Expanded Pyridiniums: Bis‐cyclization of Branched Pyridiniums into Their Fused Polycyclic and Positively Charged Derivatives—Assessing the Impact of Pericondensation on Structural,Electrochemical, Electronic,and Photophysical Features

This study evaluates the impact of the extension of the π‐conjugated system of pyridiniums on their various properties. The molecular scaffold of aryl‐substituted expanded pyridiniums (referred to as branched species) can be photochemically bis‐cyclized into the corresponding fused polycyclic derivatives (referred to as pericondensed species). The representative 1,2,4,6‐tetraphenylpyridinium ( 1^H ) and 1,2,3,5,6‐pentaphenyl‐4‐(p‐tolyl)pyridinium ( 2^Me ) tetra‐ and hexa‐branched pyridiniums are herein compared with their corresponding pericondensed derivatives, the fully fused 9‐phenylbenzo[1,2]quinolizino[3,4,5,6‐def]phenanthridinium ( 1^H f ) and the hitherto unknown hemifused 9‐methyl‐1,2,3‐triphenylbenzo[h]phenanthro[9,10,1‐def]isoquinolinium ( 2^Me f ). Combined solid‐state X‐ray crystallography and solution NMR experiments showed that stacking interactions are barely efficient when the pericondensed pyridiniums are not appropriately substituted. The electrochemical study revealed that the first reduction process of all the expanded pyridiniums occurs at around ?1 V vs. SCE, which indicates that the lowest unoccupied molecular orbital (LUMO) remains essentially localized on the pyridinium core regardless of pericondensation. In contrast, the electronic and photophysical properties are significantly affected on going from branched to pericondensed pyridiniums. Typically, the number of absorption bands increases with extended activity towards the visible region (down to ca. 450 nm in MeCN), whereas emission quantum yields are increased by three orders of magnitude (at ca. 0.25 on average). A relationship is established between the observed differential impact of the pericondensation and the importance of the localized LUMO on the properties considered: predominant for the first reduction process compared with secondary for the optical and photophysical properties.     

Ultraviolet Radiation in the Rhône River Lenses of Low Salinity and in Marine Waters of the Northwestern Mediterranean Sea: Attenuation and Effects on Bacterial Activities and Net Community Production

The high content in nutrients of freshwater outflows induces highly productive and buoyant plumes spreading over marine waters (MW). As a consequence, the growth of organisms developing in these low‐salinity waters (LSW) might be potentially affected by UV‐R (280–400 nm). This study investigated the penetration of UV‐R and its impact on net community production (NCP) and bacterial protein (B_PROTS) and DNA (B_DNAS) synthesis in mesotrophic‐LSW formed from the Rhône River and in oligotrophic MW of the Northwestern Mediterranean Sea (Gulf of Lions) in May 2006. High concentrations of chlorophyll a (up to 8 μg L^?1) measured in the LSW (<37.8 psu, 0–10 m) were the main factor influencing the diffuse attenuation coefficients (K_d) of both UV‐R and photosynthetically active radiation (PAR). The mean ratio of the K_d measured between the LSW and the MW increased with wavelength from 2.4 at 305 nm to 2.9 at 380 nm and 3.1 for PAR indicating more similarity in the UV region. NCP was severely inhibited by UV‐R at the surface of the LSW, whereas no effect was measured in the surrounding MW. In contrast, B_PROTS and B_DNAS were affected deeper by UV‐R in the MW (up to 8 m depth) compared to the LSW where inhibition was only observed at the surface. Differences in response of bacteria in LSW and MW are largely explained by differences in UV‐R transparency; however, transplant experiments indicate that bacterial assemblages from the MW were also more sensitive to UV‐R than those present in the LSW. We also observed that higher activity of bacteria after nutrient additions increased their sensitivity to UV‐R during the day, but favored their recovery during the night incubation period for both LSW and MW. Results suggest that riverine and nutrient inputs may alter the effects of UV‐R on microbial activity by attenuating the UV‐R penetration and by modifying the physiology of bacteria.     

二茂铁-噻吩和联噻吩桥连吡啶盐类化合物的合成与电化学性质

设计并合成了3个二取代和三取代的二茂铁-噻吩、二茂铁-联噻吩吡啶盐类化合物： 碘化(E,E)-N-甲基-2,4,6-三{2-[5-(2-二茂铁乙烯基)噻吩-2-基]乙烯基}吡啶盐、 碘化(E,E)-N-甲基-2,6-二{2-[5’-(2-二茂铁乙烯基)-2,2’-联噻吩-5-基]乙烯基}吡啶盐、碘化(E,E)-N-甲基-2,4,6-三{2-[5’-(2-二茂铁乙烯基)-2,2’-联噻吩-5-基]乙烯基}吡啶盐。初步研究了这些化合物的电化学性质,结果表明,该类多取代二茂铁吡啶盐具有很好的氧化-还原可逆性,是潜在的电化学分子材料。     

Two‐Way Molecular Switches with Large Nonlinear Optical Contrast

Molecular switches : Highly efficient acido‐ and photoswitchable frequency doublers (see scheme) based on the indolinooxazolidine core are studied by means of hyper‐Rayleigh experiments and quantum‐chemical calculations.

