A General Pathway to Heterobimetallic Triple-Decker Complexes

A systematic study on the reactivity of the triple-decker complex [(Cp’’’Co)₂(μ,η⁴:η⁴-C₇H₈)] ( A ) (Cp’’’=1,2,4-tritertbutyl-cyclopentadienyl) towards sandwich complexes containing cyclo-P₃, cyclo-P₄, and cyclo-P₅ ligands under mild conditions is presented. The heterobimetallic triple-decker sandwich complexes [(Cp*Fe)(Cp’’’Co)(μ,η⁵:η⁴-P₅)] ( 1 ) and [(Cp’’’Co)(Cp’’’Ni)(μ,η³:η³-P₃)] ( 3 ) (Cp*=1,2,3,4,5-pentamethylcyclopentadienyl) were synthesized and fully characterized. In solution, these complexes exhibit a unique fluxional behavior, which was investigated by variable temperature NMR spectroscopy. The dynamic processes can be blocked by coordination to {W(CO)₅} fragments, leading to the complexes [(Cp*Fe)(Cp’’’Co)(μ₃,η⁵:η⁴:η¹-P₅){W(CO)₅}] ( 2 a ), [(Cp*Fe)(Cp’’’Co)(μ₄,η⁵:η⁴:η¹:η¹-P₅){(W(CO)₅)₂}] ( 2 b ), and [(Cp’’’Co)(Cp’’’Ni)(μ₃,η³:η²:η¹-P₃){W(CO)₅}] ( 4 ), respectively. The thermolysis of 3 leads to the tetrahedrane complex [(Cp’’’Ni)₂(μ,η²:η²-P₂)] ( 5 ). All compounds were fully characterized using single-crystal X-ray structure analysis, NMR spectroscopy, mass spectrometry, and elemental analysis.     

Atropisomers of meso Tetra(N-Mesyl Pyrrol-2-yl) Porphyrins: Synthesis,Isolation and Characterization of All-Pyrrolic Porphyrins

Atropisomerism has been observed in a variety of biaryl compounds and meso-aryl substituted porphyrins. However, in porphyrins, this phenomenon had been shown only with o-substituted 6-membered aromatic groups at the meso-position. We show herein that a 5-membered heteroaromatic (N-mesyl-pyrrol-2-yl) group at the meso-position leads to atropisomerism. In addition, we report a ‘one-pot’ synthetic route for the synthesis of ‘all-pyrrolic’ porphyrin (APP) with several N-protection groups (Boc, Cbz, Ms and Ts). Among these groups, we found that only the Ms group gave four individually separable atropisomers of meso-tetra(N-Ms-pyrrol-2-yl) porphyrin. Furthermore, the reductive removal of Cbz- was achieved to obtain meso-tetra(pyrrol-2-yl) porphyrin. Thus, our synthetic procedure provides an easy access to a group of APPs and stable atropisomers, which is expected to expand the application of novel APP-based materials.     

Density functional calculations on Jahn-Teller effect of tetrachloromethane cation

Density functional (DF) calculations of the tetrachloromethane cation and its most important competitive process, the formation of CCl⁺₃, were carried out to explain the possible stability of CCl⁺₄. From results obtained with B-LYP and B-P86 methods, it is possible to produce a slight Jahn-Teller (JT) effect for a C_s planar structure of the cation type CCl₂(SINGLE BOND)Cl(SINGLE BOND)Cl⁺ compatible with the experimental data obtained by electron-spin resonance spectroscopy. A complex of C_3v structure CCl⁺₃(SINGLE BOND)Cl which is similar to the previous one found in CF⁺₄ appears when symmetry-broken wave functions are used in HF-LYP and HF-P86 methods. Depending of the DF method employed, either one of the minima [C_s (planar) and C_3v] is the most stable and competes with the dissociation of the molecular ion to give CCl⁺₃. The JT stabilization energy is smaller when the JT active coordinates are considered. © 1997 John Wiley & Sons, Inc.     

