基于新型长周期光纤光栅的掺铒光纤放大器

报道了基于高频CO₂激光脉冲写入的新型长周期光纤光栅的低噪音掺铒光纤放大器,这种新型长周期光纤光栅是用大约几千Hz的高频CO₂激光脉冲对光纤玻璃热冲击作用而形成的.在铒纤中插入一个长周期光纤光栅,会明显减少掺铒光纤放大器的放大自发辐射(ASE)噪音.报道了两种低噪音掺铒光纤放大器,作为前置放大器和线路放大器,它们的ASE噪音指数分别从4.0 dB减少到3.5 dB和从4.8 dB减少到4.3 dB,并且在作为线放时,其小信号增益从30 dB提高到37 dB,降噪及提高增益效应十分显著.     

风冷热泵冷热水机组动态过程仿真

本文给出了风冷热泵冷热水机组动态过程模型。系统的高、低压段被分成制冷剂侧、管壁、以及水或空气侧三个控制容积。针对每个控制容积建立了质量和能量平衡的微分方程。由于压缩机、热力膨胀阀阀体、以及四通换向阀具有较小的热惯性,因而采用稳态模型描述压缩过程、膨胀过程、以及内泄露过程。膨胀阀感温包中的制冷剂温度对于蒸发器出口温度的延迟用一阶惯性环节来描述。通过“预测-校正”和“自适应步长”方法实现系统仿真。仿真结果与测试数据吻合良好。     

High performance 1689-nm quantum well diode lasers

1689-nm diode lasers used in medical apparatus have been fabricated and characterized. The lasers had pnpn InP current confinement structure, and the active region consisted of 5 pairs of InGaAs quantum wells and InGaAsP barriers.     

Numerical study of simultaneous natural convection heat transfer from both surfaces of a uniformly heated thin plate with arbitrary inclination

 Numerical studies were conducted to investigate the natural convection heat transfer around a uniformly heated thin plate with arbitrary inclination in an infinite space. The numerical approach was based on the finite volume technique with a nonstaggered grid arrangement. For handling the pressure–velocity coupling the SIMPLE-algorithm was used. QUICK scheme and first order upwind scheme were employed for discretization of the momentum and energy convective terms respectively. Plate width and heating rate were used to vary the modified Rayleigh number over the range of 4.8×10⁶ to 1.87×10⁸. Local and average heat transfer characteristics were compared with regarding to the inclination angle. The empirical expressions for local and average Nusselt number were correlated. It has been found that for inclination angle less than 10^∘, the flow and heat transfer characteristics are complicated and the average Nusselt number can not be correlated by one equation while for inclination angle larger than 10^∘, the average Nusselt number can be correlated into an elegant correlation. Received on 18 April 2001 / Published online: 29 November 2001     

高温高密度Z-pinch等离子体自适应式平面丝阵负载制备技术研究

 在Z-pinch实验中，加速器两电极间距会因抽真空而发生改变从而导致平面丝阵负载的丝分布发生变化，为了解决这个问题，采用弹簧预压缩的方法，制备出了平面丝阵负载，经实验室模拟检测和物理实验的实际应用证明，平面丝阵负载不但能适应电极方向呈任何方向放置的靶室，还能自动适应靶室电极间距因抽真空而发生的变化。在实验过程中丝阵可以保持绷紧的状态，满足了物理实验的要求。     

复方单硝酸异山梨酯-阿司匹林双缓释微丸胶囊的研制(Ⅱ)

以乙基纤维素、丙烯酸树脂Ⅱ和丙烯酸树脂Ⅲ为骨架材料分别制备单硝酸异山梨酯和阿司匹林混合骨架缓释微丸，并通过包薄膜衣进一步控制药物的释放。通过测定微丸的释放度对处方工艺进行评价，选择最佳微丸灌装胶囊．胶囊中两种药物均达到良好的缓释效果。符合中国药典对缓释制剂的要求．其体外释放过程同时符合Higuchi方程和一级释药方程，R^2值均在0．995以上。     

Cr^4＋：YAG,Cr^4＋：Mg2SiO4近红外荧光辐射温度特性研究

测量了Ｃｒ＾４＋，ＹＡＧ、Ｃｒ＾４＋，Ｍｇ２ＳｉＯ４晶体在室温和液氮温度下的荧光光谱，吸收光谱和激发态寿命，讨论了温度变化时，两种晶体中Ｃｒ＾４＋近红外辐射积分强度变化与激光发态寿命变化的关系，得出结论：在７７Ｋ￣３００Ｋ范围内，Ｃｒ＾４＋的＾３Ｔ２能级荧光辐射截面本身受温度影响不大，Ｃｒ＾４＋辐射荧光的变化，主要是由无辐射弛豫速率随温度变化而引起的。     

准直孔法改善束流品质初探

本文提出了用准直孔结合调节束流导引磁场获得较好品质强流电子束的方法,运用该方法在1.5MeV直线感应加速器(LIA)进行了试验,结果准直束流前后沿明显减小,束亮度提高几倍;同时,用此方法测出了束密度及束亮度的径向分布.     

CLIFFORD MARTINGALES Φ-EQUIVALENCE BETWEEN S（f） AND f^＊

ＣＬＩＦＦＯＲＤＭＡＲＴＩＮＧＡＬＥＳΦ－ＥＱＵＩＶＡＬＥＮＣＥＢＥＴＷＥＥＮＳ（ｆ）ＡＮＤｆ￥ＬＯＮＧＲＵＬＩＮ；ＱＩＡＮＴＡＯ（ＩｎｓｔｉｔｕｔｅｏｆＭａｔｈｅｍａｔｉｃｓ，ＡｃａｄｅｍｉａＳｉｎｉｃａ，Ｂｅｉｊｉｎｇ１０００８０，Ｃｈｉｎａ．）...     

斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。