Characterization of antithrombin III from human plasma by two-dimensional gel electrophoresis and capillary electrophoretic methods

The isoforms distribution of the glycoprotein antithrombin III (ATIII) derived from human plasma was investigated by means of isoelectric focusing (IEF) in polyacrylamide gels with immobilized pH gradients (IPG) and two-dimensional gel electrophoresis (2-DE) as well as capillary electrophoretic methods. It turned out that the presence of high concentrations of chaotropics (urea, thiourea) and zwitterionic detergents (3-[(3-cholamidepropyl)dimethylammonio]-1-propanesulfonate (CHAPS)) was decisive for attaining good resolution of the protein isoforms. Resolution by IPG-IEF was obtained with excellent reproducibility and pI differences down to 0.01 pH units could be distinguished. ATIII-alpha and ATIII-beta-fractions preseparated by heparin affinity chromatography showed an analogous but shifted spot pattern consisting each of one major and three minor isoforms. The main isoforms of ATIII-alpha and ATIII-beta exhibit pI values of 5.18 and 5.32, respectively, both values determined in the presence of high concentrations of urea. The pI difference of 0.14 pH units correspond to the effect of two sialic acids absent in ATIII-beta. The formation and occurrence of ATIII dimers and trimers turned out to be dependent on the sample preparation. The results obtained by 2-DE were compared with those of capillary zone electrophoresis (CZE) and capillary IEF (CIEF). Quantitative analysis regarding the CZE separated isoforms of plasma derived ATIII yielded a content of about 70% ATIII-alpha main isoform and about 6.6% of ATIII-beta. The pI values of ATIII determined by CIEF with internal calibration were in fair agreement with the pI values of the main isoforms achieved with 2-DE.     

Highly substituted azulene dyes as multifunctional NLO and electron-transfer compounds

Two highly substituted azulene derivatives were synthesised by Pd-mediated dimerisation from the corresponding tolan species. One azulene derivative (2) has donor functionalities (dianisylaminophenyl and dianisylamino) in the 1-, 2-, 3- and 6-positions, while the other (1) has donors (dianisylaminophenyl) in the 2- and 6-positions and acceptors (nitrophenyl) in the 1- and 3-positions. Each azulene derivative shows strong bond length alternation in the solid state, determined by X-ray crystal analysis, and an intense CT band around 450-500 nm in its UV/Vis spectrum. The first-order hyperpolarisability of 1 and of 2 was measured by hyper-Rayleigh scattering and is about that of disperse red DR1. Both azulene derivatives show multiple oxidation processes. The intramolecular adiabatic ET behaviour of the mixed valence radical cations of 1 and of 2 was investigated by UV/Vis/NIR spectroelectrochemistry. The intervalence-CT band of 1(+) could be analysed by the Generalised Mulliken-Hush theory, which yields an electronic coupling V=1140 cm(-1) for the optically induced adiabatic hole transfer.     

The conformation of amine- and amide-terminated poly(propylene imine) dendrimers as investigated by molecular simulation methods

The parameters that influence the conformation of poly(propylene imine) dendrimers were investigated by molecular simulations using molecular mechanics and simulated annealing methods. Dendrimers with two types of peripheral units able to communicate via hydrogen bonding-amine and amide moieties-were considered in order to study the role that secondary interactions among the end groups have in the spatial organization of the dendritic branches. Radial atomic density profiles and radial atomic probability distributions were used to extract global properties, such as the degree of packing of the branches, the distribution of the monomers throughout the molecular volume, and the extent and characteristics of the surface region. Information was also obtained about the nature, location, and extent of formation of the hydrogen bonds, as well as their evolution with dendrimer generation and their assembly into networks. The analyses were supported by a detailed investigation of the first two generations, with an emphasis on the relationship between hydrogen bonding and the compactness and stability of the molecules; this allowed us to account for the generational evolution of hydrogen bonding that is experimentally observed in several poly(propylene imine) dendrimers.     

Complete 1H and 13C NMR assignments for two new monodesmoside saponins from Pentaclethra macroloba (Willd.) Kuntze

A detailed NMR study and full assignments of the 1H and 13C spectral data for two novel triterpenoid saponins isolated from the stem bark of Pentaclethra macroloba (Willd.) Kuntze are described. Their structures were established using a combination of 1D and 2D NMR techniques including 1H,1H-COSY, TOCSY, NOESY, gs-HMQC and gs-HMBC, and also electrospray ionization mass spectrometry and chemical methods. The structures were established as 3beta-O-([O-beta-D-glucopyranosyl-(1-->2)-O-beta-D-glucopyranosyl-(1-->4)-O-beta-D-glucopyranosyl-(1-->3)-O-alpha-L-rhamnopyranosyl-(1-->2)]-[O-beta-D-glucopyranosyl-(1-->3)-O-beta-D-glucopyranosyl-(1-->4)])-alpha-L-arabinopyranosylhederagenin (1) and 3beta-O-)[O-beta-D-glucopyranosyl-(1-->2)-O-beta-D-glucopyranosyl-(1-->4)-O-beta-D-glucopyranosyl-(1-->3)-O-alpha-L-rhamnopyranosyl-(1-->2)]-[O-beta-D-glucopyranosyl-(1-->3)-O-beta-D-glucopyranosyl-(1-->4)])-alpha-L-arabinopyranosyloleanolic acid (2).     