Golden crowns: cation binding by macrocyclic gold(I) crown ether derivatives

The polyether bis(alkynes) α,ω-bis(O-propargyl)triethylene glycol and α,ω-bis(O-4-propargyloxyphenoxy)triethylene glycol reacted with [AuCl(SMe₂)] in the presence of base to form the corresponding oligomeric gold(I) acetylide complexes (AuCCCH₂O(CH₂CH₂O)₃CH₂CCAu)_n and (AuCCCH₂OC₆H₄O(CH₂CH₂O)₃C₆H₄OCH₂CCAu)_n. These digold(I) diacetylide complexes reacted with diphosphine ligands to give macrocyclic digold(I) complexes of the type [Au₂(μ-CC)(μ-PP)], where CC is the diacetylide and PP is a diphosphine ligand. These digold(I) complexes bind the cations Li⁺, Na⁺, K⁺ and Cs⁺, as studied by electrospray mass spectrometry.     

A Visible Light Photocatalytic Cross‐Dehydrogenative Coupling/Dehydrogenation/6π‐Cyclization/Oxidation Cascade: Synthesis of 12‐Nitroindoloisoquinolines from 2‐Aryltetrahydroisoquinolines

A visible light‐induced photocatalytic dehydrogenation/6π‐cyclization/oxidation cascade converts 1‐(nitromethyl)‐2‐aryl‐1,2,3,4‐tetrahydroisoquinolines into novel 12‐nitro‐substituted tetracyclic indolo[2,1‐a]isoquinoline derivatives. Various photocatalysts promote the reaction in the presence of air and a base, the most efficient being 1‐aminoanthraquinone in combination with K₃PO₄. Further, the 12‐nitroindoloisoquinoline products can be accessed directly from C1‐unfunctionalized 2‐aryl‐1,2,3,4‐tetrahydroisoquinolines by extending the one‐pot protocol with a foregoing photocatalytic cross‐dehydrogenative coupling reaction, resulting in a quadruple cascade transformation.     

Absolute configuration in 4-alkyl- and 4-aryl-3,4-dihydro-2(1H)-pyrimidones: a combined theoretical and experimental investigation

Structural features (orientation of the carboxyl group, ring puckering), electronic absorption, and circular dichroism spectra of 4-alkyl- and 4-aryl-dihydropyrimidones 1-5 are calculated by semiempirical (AM1, INDO/S), ab initio (HF/6-31G, CIS/6-31G, RPA/6-31G), and density functional theory (B3LYP/6-31G) methods. These calculations allow an assignment of the absolute configuration by comparison of simulated and experimental CD spectra. Although the ab initio methods greatly overestimate electronic transition energies, the general appearance of the experimental CD spectra is quite nicely reproduced by these calculations. Thus, comparison of experimental with calculated CD spectra is a reliable tool for the assignment of the absolute configuration. For 4-methyl derivatives 1, the first enantiopure DHPM examples with no additional aromatic substituent, the stereochemistry at C4 provided by the theoretical results is confirmed by X-ray structure determination of the diastereomeric salt 6. Additional support is the consistent HPLC elution order found for all investigated DHPMs on a cellulose-derived chiral stationary phase.     

Switching the Mechanism of NADH Photooxidation by Supramolecular Interactions

A series of three Ru(II) polypyridine complexes was investigated for the selective photocatalytic oxidation of NAD(P)H to NAD(P)⁺ in water. A combination of (time-resolved) spectroscopic studies and photocatalysis experiments revealed that ligand design can be used to control the mechanism of the photooxidation: For prototypical Ru(II) complexes a ¹O₂ pathway was found. Rudppz ([(tbbpy)₂Ru(dppz)]Cl₂, tbbpy=4,4'-di-tert-butyl-2,2'-bipyridine, dppz=dipyrido[3,2-a:2′,3′-c]phenazine), instead, initiated the cofactor oxidation by electron transfer from NAD(P)H enabled by supramolecular binding between substrate and catalyst. Expulsion of the photoproduct NAD(P)⁺ from the supramolecular binding site in Rudppz allowed very efficient turnover. Therefore, Rudppz permits repetitive selective assembly and oxidative conversion of reduced naturally occurring nicotinamides by recognizing the redox state of the cofactor under formation of H₂O₂ as additional product. This photocatalytic process can fuel discontinuous photobiocatalysis.     

