Selective dispersion of single-walled carbon nanotubes with specific chiral indices by poly(N-decyl-2,7-carbazole)

Physico-chemical methods to sort single-walled carbon nanotubes (SWNTs) by chiral index are presently lacking but are required for in-depth experimental analysis and also for potential future applications of specific species. Here we report the unexpected selectivity of poly(N-decyl-2,7-carbazole) to almost exclusively disperse semiconducting SWNTs with differences of their chiral indices (n - m) ≥ 2 in toluene. The observed selectivity complements perfectly the dispersing features of the fluorene analogue poly(9,9-dialkyl-2,7-fluorene), which disperses semiconducting SWNTs with (n - m) ≤ 2 in toluene. The dispersed samples are further purified by density gradient centrifugation and analyzed by photoluminescence excitation spectroscopy. All-atom molecular modeling with decamer model compounds of the polymers and (10,2) and (7,6) SWNTs suggests differences in the π-π stacking interaction as origin of the selectivity. We observe energetically favored complexes between the (10,2) SWNT and the carbazole decamer and between the (7,6) SWNT and the fluorene decamer, respectively. These findings demonstrate that subtle structural changes of polymers lead to selective solvation of different families of carbon nanotubes. Furthermore, chemical screening of closely related polymers may pave the way toward simple, low-cost, and index-specific isolation of SWNTs.     

Quantum dynamics study of fulvene double bond photoisomerization: the role of intramolecular vibrational energy redistribution and excitation energy

The double bond photoisomerization of fulvene has been studied with quantum dynamics calculations using the multi-configuration time-dependent Hartree method. Fulvene is a test case to develop optical control strategies based on the knowledge of the excited state decay mechanism. The decay takes place on a time scale of several hundred femtoseconds, and the potential energy surface is centered around a conical intersection seam between the ground and excited state. The competition between unreactive decay and photoisomerization depends on the region of the seam accessed during the decay. The dynamics are carried out on a four-dimensional model surface, parametrized from complete active space self-consistent field calculations, that captures the main features of the seam (energy and locus of the seam and associated branching space vectors). Wave packet propagations initiated by single laser pulses of 5-25 fs duration and 1.85-4 eV excitation energy show the principal characteristics of the first 150 fs of the photodynamics. Initially, the excitation energy is transferred to a bond stretching mode that leads the wave packet to the seam, inducing the regeneration of the reactant. The photoisomerization starts after the vibrational energy has flowed from the bond stretching to the torsional mode. In our propagations, intramolecular energy redistribution (IVR) is accelerated for higher excess energies along the bond stretch mode. Thus, the competition between unreactive decay and isomerization depends on the rate of IVR between the bond stretch and torsion coordinates, which in turn depends on the excitation energy. These results set the ground for the development of future optical control strategies.     

Synthesis of trifluoromethyl cyclohexyl, cyclohexenyl and aryl compounds via stepwise Robinson annulation

The diketone 2-fluoro-2-(trifluoromethyl)-1-phenylhexane-1,5-dione 3 was synthesized by a Mukaiyama Michael type reaction from the corresponding tetrafluoroenol silyl ether prepared from pentafluoropropiophenone. This diketone was treated under basic conditions and was converted, depending on the stoichiometry of the base, into the surprisingly stable ketol 4-fluoro-4-(trifluoromethyl)-3-hydroxy-3-phenylcyclohexanone 4 as a single diastereomer (catalytic KOH) or to the biphenylol 6-(trifluoromethyl)biphenyl-3-ol (excess KOH, THF) 5. Solvolysis of the trifluoromethyl group (anionic activation) occurred using excess KOH in alcohol. The corresponding cyclohexenone derivative 7, the usual product of Robinson annulation, might be prepared in good yield via mesylation of the ketol. Thus various unprecedented fluorinated cyclohexane and aromatic derivatives were achieved in a few steps from the commercially available pentafluoropropiophenone.     

Approximation of stationary solutions of Gaussian driven stochastic differential equations

We study sequences of empirical measures of Euler schemes associated to some non-Markovian SDEs: SDEs driven by Gaussian processes with stationary increments. We obtain the functional convergence of this sequence to a stationary solution to the SDE. Then, we end the paper by some specific properties of this stationary solution. We show that, in contrast to Markovian SDEs, its initial random value and the driving Gaussian process are always dependent. However, under an integral representation assumption, we also obtain that the past of the solution is independent of the future of the underlying innovation process of the Gaussian driving process.     

Theoretical studies of the tunneling splitting of malonaldehyde using the multiconfiguration time-dependent Hartree approach

Full dimensional multi-configuration time-dependent Hartree calculations of the zero point energy and the tunneling splitting of malonaldehyde using a recently published potential energy surface [Y. Wang, B. J. Braams, J. M. Bowman, S. Carter, and D. P. Tew, J. Chem. Phys. 128, 224314 (2008)] are reported. The potential energy surface has been approximated by a modified version of the n-mode representation and careful convergence check has been performed to ensure accurate results. The obtained value for the splitting (23.4 cm(-1)) is in acceptable agreement with the experimental value of 21.583 cm(-1). The computed zero-point-energy is 14,670 cm(-1) which is lower than previous results of Wang et al., but likely to be about 4 cm(-1) too low because of shortcomings of the n-mode representation of the potential. The energies reported in this abstract contain a correction to account for neglected vibrational angular momentum terms.     

