell immonium cations. The most thermodynamically favorable products are formed in these reactions, as estimated by ab initio calculations at the MP2/6-31G(d,p)//6-31G(d,p) + ZPE level of theory.