Combustion behavior of ammonia blended with diethyl ether

Ammonia (NH₃) is recognized as a carbon-free hydrogen-carrier fuel with a high content of hydrogen atoms per unit volume. Recently, ammonia has received increasing attention as a promising alternative fuel for internal combustion engine and gas turbine applications. However, the viability of ammonia fueling future combustion devices has several barriers to overcome. To overcome the challenge of its low reactivity, it is proposed to blend it with a high-reactivity fuel. In this work, we have investigated the combustion characteristics of ammonia/diethyl ether (NH₃/DEE) blends using a rapid compression machine (RCM) and a constant volume spherical reactor (CVSR). Ignition delay times (IDTs) of NH₃/DEE blends were measured using the RCM over a temperature range of 620 to 942 K, pressures near 20 and 40 bar, equivalence ratios (Φ) of 1 and 0.5, and a range of mole fractions of DEE, χ_DEE, from 0.05 to 0.2 (DEE/NH₃ = 5 – 20%). Laminar burning velocities of NH₃/DEE premixed flames were measured using the CVSR at 298 K, 1 bar, Φ of 0.9 to 1.3, and χ_DEE from 0.1 to 0.4. Our results indicate that DEE promotes the reactivity of fuel blends resulting in significant shortening of the ignition delay times of ammonia under RCM conditions. IDTs expectedly exhibited strong dependence on pressure and equivalence ratio for a given blend. Laminar burning velocity was found to increase with increasing fraction of DEE. The burnt gas Markstein length increased with equivalence ratio for χ_DEE = 0.1 as seen in NH₃-air flames, while the opposite evolution of Markstein length was observed with Φ for 0.1 < χ_DEE ≤ 0.4, as observed in isooctane-air flames. A detailed chemical kinetics model was assembled to analyze and understand the combustion characteristics of NH₃/DEE blends.     

Autoignition in stratified mixtures for pressure gain combustion

The reliable generation of quasi-homogeneous autoignition inside a combustor fed by a continuous air flow would represent a milestone in realizing pressure gain combustion in gas turbines. In this work, the ignition distribution inside a stratified fuel–air mixture is analyzed. The ability of precise and reproducible injection of a desired fuel profile inside a convecting air flow is verified by applying tunable diode laser absorption spectroscopy in non-reacting measurements. High-speed, static pressure sensors and ionization probes allow for simultaneous detection of the flame and pressure rise at several axial positions in reactive measurements with dimethyl ether as fuel. A second, exchangeable combustion tube enables optical observation of OH* intensity in combination with pressure measurements. Experiments with three arbitrary fuel profiles show a set of ignition distributions that vary in shape, homogeneity, and the number of simultaneous autoignition events. Although the measurements show notable variation, a significant and reproducible influence of the fuel injection on the ignition distribution is observed. Results show that uniform autoignition leads to a coupling of the reaction front with the pressure rise and, therefore, induces a greater aerodynamic constraint than non-uniform ignition distributions, which are dominated by propagating deflagration fronts.     

Die Chemie des Reifens

The optimization of target conflicts between the various tire properties dominates the development of modern vehicle tires. Therefore, the tire became a very complex high‐tech‐product. Every single step is a very challenging process, starting with the raw materials and their mixing, going on to the shaping of the singe parts and finishing with the building of the uncured tire and the vulcanization. A very important raw material is the natural rubber. As it is a natural product, it has some special chemical and physical properties which need some special attention during the processing.     

Set Voronoi diagrams of 3D assemblies of aspherical particles

Abstract

Several approaches to quantitative local structure characterization for particulate assemblies, such as structural glasses or jammed packings, use the partition of space provided by the Voronoi diagram. The conventional construction for spherical mono-disperse particles, by which the Voronoi cell of a particle is that of its centre point, cannot be applied to configurations of aspherical or polydisperse particles. Here, we discuss the construction of a Set Voronoi diagram for configurations of aspherical particles in three-dimensional space. The Set Voronoi cell of a given particle is composed of all points in space that are closer to the surface (as opposed to the centre) of the given particle than to the surface of any other; this definition reduces to the conventional Voronoi diagram for the case of mono-disperse spheres. An algorithm for the computation of the Set Voronoi diagram for convex particles is described, as a special case of a Voronoi-based medial axis algorithm, based on a triangulation of the particles’ bounding surfaces. This algorithm is further improved by a pre-processing step based on morphological erosion, which improves the quality of the approximation and circumvents the problems associated with small degrees of particle–particle overlap that may be caused by experimental noise or soft potentials. As an application, preliminary data for the volume distribution of disordered packings of mono-disperse oblate ellipsoids, obtained from tomographic imaging, is computed.     

