Fire retardancy of polymer clay nanocomposites: Is there an influence of the nanomorphology?

The obvious aspect of nanodispersion and its role when investigating fire retardancy is not often clearly commented upon in the literature. Polymer clay nanocomposites can exhibit different morphologies and these might have consequences for their fire behaviour. Using solid state NMR to quantify the nanodispersion of organoclay in polyamide-6 (PA-6), we have prepared by melt blending PA-6/clay nanocomposite exhibiting different nanomorphologies. NMR results are consistent with transmission electron microscopy (TEM) images but the advantage of NMR is that it is representative of the whole sample and provides a precise quantification. PA-6 nanocomposites exhibit significant reduction of PHRR but the nanomorphology (exfoliation, intercalation and presence of tactoids) does not play any significant role. In other words, we have clearly shown that if nanodispersion is achieved, polymer/clay nanocomposite should exhibit fire retardant properties.     

DFT modeling of reactivity in an ionic liquid: How many ion pairs?

The modeling of reactivity in an ionic liquid is examined with DFT and DFT/MM calculations on the S(N)2 intramolecular rearrangement of the Z-phenylhydrazone of 3-benzoyl-5-phenyl-1,2,4-oxadiazole into 4-benzoylamino-2,5-diphenyl-1,2,3-triazole induced by amines. Experimental research has shown that the reaction occurs in 1-butyl-3-methylimidazolium tetrafluoroborate, and in conventional organic solvents such as acetonitrile with comparable rates. The structure for the reactants, transition states and products for the rate-determining step are optimized, and the energy barrier is computed in three different environments: gas phase, water solvent, and ionic liquid. The results are encouraging in describing the energy barrier in the ionic liquid. A simple model is formulated to explain the effect of the solvent in this particular process, and a procedure to study theoretically the reactivity in an ionic liquid is proposed.     

Water-soluble polyesters from long chain alkylesters of citric acid and poly(ethylene glycol)

Long chain aliphatic alcohols have been used as model compounds to develop a preparative method for a water-soluble material, which could be a carrier for triacontanol, a highly hydrophobic plant growth regulator. New polyesters from long chain aliphatic (C = 12, 18 and 22) mono-1-alkyl citrates and poly(ethylene glycol) were synthesized and characterized by NMR spectroscopy. The polyester containing the triacontyl moiety was obtained from mono-1-triacontyl citrate, which was synthesized from the corresponding alcohol extracted from the Agave fourcroydes. The molecular weight of the polyesters depends on experimental conditions during synthesis such as reaction time, atmosphere, catalyst concentration and temperature. The reaction is second order in the early stage of the polyester synthesis. The reaction rate constant is independent of the length of the aliphatic chain, but it decreases with increasing of the poly(ethylene glycol) employed. Turbidity measurements have been used to study the polyester solubility. Solubility characteristics were found to depend on the of poly(ethylene glycol), the aliphatic-chain length and the value of for the polyester. These preparations could potentially be used to release triacontanol.     

Electrostastic control of spontaneous curvature in catanionic reverse micelles

By means of small-angle neutron scattering and conductivity measurements, we study the microstructure of octylammoniumoctanoate/octane/water catanionic reverse microemulsions with an excess of anionic or cationic surfactant. Increasing the surface charge makes the microemulsion able to incorporate much more water than in the neutral case, up to 10 water molecules per surfactant. Even with charges in the surfactant film, wormlike micelles are present in the microemulsion domain. Along water dilution lines, the classical rod-to-sphere transition due to the minimization of the curvature energy of the rigid surfactant film is observed. When temperature is decreased, a re-entrant phase transition associated with the liquid-gas equilibrium of attractive cylinders is observed. Using the framework of the Tlusty-Safran theory, attraction could originate from junctions between wormlike reverse micelles. In any case, the spontaneous curvature of the catanionic surfactant film depends on both the temperature and the net charge, whatever the sign of the latter.     

Infrared and visible emission of Er in combustion-synthesized CaAl2O4 phosphors

New near-infrared luminescent, monoclinic CaAl₂O₄:Er³⁺ phosphor was prepared by using the combustion route at furnace temperatures as low as 500 °C in a few minutes. Combustion synthesized phosphor has been well characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive analysis of X-ray (EDAX) mapping studies. The luminescence spectra of Er³⁺-doped calcium aluminate were studied at UV (380 nm), vis (488 nm) and IR (980 nm) excitation. Upon UV and vis excitation, the CaAl₂O₄:Er³⁺ phosphor exhibits emission bands at ~523 nm and at ~547 nm, corresponding to transitions from the ²H_11/2 and ⁴S_3/2 erbium levels to the ⁴I_15/2 ground state. A strong luminescence at 1.55 μm in the infrared (IR) region due to ⁴I_13/2→⁴I_15/2 transition has been observed in CaAl₂O₄:Er³⁺ phosphor upon 980 nm CW pumping. In the spectrum of IR-excited up-conversion luminescence, green (~523 and ~547 nm) and red (662 nm) luminescence bands were present, the latter associated with the ⁴F_9/2→⁴I_15/2 transitions of Er³⁺ ions. Both excited state absorption and energy transfer may be proposed as processes responsible for the population of the ⁴S_3/2 and ⁴F_9/2 erbium levels upon IR excitation. The mechanisms responsible for the up-conversion luminescence are discussed.     