Debundling, selection and release of SWNTs using fluorene-based photocleavable polymers

Photocleavable polymers based on 9,9-dialkylfluorene backbone and o-nitrobenzylether were designed and synthesized to obtain stable (n,m) enriched suspensions of semiconducting SWNTs in toluene. Photoirradiation of the suspensions triggered the precipitation of the SWNTs and TEM images indicate close packing of SWNTs pointing at partial removal of the coating polymer.     

Kinetics of iron–copper sulphides oxidation in relation to protohistoric copper smelting

This article deals with one specific step of the copper extractive metallurgy process: the roasting of iron–copper sulphides. It aims at shedding light on an archaeological issue: the reconstruction of the copper extractive metallurgy processes during protohistory (IV^e–II^e millennium BC). Experimental simulations are performed at laboratory scale by modelizing the conditions of protohistoric furnaces. Kinetic of roasting is studied by thermogravimetry combined with the physico-chemical analysis of synthetic products. The influence of two parameters is studied: (i) the temperature (773, 973 and 1173 K) and (ii) the granularity of the roasted ores (1 mm and 100 μm). In each case, the chemical mechanism governing the oxidation of iron copper sulphide is proposed. Apart from one extreme case (∅ = 1 mm; T = 773 K), it is showed that kinetic is controlled by the transport of molecular oxygen (O₂) from the gas to the grain surface. Moreover, we prove that, in some cases where the diffusivity of gaseous oxygen is low, roasting can be accelerated by the presence of an oxide, which constitute an in-situ source of oxygen. Theses experiments support the hypothesis that such a technique could have allowed a roasting process where iron and sulfur were removed by the solid oxygen instead of the gaseous oxygen. These results allow to validate a one-step copper smelting process starting from sulphidic ores, and to identify the experimental parameters of this process.     

Detection of pentatetraene by reaction of the ethynyl radical (C2H) with allene (CH2=C=CH2) at room temperature

The reaction of ethynyl radical (C(2)H) with allene (C(3)H(4)) at room temperature is investigated using an improved synchrotron multiplexed photoionization mass spectrometer (MPIMS) coupled to tunable vacuum ultraviolet (VUV) synchrotron radiation from the Advanced Light Source at the Lawrence Berkeley National Laboratory (LBNL). The orthogonal-accelerated time-of-flight mass spectrometer (OA-TOF) compared to the magnetic sector mass spectrometer used in a previous investigation of the title reaction (Phys. Chem. Chem. Phys., 2007, 9, 4291) enables more sensitive and selective detection of low-yield isomeric products. The C(5)H(4) isomer with the lowest ionization energy, pentatetraene, is now identified as a product of the reaction. Pentatetraene is predicted to be formed based on recent ab initio/RRKM calculations (Phys. Chem. Chem. Phys., 2010, 12, 2606) on the C(5)H(5) potential energy surface. However, the computed branching fraction for pentatetraene is predicted to be five times higher than that for methyldiacetylene, whereas experimentally the branching fraction of pentatetraene is observed to be small compared to that of methyldiacetylene. Although H-atom assisted isomerization of the products can affect isomer distribution measurements, isomerization has a negligible effect in this case. The kinetic behavior of the several C(5)H(4) isomers is identical, as obtained by time-dependent photoionization spectra. Even for high allene concentrations (and hence higher H-atom concentrations) no decay of the pentatetraene fraction is observed, indicating that H-assisted isomerization of pentatetraene to methyldiacetylene does not account for the difference between the experimental data and the theoretical branching ratios.     

Peroxy radical isomerization in the oxidation of isoprene

We report experimental evidence for the formation of C(5)-hydroperoxyaldehydes (HPALDs) from 1,6-H-shift isomerizations in peroxy radicals formed from the hydroxyl radical (OH) oxidation of 2-methyl-1,3-butadiene (isoprene). At 295 K, the isomerization rate of isoprene peroxy radicals (ISO2?) relative to the rate of reaction of ISO2? + HO2 is k(isom)(295)/(k(ISO2?+HO2)(295)) = (1.2 ± 0.6) x 10(8) mol cm(-3), or k(isom)(295) ? 0.002 s(-1). The temperature dependence of this rate was determined through experiments conducted at 295, 310 and 318 K and is well described by k(isom)(T)/(k(ISO2?+HO2)(T)) = 2.0 x 10(21) exp(-9000/T) mol cm(-3). The overall uncertainty in the isomerization rate (relative to k(ISO2?+HO2)) is estimated to be 50%. Peroxy radicals from the oxidation of the fully deuterated isoprene analog isomerize at a rate ～15 times slower than non-deuterated isoprene. The fraction of isoprene peroxy radicals reacting by 1,6-H-shift isomerization is estimated to be 8-11% globally, with values up to 20% in tropical regions.