强流射频四极加速器输入耦合环的物理设计研究

 详细讨论了强流射频四极加速器高频输入耦合环的一些基本问题，完成了高频输入耦合环的初步物理设计. 利用二维程序Superfish 的一些结果，确定了耦合环的大小，计算了耦合环的功耗，并对构成耦合环导线的粗细进行了估算。该耦合环的物理设计可作为耦合环试验的基础，同时，也可作为三维程序HFSS 模拟计算的起点。     

Economic scheme for remote preparation of an arbitrary five-qubit Brown-type state

A scheme for remotely preparingan arbitrary five-qubit Brown state by using three three-qubit GHZ states as the quantum channel is proposed. It is shown that, after the sender performs two different three-qubit projective measurements, the receiver should introduce two auxiliary qubits and employ suitable C-NOT gates, Toffoli gate and unitary operations on his qubits, the original state can be recovered with unit probability. Compared with the previous scheme, the advantage of the present scheme is that the entanglement resource can be reduced.     

硝酸甘油:祸兮福所倚,福兮祸所伏——舞台剧剧本

自1846年硝酸甘油被合成以来,人们一直把其当作炸药来使用。但由于硝酸甘油过于敏感,导致事故不断。为解决这一问题,诺贝尔尝试改良硝酸甘油,将硅藻土与硝酸甘油混合,降低了敏感度,达到安全使用炸药的目的。后来人们发现硝酸甘油还有缓解心绞痛的功能,便对其进行了深入研究。本文以剧本的形式向大众科普硝酸甘油的上述功能。     

环路跟踪卡尔曼滤波算法的性能分析

基于卡尔曼滤波的环路跟踪算法多是通过一定仿真证明算法性能,没有系统性性能评估,难以较好指导工程应用。在原有算法基础上进行了优化,并系统性地对比分析、评估了基于卡尔曼环路滤波算法性能,以期为算法工程化提供指导。首先提出对跟踪环路反馈调整量进行预测,使之更符合系统实际,减小环路跟踪误差。而后基于卫星信号模拟器输出信号和自生产信号源,充分评估基于卡尔曼滤波环路跟踪算法的收敛时间和灵敏度。仿真结果表明,相比目前工程常用的二阶FFL辅助三阶PLL算法,基于卡尔曼滤波环路跟踪算法能够缩短环路所需稳定时间约90%,并能提升跟踪灵敏度约5 d B,有效改善弱信号场景中接收机输出信息的完好性和连续性。     

船载特种设备基点轨迹测量的误差分析

对船载特种设备基准点的空间位置进行测量,得到该基准点的运动轨迹并进行测量误差分析,是某项工程数据处理的重要内容.提出了利用三台船载GPS接收机测量船载特种设备基准点的原理和误差分析方法,介绍了该方法的误差源构成,依据测量原理模型,推导出定位精度的估算公式,并叙述了仿真计算与测量实施.     

方差可能无穷的“中度偏离”单位根过程的复合分位数估计

考虑一类"中度偏离"单位根过程,y_t=q_ny_t-1+u_t,其中qn=1+c/(k_n),k_n=o(n),c为一非零常数,{u_t}为随机扰动项序列.在允许扰动项方差无穷的条件下,构造q_n的复合分位数估计,并得到了该估计的渐近分布.最后通过数值模拟,在扰动项服从t(2)分布下,说明了该估计的稳健和有效性.     

Dynamic analysis on generalized linear elastic body subjected to large scale rigid rotations

The dynamic analysis of a generalized linear elastic body undergoing large rigid rotations is investigated. The generalized linear elastic body is described in kine-matics through translational and rot...     

通过宽线固体核磁共振氢谱研究半晶高分子的相结构

宽线固体核磁共振氢谱（¹H NMR）是一种研究半晶高分子相结构的经典方法.本文以半晶聚乙烯的宽线固体¹H NMR谱为例，探讨了通过Gaussian/Sinc、Gaussian和Lorentzian函数组合对宽线固体¹H NMR谱图进行拟合的方案，并根据半晶聚乙烯的相结构成分对拟合得到的各信号成分进行归属.并在此基础上探讨了各个相结构中分子链运动与信号线型的相关性，以及利用宽线固体¹H NMR谱测量半晶高分子结晶度存在的困难.     

煤与生物质混烧灰荷电特性研究

对玉米秸分别与两种煤以不同比例混烧生成的混烧灰进行了荷电特性研究。利用法拉第杯荷电量检测系统和静电低压撞击器(ELPI)测量了混烧灰的总体荷质比及分级荷质比,并借助于成分分析及形貌分析结果讨论了其影响机理。结果表明,随着生物质掺入量在混烧燃料中的增加,混烧灰的成分组成发生变化,使得其介电常数变大,比电阻增大,表面吸附能力增强,从而使混烧灰的总体荷质比有一定的上升趋势。对混烧灰的分级荷质比测量结果表明,排除灰样粒径的影响,生物质的掺入使得混烧灰的荷电能力得以增强,但影响相对较小,颗粒粒径是影响混烧灰荷电能力的主要因素。     

Rational design of thermoelastic damping in microresonators with phase-lagging heat conduction law

The design of thermoelastic damping (TED) affected by the phase-lagging non-Fourier heat conduction effects becomes significant but challenging for enlarging the quality factor of widely-used microresonators operating in extreme situations, including ultra-high excitation frequency and ultra-low working temperature. However, there does not exist a rational method for designing the TED in the framework of non-Fourier heat conduction law. This work, therefore, proposes a design framework to achieve low thermoelastic dissipation of microresonators governed by the phase-lagging heat conduction law. The equation of motion and the heat conduction equation for phase-lagging TED microresonators are derived first, and then the non-Fourier TED design problem is proposed. A topology optimization-based rational design method is used to resolve the design problem. What is more, a two-dimensional (2D) plain-strain-based finite element method (FEM) is developed as a solver for the topology optimization process. Based on the suggested rational design technique, numerical instances with various phase lags are investigated. The results show that the proposed design method can remarkably reduce the dissipation of microresonators by tailoring their substructures.