     

Synthesis and characterization of A4[Re6Q8L6]@SiO2 red-emitting silica nanoparticles based on Re6 metal atom clusters (A = Cs or K, Q = S or Se, and L = OH or CN)

Metal atom clusters constitute very promising candidates as luminophores for applications in biotechnology because they are nanosized entities offering robust luminescence in the near-infrared field (NIR). However, they cannot be used as prepared for biological applications because of potential toxic effects and quenching of the clusters' luminescence in aqueous media, and they therefore need to be dispersed in a biocompatible matrix. We describe herein the encapsulation of octahedral rhenium clusters, denoted as A(4)[Re(6)Q(8)L(6)] (A = Cs or K, Q = S or Se, and L = OH or CN), in silica nanoparticles by a water-in-oil microemulsion process, paying particular attention to the clusters' stability. The obtained A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles are 30 nm in size with good monodispersity and a perfectly spherical shape, as shown by scanning electron microscopy (SEM). The presence of cluster units inside the silica matrix was evidenced by scanning transmission electron microscopy in annular dark-field mode (ADF-STEM). From the point of view of their optical properties, the A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles show red and NIR emission under UV excitation, even when dispersed in water. The evolution of the structural and luminescence properties of clusters before and after encapsulation was followed by Raman and photoluminescence spectroscopy.     

Synthesis and characterization of high surface area TiO2/SiO2 mesostructured nanocomposite

Recently titania synthesis was reported using various structuration procedures, leading to the production of solid presenting high surface area but exhibiting moderate thermal stability. The study presents the synthesis of TiO₂/SiO₂ nanocomposites, a solid that can advantageously replace bulk titania samples as catalyst support. The silica host support used for the synthesis of the nanocomposite is a SBA-15 type silica, having a well-defined 2D hexagonal pore structure and a large pore size. The control of the impregnation media is important to obtain dispersed titania crystals into the porosity, the best results have been obtained using an impregnation in an excess of solvent. After calcination at low temperature (400 °C), nanocomposites having titania nanodomains (～2–3 nm) located inside the pores and no external aggregates visible are obtained. This nanocomposite exhibits high specific surface area (close to that of the silica host support, even with a titania loading of 55 wt.%) and a narrow pore size distribution. Surprisingly, the increase in calcination temperature up to 800 °C does not allow to detect the anatase to rutile transition. Even at 800 °C, the hexagonal mesoporous structure of the silica support is maintained, and the anatase crystal domain size is evaluated at ～10 nm, a size close to that of the silica host support porosity (8.4 nm). Comparison of their physical properties with the results presented in literature for bulk samples evidenced that these TiO₂/SiO₂ solids are promising in term of thermal stability.     

A generalised 17-state vibronic-coupling Hamiltonian model for ethylene

In a previous work [B. Lasorne, M. A. Robb, H.-D. Meyer, and F. Gatti, "The electronic excited states of ethylene with large-amplitude deformations: A dynamical symmetry group investigation," Chem. Phys. 377, 30-45 (2010); and ibid. 382, 132 (2011) (Erratum)], we investigated the electronic structure of ethylene (ethene, C(2)H(4)) in terms of 17 dominant configurations selected at the multiconfiguration self-consistent field level of theory. These were shown to be sufficient to recover most of the static electron correlation among the first valence and Rydberg states at all geometries. We also devised a strategy to build a 17-quasidiabatic-state matrix representation of the electronic Hamiltonian for curvilinear coordinates using dynamical symmetry. Here, we present fitted surfaces in the form of a generalised vibronic-coupling Hamiltonian model for two nuclear coordinates, CC bond stretching and torsion. Dynamic electron correlation is included into the electronic structure to improve the energetics of the Rydberg states at the multireference configuration interaction level of theory. The chemical interpretation of the adiabatic states of interest does not change qualitatively, which validates our choice of underlying quasidiabatic states in the model. The absorption spectrum is calculated with quantum dynamics and partially assigned. This first two-dimensional model shows a surprisingly good agreement with the experimental spectrum.     

Lamellarins as Inhibitors of P‐Glycoprotein‐Mediated Multidrug Resistance in a Human Colon Cancer Cell Line

Chemical analysis of a Didemnum sp. (CMB‐01656) collected during scientific Scuba operations off Wasp Island, New South Wales, yielded five new lamellarins A1 ( 1 ), A2 ( 2 ), A3 ( 3 ), A4 ( 4 ) and A5 ( 5 ) and eight known lamellarins C ( 6 ), E ( 7 ), K ( 8 ), M ( 9 ), S ( 10 ), T ( 11 ), X ( 12 ) and χ ( 13 ). Analysis of a second Didemnum sp. (CMB‐02127) collected during scientific trawling operations along the Northern Rottnest Shelf, Western Australia, yielded the new lamellarin A6 ( 14 ) and two known lamellarins G ( 15 ) and Z ( 16 ). Structures were assigned to 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 on the basis of detailed spectroscopic analysis with comparison to literature data and authentic samples. Access to this unique library of natural lamellarins ( 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 ) provided a rare opportunity for structure–activity relationship (SAR) investigations, probing interactions between lamellarins and the ABC transporter efflux pump P‐glycoprotein (P‐gp) with a view to reversing multidrug resistance in a human colon cancer cell line (SW620 Ad300). These SAR studies, which were expanded to include the permethylated lamellarin derivative ( 17 ) and a series of lamellarin‐inspired synthetic coumarins ( 19 , 20 , 21 , 22 , 23 , 24 ) and isoquinolines ( 25 , 26 ), successfully revealed 17 as a promising new non‐cytotoxic P‐gp inhibitor pharmacophore.     

Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

One-dimensional quantum description of the bending vibrations of HCN/CNH for high values of the total angular momentum

For high values of the quantum number of the total angular momentum J (up to J = 20), quantum mechanical eigenstates (eigenvalues and eigenfunctions) are calculated by the method of Gatti et al. (J. Mol. Spectrosc. 181 (1997) 403) for the bending deformations of HCN and CNH. In particular, we have examined the l-type resonances in highly excited rovibrational states within the framework of a one-dimensional model, i.e. along the reaction pathway for the isomerization reaction HCN/CNH. The potential energy surface used is that of Bowman et al. (J. Chem. Phys. 99 (1993) 308).