Surface-induced dissociation and chemical reactions of C2D 4 + on stainless steel, carbon (HOPG), and two different diamond surfaces

Surface-induced interactions of the projectile ion C₂D₄⁺ with room-temperature (hydrocarbon covered) stainless steel, carbon highly oriented pyrolytic graphite (HOPG), and two different types of diamond surfaces (O-terminated and H-terminated) were investigated over the range of incident energies from a few eV up to 50 eV. The relative abundance of the product ions in dependence on the incident energy of the projectile ion [collision-energy resolved mass spectra, (CERMS) curves] was determined. The product ion mass spectra contained ions resulting from direct dissociation of the projectile ions, from chemical reactions with the hydrocarbons on the surface, and (to a small extent) from sputtering of the surface material. Sputtering of the surface layer by low-energy Ar⁺ ions (5–400 eV) indicated the presence of hydrocarbons on all studied surfaces. The CERMS curves of the product ions were analyzed to obtain both CERMS curves for the products of direct surface-induced dissociation of the projectile ion and CERMS curves of products of surface reactions. From the former, the fraction of energy converted in the surface collision into the internal excitation of the projectile ion was estimated as 10% of the incident energy. The internal energy of the surface-excited projectile ions was very similar for all studied surfaces. The H-terminated room-temperature diamond surface differed from the other surfaces only in the fraction of product ions formed in H-atom transfer surface reactions (45% of all product ions formed versus 70% on the other surfaces).     

The Co‐Entrapment of a Homogeneous Catalyst and an Ionic Liquid by a Sol–gel Method: Recyclable Ionogel Hydrogenation Catalysts

Molecular hydrogenation catalysts have been co‐entrapped with the ionic liquid [Bmim]NTf₂ inside a silica matrix by a sol–gel method. These catalytic ionogels have been compared to simple catalyst‐doped glasses, the parent homogeneous catalysts, commercial heterogeneous catalysts, and Rh‐doped mesoporous silica. The most active ionogel has been characterised by transmission electron microscopy, X‐ray photoelectron spectroscopy, and solid state NMR before and after catalysis. The ionogel catalysts were found to be remarkably active, recyclable and resistant to chemical change.     

Unexpected Kinetics in the Polymerization of Ethene by Cp$\rm{ {_{2}^{{\ast}}}}$ZrCl2/MAO

A sterically hindered metallocene catalyst, Cp ZrCl₂ activated with methylaluminoxane (MAO), is found to polymerize ethene at temperatures up to 60° with a good propagation rate constant but low number of active sites, and with negligible β‐hydride elimination or β‐hydride transfer to monomer. Moreover, transmetalation to Al is found to be effectively irreversible for alkyl groups larger than Me. With the major mechanisms for chain transfer and termination suppressed, one might expect a living polymerization. The bulk polymerization of ethene was indeed found to be quasi‐living even when performed at well above room temperature, and furthermore provided rate constants which agreed remarkably well with those from the mass‐spectrometric study.     

Hardware components wastes pyrolysis: energy recovery and liquid fraction valorisation

Pyrolysis of hardware components wastes consisting mainly in computers and television components was performed under nitrogen. The degradation products were separated in three fractions, solid, liquid and gaseous. Analyses of the three phases were carried out using gas chromatography (GC), mass spectrometry (MS), thermal analysis and infrared spectroscopy. The energetic content of the gas phase and the economic value of the liquid phase were also determined. The gas fraction produced was rich in light hydrocarbons and hydrogen. Consequently, its calorific value was high and widely sufficient to make the pyrolysis process self-sustained. The main products of the liquid phase were phenol and isopropylphenol (ca. 50–80 wt.%). The presence of Br-based compounds, deriving from the flame retardant employed in hardware components, were also detected. A controlled combustion of the solid phase permitted to obtain the glass fibres unaltered, which can be recycled.     