Copper Bismuth Chalcogenide Halogenides with Extensively Disordered and Mobile Copper(I) Cations

A new family of quaternary phases with the general sum formula Cu_3+δBi_5–δSe_8–2δX_2+2δ (X = Cl, Br) was discovered by slow cooling of high temperature melts. Cu_3.58(1)Bi_4.42(1)Se_6.84(2)Cl_3.16(2) (δ = 0.58) and Cu_4.52(1)Bi_3.48(1)Se_4.96(2)Br_5.04(2) (δ = 1.52) crystallize isostructural in the orthorhombic space group type Pnnm with a = 1332.3(1)/1340.2(3) pm, b = 1683.7(2)/1717.2(1) pm, and c = 406.2(1)/407.1(2) pm. The new structure type resembles in some aspects the hollandite as well as the pavonite type. A framework of face‐ and edge‐sharing anion polyhedra around Bi³⁺ cations hosts Cu⁺ cations. The characteristic motif is an infinite band of polyhedra that has the width of five polyhedra, with three octahedra being enclosed by capped trigonal prisms. The octahedrally coordinated Bi³⁺ cations are partially substituted by Cu⁺ (in octahedra faces), while Se^2– anions are replaced by X^–. The sulfide iodide Cu_3.33(2)Bi₂S_3.33(2)I_2.67(2) crystallizes in the monoclinic space group C2/m with a = 2803.6(9) pm, b = 409.9(1) pm, c = 1058.0(3) pm, and β = 110.68(2)°. Double strands of face‐sharing [BiS_1/1S_2/2I_4/4] as well as [BiS_3/3I_2/2(S_0.33/I_0.67)_2/2] polyhedra run along [010]. In between them, the Cu⁺ cations are spread over numerous closely spaced sites. They define a ladder‐shaped continuous path for ion conduction along [010].     

Manganese-Catalyzed Sustainable Synthesis of Pyrroles from Alcohols and Amino Alcohols

The development of reactions that convert alcohols into important chemical compounds saves our fossil carbon resources as alcohols can be obtained from indigestible biomass such as lignocellulose. The conservation of our rare noble metals is of similar importance, and their replacement by abundantly available transition metals, such as Mn, Fe, or Co (base or nonprecious metals), in key technologies such as catalysis is a promising option. Herein, we report on the first base-metal-catalyzed synthesis of pyrroles from alcohols and amino alcohols. The most efficient catalysts are Mn complexes stabilized by PN₅P ligands whereas related Fe and Co complexes are inactive. The reaction proceeds under mild conditions at catalyst loadings as low as 0.5 mol %, and has a broad scope and attractive functional-group tolerance. These findings may inspire others to use Mn catalysts to replace Ir or Ru complexes in challenging dehydrogenation reactions.     

Correction to: Exact distributional analysis of online algorithms with lookahead

4OR - A Correction to this paper has beed published: 10.1007/s10288-020-00442-1     

Optical,structural, and photoelectrochemical properties of nanostructured ln-doped ZnO via electrodepositing method

Indium-doped zinc oxide nanorods were electrochemically deposited at low temperature on ITO substrates. The synthesized ZnO-arrayed layers were investigated by using X-ray diffraction, scanning electron microscopy, UV–vis transmittance, electrochemical impedance spectroscopy, and photocurrent spectroscopy. X-ray diffraction analysis demonstrates that the electrodeposited films are crystalline and present the hexagonal Würtzite ZnO phase with preferential (002) orientation. The ZnO films obtained forms aligned hexagonal nanorods, and depending on the increasing In concentration, the surface morphologies of the films are changed. The ln-doped ZnO nanorods (NRs) are well-aligned with the c-axis being perpendicular to the substrates when the ln concentration was between 0 and 2 at.%. of In, the grown films with In contents up to 4 at.%, changes in the optical band gap from 3.31 to 3.39 eV, and the blue shift in the band gap energy was attributed to the Burstein–Moss effect. The effect of In concentration on the photocurrent generated by films shows that the obtained thin films can be used as a photovoltaic material. Changes in the photocurrent response and the electronic disorder were also discussed in the light of In doping. It was found that the carrier density of IZO thin films varied between 1.06?×?10¹⁸ and 1.88?×?10¹⁸ cm^?3 when the In concentration was between 0 and 4 at.%.

Open image in new window

Graphical Abstract Photocurrent response of IZO samples