Ab initio and density functional theory studies on the mechanism of nucleophilic vinylic substitution of 4<Emphasis Type="Italic">H</Emphasis>-pyran-4-one and 2-methyl-4<Emphasis Type="Italic">H</Emphasis>-pyran-4-one with ammonia

 Nucleophilic vinylic substitutions of 4H-pyran-4-one and 2-methyl-4H-pyran-4-one with ammonia were calculated by the B3LYP method using the 6-31G(d,p) basis set. Bulk solvent effects of aqueous solution were estimated by the polarized continuum and Poisson–Boltzmann self-consistent reaction field models using the 6-311+G(d,p) basis set. In the gas phase different mechanisms were found for the two reaction systems calculated. The reaction of 4H-pyran-4-one proceeds through enol, whereas a feasible path for the less reactive 2-methyl-4H-pyran-4-one is the mechanism through a keto intermediate. Addition of ammonia in concert with proton transfer is the rate-determining step ofthe reaction. The mechanism proceeding either by a bimolecular nucleophilic substitution (S_N2) or by one involving a tetrahedral zwitterionic intermediate is shown to be unlikely in the gas phase or nonpolar solution. The effects of bulk solvent not only consist in a reduction of the various activation barriers by about 25–40 kJ mol⁻¹ but also in a change in the reaction mechanism. Received 26 May 2002 / Accepted 26 July 2002 / Published online: 14 February 2003     

Electrogenerated chemiluminescence of conjugated polymer films from patterned electrodes

A new phenomenon is presented in which electrogenerated chemiluminescence (ECL) is generated and propagates laterally as self-reinforcing waves as a result of the oxidation of a poly(9,9-dioctylfluorene-co-benzothiadiazole) thin film. In an ordered array of Au electrode posts that act as effective ECL nucleation sites, soliton-like waves were observed to expand from each site and annihilate upon collision with each other. Simulations of the ECL response supported the experimental observations that the ECL waves propagate at a constant speed. A correlated diffusion mechanism involving the correlated motion of ions, injected holes, and solvent molecules is proposed to interpret the experimental data qualitatively. A rapid increase in the diffusion coefficient of these species in the polymer results in a sharp interface between non-oxidized and oxidized polymer phases wherein the electrochemical (EC) oxidation and mass transport of all pertinent species take place. EC oxidation of conjugated polymers of this type has important implications for the understanding of these materials and their modes of operation in EC conjugated polymer devices.     

Detailed investigations of ZnO photoelectrodes preparation for dye sensitized solar cells

Wurtzite ZnO hexagonal nanopyramids were successfully synthesized in the liquid phase from homogeneous methanolic solutions of zinc acetate and tetramethylammonium hydroxide at an excess of zinc ions. The formation and properties of the nanocrystals were examined as a function of synthesis conditions. No significant influence of the [Zn(2+)]/[OH(-)] ratio was noticed on the final particle size, in spite of increased amounts of OH(-) ions, which tend to accelerate the particle nucleation and growth. Nevertheless, the reactant concentration ratio influences the surface properties of the ZnO nanocrystals. Mesoporous ZnO films were prepared by doctor blading ethanolic pastes containing ZnO nanoparticles and ethyl cellulose onto FTO conductive glass substrate followed by calcination. Additionally, the influence of a plasticizer (triacetin)-used during the paste preparation-on the film quality was investigated. A higher content of ZnO nanoparticles and plasticizer in the pastes improved the film quality. Four different temperatures (i.e., 400, 425, 450, and 475 °C) were used for the film calcination and their influence on the structural properties of the films was characterized. In principle, increasing the calcination temperature goes hand in hand with an increase of particle size, as well as the pore diameter and reduction of the surface area. Suitable mesoporous films were employed as photoanodes in dye sensitized solar cells (DSSCs). In order to assess the effect of the varied parameters on complete DSSC devices-using cis-diisothiocyanato-bis(2,2'-bipyridyl-4,4'-dicarboxylato) ruthenium(II)bis(tetrabutylammonium (N719) as a sensitizer-incident photon to current efficiency (IPCE) and current voltage measurements were carried out. The IPCE measurements confirmed photoinduced electron injection from the dye, reaching IPCE values up to 76%. Furthermore, current-voltage characteristics of complete cells emphasized the importance of the proper preparation methods and temperatures. These features are important assets for the preparation of nanocrystalline ZnO based photoelectrodes and for improving the DSSC performance.