HPLC Method for Determination of Rosiglitazone in Plasma

A fast and sensitive high performance liquid chromatography method for quantitative determination of rosiglitazone in human plasma has been developed. The extraction from plasma was performed using solid-phase extraction (SPE) on C4 silica (100 mg) disposable extraction cartridges (DEC). The separation of rosiglitazone and two metabolites was achieved on a Phenomenex® Synergi 4 µm MAX-RP (150 × 4.6 mm) column, protected by a guard column. The mobile phase was 0.01 M ammonium acetate, pH 7.0 - acetonitrile (65:35, v/v). (3S)-3-OH-quinidine was used as internal standard. The analytes were detected using fluorescence detection. The method was validated. The limit of quantitation was 1 ng mL⁻¹ and the detection limit was 0.25 ng mL⁻¹ for rosiglitazone in human plasma. The recovery was 90% for rosiglitazone. Linearity was observed over a range of 1-1000 ng mL⁻¹ (r²=0.9959). The intra- and inter-day precision (C.V.) did not exceed 8.7 %. Applicability of the method was demonstrated by a clinical pharmacokinetic study. A healthy volunteer received in two separate phases 4 mg and 8 mg rosiglitazone maleate as a single oral dose. Plasma concentrations were measured for 24 h in both phases.     

On the reaction of dithiocarbamates with nitrogen-containing derivates of oxalic acid

Summary The action of bisimidochlorides of oxalic acid on dithiocarbamates produces 2-thioxo-3-aryl(alkyl)-4,5-diiminothiazolidines by cycloacylation. The molecular structure of 2-thioxo-3-(4-methoxyphenyl)-4,5-bis(phenylimino)-thiazolidine is confirmed by X-ray crystal structure analysis.

---

Zur Reaktion von Dithiocarbaminaten mit stickstoffhaltigen Derivaten der Oxalsäure

Zusammenfassung Bei der Einwirkung von Bisimidchloriden der Oxalsäure auf Dithiocarbaminate entstehen durch Cycloacylierung 2-Thioxo-3-aryl(alkyl)-4,5-diiminothiazolidine. Die Molekülstruktur von 2-Thioxo-3-(4-methoxyphenyl)-4,5-bis(phenylimino)thiazolidin wird durch Röntgenkristallstrukturanalyse bestätigt.

     

Allylic interactions in organometallics: probing Electronic structure in (η5-C5H5)Fe(CO)2R,R = CH3, η1-C3H5, η1-C5H5.

The He(I) photoelectron spectra of (η⁵-C₅H₅)Fe(CO)₂R, where R = CH₃, η¹-C₃H₅ and η¹-C₅H₅, have been recorded. The lowest lying ion states result from ionization of molecular orbitals with large Fe 3d character; these move to lower anergy when R places double bonds in an allylic relationship to the metal atom. The cyclic voltammetric oxidation potential correlates well with the energies of the lowest ion states. A significant interaction between olefin π orbitals and the allylic metal center is proposed.     

Synthesis of lead magnesium niobate and La-modified lead magnesium niobate using different Mg precursors

Summary In the present study, the effect of the partial replacement of Pb²⁺ by La³⁺ in the lead magnesium niobate Pb(Mg_1/3Nb_2/3)O₃ (PMN) perovskite structure was examined, taking into account the Mg-source. Pure lead magnesium niobate (PMN) and lanthanum-modified lead magnesium niobate (PLMN) having composition (Pb_1-xLa_x) (Mg_1+x/3Nb_2-x/3)O₃ with x=0.2 were elaborated. The phase formation was investigated by DTA/TG methods correlated with X-ray diffraction, performed on materials obtained in non-isothermal conditions. The diffraction data for the ceramics obtained by isothermal treatments emphasized the influence of the lanthanum on the crystal structure, inducing the doubling of the unit cell parameter. SEM investigations pointed out the lanthanum inhibitor effect on the grain growth process, leading to an uniform grain distribution.     

Investigation of the NMR enhancement factor in CuMn spin glasses

The NMR enhancement factor of a frozenCuMn spin glass has been measured at a temperatureT?T _g /5. The measurements were performed as function of static magnetic fields of different directions. A two component model of a spin glass has been outlined. One component being a “system of single spins” and the other one being a “subsystem of clusters”. Both components were attributed to different kinds of interaction being RKKY and dipole interaction respectively. The effective anisotropy field of the single spin system consists of two unidirectional contributionsH _a ^s andH _a ^c , which have been measured for different conditions. A second anisotropy fieldH _d binds the cluster system to the system of single spins. All anisotropy fields depend on the annealing temperature of the alloys.     

Synthesis and modification of terrylenediimides as high-performance fluorescent dyes

Two new synthetic approaches to terrylenediimides, highly photostable fluorescent dyes, are described. For the first time terrylenediimide has been synthesised in a straightforward procedure that makes large quantities available. The second route includes an efficient cross-coupling reaction followed by a cyclodehydrogenation. Monofunctionalisation of the imide structure allows terrylenediimides now to be coupled with a variety of compounds, for example, by Suzuki cross-coupling, which can lead to an array of terrylenediimides with new functional groups such as hydroxy, amino, or carboxy groups needed to link up with other molecules. The functionalisation in the bay region is used to tune the properties of terrylenediimides and extend the range of applications, for example, by introducing water solubility. These tetrasubstituted terrylenediimides offer, depending on the substituents used, exciting features such as good solubility in common organic solvents, water solubility, or NIR absorption.