Fingerprinting of bottle-grade poly(ethylene terephthalate) via matrix-assisted laser desorption/ionization mass spectrometry

Matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) has been shown to provide a valuable technique to study the thermomechanical degradation of poly(ethylene terephthalate) (PET). MALDI-MS has been tested to monitor both the admixture of post-consumption bottle-grade PET (PET_pc-btg) with virgin bottle-grade PET (PET_v-btg) and the thermomechanical degradation effects on the chemical properties of PET_v-btg. Principal component analysis of MALDI-MS data classify the samples into groups with specific features: a) PET-btg with intrinsic viscosities of 0.80 or 0.65-0.60 dL g⁻¹); b) processed or virgin PET with the same intrinsic viscosity; c) PET_v-btg from PET containing PET_pc-btg; and d) PET_v-btg from different manufacturers. MALDI-MS data is therefore able to reveal the quality of PET-btg resins preventing frauds and illegal use of recycled PET-btg.     

Conformational control of benzyl-o-carboranylbenzene derivatives and molecular encapsulation of acetone in the dynamically formed space of 1,3,5-tris(2-benzyl-o-carboran-1-yl)benzene

A 1,3,5-substituted benzene platform has been widely used in the fields of supramolecular chemistry and molecular recognition. Here, we show that 1,3,5-tris(2-benzyl-o-carboran-1-yl)benzene 6 exhibits solvent-dependent conformation in the crystalline state. Recrystallization from dichloromethane-n-pentane gave the anti conformation 6-anti, while recrystallization from methanol-acetone gave the syn conformation 6-syn, in which the three benzyl-o-carboranyl moieties are located to one side of the central benzene ring. Interestingly, one acetone molecule is captured in the π-rich space of 6-syn and two complexes facing each other encapsulate two acetone molecules in a π-rich container formed by the eight benzene rings. The inclusion involves several weak interactions, that is, T-shaped C-H···π interactions, and C-H···O and C-H···π interactions. Two C-H···O interactions involving benzylic C-H hydrogens activated by the electron-withdrawing character of the o-carborane cage and the oxygen atom of the acetone seem to be the most important. DFT calculations indicate that the binding energy for entrapment of acetone is 6.6 kcal/mol. Inclusion of acetone is achieved through not only multiple C-H···O interactions but also a number of C-H···π interactions. The third benzyl-o-carborane moiety is fixed in the syn conformation by intramolecular and intermolecular C-H···π interactions.     

Halo-carbonyl complexes of palladium,platinum and gold

In this review we summarize some recent literature data concerning synthetic procedures, properties, structure, reactivity and applications of halo-carbonyl complexes of palladium, platinum and gold, taking into consideration that the organometallic chemistry of these metals, with a particular attention to the halo-carbonyls, has been reviewed 20 years ago [F. Calderazzo, J. Organomet. Chem. 400 (1990) 303]. A brief overview of the early studies is provided.     

The assay of pterostilbene in spiked matrices by liquid chromatography tandem mass spectrometry and isotope dilution method

Pterostilbene (trans‐3,5‐dimethoxy‐4‐hydroxystilbene) is an active component found in several plant species, exhibiting important pharmacological properties. A new and reliable method of assaying this phyto compound in various matrices is presented; the assay is based on (1) the selectivity of liquid chromatography (LC) hyphenated with electrospray ionisation (ESI), (2) the specificity of a two‐step mass spectrometric analysis (MS/MS) and (3) the accuracy of the isotope dilution method. The labelled analogue may be conveniently synthesised in a few steps. The sensitivity of the method is confirmed by the very low limit of detection (LOD) and limit of quantitation (LOQ) values achieved in the assay of pterostilbene in two distinct fortified matrices, and is further supported by the observed accuracy values. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of polymers containing regularly distributed tetrathia‐[7]‐elicene units along the backbone

A tetrathia‐[7]‐helicene bearing in the 2 and 13 positions cyanovinyl groups was used as comonomer in the Michael‐type polyaddition reaction with N,N′‐bis(β‐mercaptoethyl)piperazine. This led to a new polymer bearing tetrathia‐[7]‐helicene units regularly distributed along the polymer backbone, which may be regarded as the first example of a new family of potentially useful nonlinear optical materials. All products were structurally characterized by ¹H and ¹³C NMR spectroscopy. Differential scanning calorimetry characterizations revealed the presence, in both monomeric and polymeric helicenes, of glass‐transition like temperatures, associated to some conformational variation of the helicene units. The optical properties, the film formation and the morphology of the polymer‐containing tetratia‐[7]‐helicenes were also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010