Lagrange multiplier method used in BESⅢ

In this paper, the kinematic fitting with the Lagrange multiplier method has been studied for BESⅢ experiment. First we introduce the Lagrange multiplier method and implement kinematic constraints. Then we present the performance of the kinematic fitting algorithm. With the kinematic fitting, we can improve the resolution of track parameters and reduce the background.     

量纲分析的线性代数方法

把量纲概念与矢量空间联系起来,提出用线性代数进行量纲分析的方法,并举例说明。     

电子助进热丝化学汽相沉积金刚石薄膜

以CH₄和H₂为源反应气体，利用电子助进热丝化学汽相沉积（CVD）技术，在Si（100）晶面衬底上成功地得到了织构生长的金刚石薄膜．用扫描电子显微镜、Raman光谱、X射线衍射等多种技术对薄膜的形貌、成分、晶态等特性进行了分析，得到了在热丝CVD实验条件下织构生长金刚石薄膜的最佳工艺条件． 关键词：     

Breather Lattice Solutions to Negative mKdV Equation

In this paper, dependent and independent variable transformations are introduced to solve the negative mKdV equation systematically by using the knowledge of elliptic equation and Jacobian elliptic functions. It is shown that different kinds of solutions can be obtained to the negative mKdV equation, including breather lattice solution and periodic wave solution.     

Re-entrant-Groove-Assisted VLS Growth of Boron Carbide Five-Fold Twinned Nanowires

We report a preferential growth of boron carbide nanowires with a five-fold twinned internal structure. The nanowires are found to grow catalytically via iron boron nanoparticles, but unusually the catalytic particle is in contact with the low-energy surfaces of boron carbide with V-shaped contact lines. We propose that this catalytical growth may be caused by preferential nucleation at the re-entrant grooves due to the twinning planes, followed by rapid spreading of atomic steps. This is consistent with the observed temperature dependence of the five-fold twinned nanowire growth.     

一种改进的视觉传感器与激光测距雷达特征匹配点提取算法

激光测距雷达与视觉传感器的配准是视觉图像与激光距离信息融合的前提。激光测距雷达与视觉传感器的配准可分为点匹配与平面匹配。由于混合像素和非结构空间特征激光点丢失现象,使得基于点匹配的视觉传感器与激光测距雷达配准算法精度难以提高。通过对混合像素和非结构空间特征激光点丢失问题的分析,提出了一种结合平面建模思想,利用假想激光光束与平面模型相交提取匹配特征点的方法。验证了实验结果并进行了算法精度比较。实验结果表明,这种改进的特征匹配点提取算法解决了特征点缺失,并且提高了点匹配的精度,使匹配性能大大地改善。     

Magnetic Properties and Magnetoresistance of CdMnS：Au Based Structures Prepared by Co-evaporation

Polycrystalline CdMnS and CdMnS：Au films with hexagonal structure on Si（111） substrates are prepared by co-evaporation, and exhibit ferroelectric and ferromagnetic properties, respectively. Under optimized growth conditions, CdMnS：Au samples with an average crystallite size of 90nm and Mn concentration of 5.0at.% are obtained, and an all-semiconductor spin valve device of Co/Au/CdMnS：Au/CdMnS/Pt is fabricated. Electrical measurement of the device reveals the clear dependence of resistance on applied magnetic field, with a relative magnetoresistance of 0.06% and a switching field of 100 Oe at 77K.     

Beam energy measurement system at BEPC Ⅱ

The beam energy measurement system at BEPCII is composed of there parts: laser source and optics system,laser-electron interaction system and High Purity Germanium(HPGe)detector system.The special components and construction of each part are introduced,especially about radiation background mea-surement in the storage ring,which is of great importance for the safe commissioning of HPGe detector.     

基于形态学成分分析的静态极光图像分类算法

为了解决海量极光图像手工分类效率低下的问题,提出一种静态极光图像自动分类系统,使用形态学成分分析将极光纹理从复杂背景中分离出来,从纹理中提取特征并利用支持向量机进行分类.实验结果表明:该算法分类正确率较之于传统方法均提高约10%,当分类器支持向量机+线性核函数时,分类速度最快,最适合于海量数据的处理.     

氮气氛中高温退火对ZnO薄膜发光性质的影响

以二乙基锌和水汽分别作为锌源和氧源,用LP-MOCVD方法在p型Si(100)衬底上生长了单一取向的ZnO薄膜。对得到的样品在氮气气氛中进行高温热处理,退火温度分别为900,1000,1100℃。利用室温PL谱、XRD、AFM、XPS等方法对样品的性质进行了研究。研究表明:(1)随着退火温度的升高,样品的结晶性质也逐渐提高,从表面形貌观察到晶粒尺寸逐渐增大;(2)当退火温度从900℃升高至1000℃时,样品的光致发光谱中可见光波段的发光强度有所减弱,而紫外波段的发光强度明显增强;当退火温度升高至1100℃时,可见光波段的发光几乎完全被抑制,而紫外波段的发光强度急剧增强。分析认为,高温退火改善晶体结晶质量的同时调制了样品的Zn/O比,氮气气氛下的热处理使得样品内的氧原子逸出,来自受主缺陷OZn的可见发射随温度升高逐渐减弱,而当退火温度达到1000℃以上时样品成为富锌状态,此时与施主缺陷Zni有关的紫外发射急剧增强。