Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

Mass‐Spectrometric Observation of Counter Anion Production in SU‐8 Exposed to UV Light and its Use for Dill C Parameter Determination

Photopolymerization is a phenomenon that is the basis of much of today's microfabrication technology and intense research is conducted to improve its control and the characteristics of end products for a variety of applications. The design of microscopic structures often relies on the accurate knowledge and modeling of photopolymer's behavior upon exposure, i.e. the Dill parameters, for each radiation species of interest and therefore the development of flexible characterization techniques is of great importance. SU‐8 is a popular compound that is representative of a whole class that relies on cationic polymerization, where an acid is obtained via photolysis of an onium salt during exposure. Here we report on the observation of SbF₆^? via laser desorption mass spectrometry on SU‐8 exposed to UV light at the wavelength of 365 nm and demonstrate that the yield of this counter‐anion as a function of exposure is consistent with the Dill C parameter value available in the literature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 967–972     

Enantiodivergence in the reduction of α-methyl and α-halomethyl enones by microorganisms

Enones (Z)-3-methyl-(Z)-3-chloromethyl- and (Z)-3-bromomethyl-4-R-3-buten-2-one (R = n-pentyl, phenyl, 2′- and 4′-chlorophenyl, 3′- and 4′-nitrophenyl, 4′-methoxyphenyl) were synthesized and subjected to reduction by the microorganisms Saccharomyces cerevisiae andGeotrichum candidum. Whereas the bioreduction of 3-methy-4-R-3-buten-2-ones afforded the corresponding (S)-4-R-3-methybutan-2-ones, the bioreduction of 3-chloromethyl- and 3-bromomethyl-4-R-3-buten-2-ones afforded the corresponding (R)-4-R-3-methybutan-2-ones.     

Pb2+ Defects in perovskite-like KMgF3 crystals

Abstract

The physical properties of Pb²⁺ impurities in the perovskite-like lattice of KMgF₃ are very similar to those of (ns)² ions in alkali halides. The impurity inhomogeneous distribution leads to high dopant levels in the bottom region of the crystals, with a segregation coefficient equal to 0. 020. The optical features of the 336 nm emission support its attribution to luminescence of Pb²⁺ ions from the relaxed excited B state.     

Fractional order models for the homogenization and wave propagation analysis in periodic elastic beams

Meccanica - The advancement of manufacturing techniques has led to a rapid increase in the design and fabrication of periodic and architectured materials for a variety of dynamics and wave...     

Surface modification of polyamide 12 angioplasty balloons by photochemical reaction with an aromatic azide

Polyamide 12 (PA12) is used in a variety of applications when low moisture absorption, good dimensional stability, and toughness are required. Polyamide 12 is one of the polymers most frequently employed to fabricate angioplasty balloon catheters; however, its high hydrophobicity and chemical inertness require the application of coatings to make its surface more hydrophilic and biocompatible. In this work, an alternative method, based on the photochemical reaction of PA12 with a hydrophilic aromatic azide, was developed. Static and dynamic contact angle measurements evidenced that the surface modification process was able to improve PA12 wettability and that the effects were retained even after 12 months from surface treatment. Polyamide 12 modification resulted in an increase of its surface free energy, as evaluated by the van Oss, Good, and Chaudhury method. X‐ray photoelectron spectroscopy confirmed the presence of the aromatic azide on PA12 surface. Finally, compliance tests showed that the modification process did not reduce the mechanical performance of balloons.     

Reducing the computational cost of NMR crystallography of organic powders at natural isotopic abundance with the help of 13C-13C dipolar couplings

Structure determination of functional organic compounds remains a formidable challenge when the sample exists as a powder. Nuclear magnetic resonance crystallography approaches based on the comparison of experimental and Density Functional Theory (DFT)-computed ¹H chemical shifts have already demonstrated great potential for structure determination of organic powders, but limitations still persist. In this study, we discuss the possibility of using ¹³C-¹³C dipolar couplings quantified on powdered theophylline at natural isotopic abundance with the help of dynamic nuclear polarization, to realize a DFT-free, rapid screening of a pool of structures predicted by ab initio random structure search. We show that although ¹³C-¹³C dipolar couplings can identify structures possessing long range structural motifs and unit cell parameters close to those of the true structure, it must be complemented with other data to recover information about the presence and the chemical nature of the supramolecular interactions.     

Kinetics studies of 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol,and 2,4,4-trimethyl-1-pentanol with chlorine atoms: Photooxidation mechanism of 2,4,4-trimethyl-1-pentanol

The rate constants for the reaction between chlorine atoms and either 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, or 2,4,4-trimethyl-1-pentanol at 298 K were determined using the relative method with 2-butanol and 1-pentanol as reference compounds. The values obtained for 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, and 2,4,4-trimethyl-1-pentanol (k × 10¹⁰ cm³ molec⁻¹ s⁻¹) were, respectively, (2.64 ± 0.5), (2.72 ± 0.5), and (2.50 ± 0.4), in agreement with the values of the rate constants reported in bibliography for similar alcohols and the values estimated by structure activity relationship methods. The photooxidation products of 2,4,4-trimethyl-1-pentanol initiated by chlorine atoms were identified (formaldehyde, 2-propanone, 2,2-dimethyl propanal, 4,4,-dimethyl-2-pentanone, and 3,3-dimethylbutanal), and the reaction mechanism was determined.     

Irreversible Structural Changes of Copper Hexacyanoferrate Used as a Cathode in Zn-Ion Batteries

The structural changes of copper hexacyanoferrate (CuHCF), a Prussian blue analogue, which occur when used as a cathode in an aqueous Zn-ion battery, are investigated using electron microscopy techniques. The evolution of Zn_xCu_1−xHCF phases possessing wire and cubic morphologies from initial CuHCF nanoparticles are monitored after hundreds of cycles. Irreversible introduction of Zn ions to CuHCF is revealed locally using scanning transmission electron microscopy. A substitution mechanism is proposed to explain the increasing Zn content within the cathode material while simultaneously the Cu content is lowered during Zn-ion battery cycling. The present study demonstrates that the irreversible introduction of Zn ions is responsible for the decreasing Zn ion capacity of the CuHCF cathode in high electrolyte concentration.