Chemo-regioselectivity in heterogeneous catalysis: competitive routes for C = O and C = C hydrogenations from a theoretical approach

The usual empirical rule stating that the C=C bond is more reactive than the C=O group for catalytic hydrogenations of unsaturated aldehydes is invalidated from the present study. Density functional theory calculations of all the competitive hydrogenation routes of acrolein on Pt(111) reveals conversely that the attack at the C=O bond is systematically favored. The explanation of such catalytic behavior is the existence of metastable precursor states for the O-H bond formation showing that the attack at the oxygen atom follows a new preferential mechanism where the C=O moiety is not directly bonded with the Pt surface atoms, hence yielding an intermediate pathway between Langmuir-Hinshelwood and Rideal-Eley general types of mechanisms. When the whole catalytic cycle is considered, our results reconcile with experimental studies devoted to hydrogenation of acrolein on Pt, since the desorption step of the partially hydrogenated product (unsaturated alcohol versus saturated aldehyde) plays a key role for the selectivity.     

Efficient synthesis of novel NK1 receptor antagonists: selective 1,4-addition of grignard reagents to 6-chloronicotinic acid derivatives

A new efficient synthesis of two novel classes of NK1 receptor antagonists, among them befetupitant and netupitant, starting from 6-chloronicotinic acid is described. The introduction of the o-tolyl substituent at C4 of the pyridine ring was achieved by a one-pot selective 1,4-Grignard addition/oxidation sequence to 6-chloronicotinic acid or a derivative of it. The scope of this addition/oxidation sequence was examined. It was also shown that the carboxylic function can be converted to a methyl amino group by a Hofmann rearrangement followed by reduction. Furthermore, a new high-yielding synthesis of 2-(3,5-bistrifluoromethylphenyl)-2-methyl propionic acid based on the carbonylation of the tertiary alcohol obtained by Grignard addition of 3,5-bis(trifluoromethyl)bromobenzene to acetone was established.     

Are the Interactions between Recombinant Prion Proteins and Polymeric Surfaces Related to the Hydrophilic/Hydrophobic Balance?

New non‐fouling tubes are developed and their influence on the adhesion of neuroproteins is studied. Recombinant prion proteins are considered as a single component representative of hydrophobic proteins. Samples are stored for 24 h at 4 °C in tubes coated with two different coatings: poly(N‐isopropylacrylamide) as a hydrophilic surface and a plasma‐fluorinated coating as a hydrophobic one. The protein adhesion is monitored by ELISA tests, XPS and confocal microscopy. It appears that the highest recovery of recombinant prion protein in the liquid phase is obtained with the hydrophilic surface while the hydrophobic character of the storage tube induces an important amount of biological loss. However, the recovery is not complete even for tubes coated with poly(N‐isopropylacrylamide).

     

A novel method for quantification of sulfolane (a metabolite of busulfan) in plasma by gas chromatography–tandem mass spectrometry

The role of busulfan (Bu) metabolites in the adverse events seen during hematopoietic stem cell transplantation and in drug interactions is not explored. Lack of availability of established analytical methods limits our understanding in this area. The present work describes a novel gas chromatography-tandem mass spectrometric assay for the analysis of sulfolane (Su) in plasma of patients receiving high-dose Bu. Su and Bu were extracted from a single 100 μL plasma sample by liquid-liquid extraction. Bu was separately derivatized with 2,3,5,6-tetrafluorothiophenolfluorinated agent. Mass spectrometric detection of the analytes was performed in the selected reaction monitoring mode on a triple quadrupole instrument after electronic impact ionization. Bu and Su were analyzed with separate chromatographic programs, lasting 5?min each. The assay for Su was found to be linear in the concentration range of 20-400?ng/mL. The method has satisfactory sensitivity (lower limit of quantification, 20?ng/mL) and precision (relative standard deviation less than 15?%) for all the concentrations tested with a good trueness (100?±?5?%). This method was applied to measure Su from pediatric patients with samples collected 4?h after dose 1 (n?=?46), before dose 7 (n?=?56), and after dose 9 (n?=?54) infusions of Bu. Su (mean?±?SD) was detectable in plasma of patients 4?h after dose 1, and higher levels were observed after dose 9 (249.9?±?123.4?ng/mL). This method may be used in clinical studies investigating the role of Su on adverse events and drug interactions associated with Bu therapy.