双原子分子离子SiC-激发态A2Ⅱ的势能函数的变分研究

根据能量变分的思想,将双原子分子离子XY 的新解析势能函数ECMI势和关于离子XY 的能量自洽法(Energy-consistent-method for ion, ECMI)推广到双原子分子离子XY-的势能函数研究之中,具体研究了双原子分子离子SiC-激发态A2∏的势能函数,并与将中性双原子分子的势能函数如Morse势和Huxley-Murrrell-Sorbie (HMS)势直接用于双原子分子离子XY-的结果和ab initio计算结果进行了比较.结果表明,ECMI势和ECMI方法对双原子分子离子XY-的势能函数研究同样是成功的,在重要的渐近区和离解区优于中性势能函数,与精确的ab initio结果一致.     

脉冲磁场处理对碳纳米管掺杂MgB2线材临界电流密度的影响

对碳纳米管(CNT)掺杂MgB₂超导体磁场处理后的行为进行了研究. 结果表明，CNT掺杂MgB₂超导体经5T脉冲磁场处理后临界电流密度J_c(H)在低磁场下提高了2—3倍，高场下提高一个数量级以上，扫描电镜结果显示CNT沿着处理磁场方向规则排列并且成为MgB₂基体的形核中心和高效的磁通钉扎中心. 关键词： 2')" href="#">MgB₂ 碳纳米管 脉冲磁场处理     

Surface rumpling of cubic CaTiO3 from density functional theory

In this paper, the structure of cubic CaTiO3 （001） surfaces with CaO and TiO2 terminations has been studied from density functional calculations. It has been found that the Ca atom has the largest relaxation for both kinds of terminations, and the rumpling of the CaO-terminated surface is much larger than that of TiO2-terminated surface. Also we have found that the metal atom relaxes much more prominently than the O atom does in each layer. The CaO-terminated surface is slightly more energetically favourahle than the TiO2-terminated surface from the analysis of the calculated surface energy.     

图像的自动采集分析和实现

文章针对焊件检测过程中需大量采集和分析实时图像的要求 ,利用小波分析的特点 ,相关跟踪识别视频图像运动状态 ,实现自动采集、分析处理和储存一并完成 ,解决了视频图像连续捕获不能得到高像质的问题。     

1.54μmEr3+,Yb3+共掺玻璃激光器的速率方程及数值分析

LD抽运共掺Er,Yb玻璃激光器中的跃迁过程较复杂,针对双掺离子之间的能量传递和Er3+的多种跃迁过程,给出了详细的准三能级系统的速率方程,在合理简化后进行了数值分析,分析了Er3+掺杂浓度和介质长度、抽运光斑、输出镜透过率、谐振腔长、抽运光的椭圆度等因素对激光阈值及斜率效率的影响. 关键词： 1.54μm激光 Er3+玻璃 速率方程 数值分析     

全球大气重力波联测期间电离层扰动的台阵观测

本文利用武汉电离层观象台的加密频高图和三站Doppler图记录及新近提出的短波扰动反演方法,分析了1985年全球大气重力波联测(WAGS)期间10月18日这天白天的重力波扰动,发现在该日扰动中有两列不同形态的波列分别属于中尺度的内重力波和大尺度的导制重力波。本文还进一步估算了这两列重力波的水平传播参量,深入分析了它们的频谱结构的高度变化特征,发现了重力波功率谱谱峰的分裂和偏移等重要现象。本文结果表明,新的反演方法使电离层无线电汉诊断的简易短波实验系统,也能成为探测和研究重力波一类大尺度电离层动力过程的有效手段。     

Surface analytical characterization of oxide-free Si(100) wafer surfaces

Summary Wet-chemical cleaning procedures of Si(100) wafers are surface analytically characterized and compared. Hydrophobic surfaces show considerably less native oxides in comparison to hydrophilic surfaces.The growth of the oxide is determined as a function of exposure to air by means of XPS measurements. The chemically shifted Si2p XPS signal is utilized for the quantification of the growth kinetics.One hour after cleaning no chemically shifted Si2p XPS peak is discernible on the hydrophobic surfaces. Assuming homogeneous oxide growth, the detection limit of native oxides is estimated to be below 0.05 nm using an emission angle of 18° with respect to the wafer surface. The calculation of the oxide thickness from the chemically shifted and nonchemically shifted Si2p XPS peak intensities is carried out according to Finster and Schulze [1]. For more than a day after cleaning no surface oxides can be identified on the hydrophobic surfaces. The oxide growth kinetics is logarithmic. The very slow oxidation rate cannot be attributed to fluorine residues since no fluorine is seen by XPS. We explain the slow oxidation rate by a homogeneous hydrogen saturated Si(100) wafer surface.

---

Oberflächenanalytische Charakterisierung oxidfreier Si(100)-Waferoberflächen

     

Effects of Nb2O5 on thermal stability and optical properties of Er3+-doped tellurite glasses

Er³⁺-doped tellurite glasses with molar compositions of xNb₂O₅-(14.7-x)Na₂O--10ZnO--5K₂O--10GeO₂-- 60TeO₂--0.3Er₂O₃ (x=0, 3, 5, 7 and 9) have been investigated for developing 1.5~μm fibre and planar amplifiers. The effects of Nb₂O₅ on the thermal stability and optical properties of Er³⁺-doped tellurite glasses have been discussed. It is noted that the incorporation of Nb₂O₅ (x=5) increases the thermal stability of tellurite glasses significantly. Er³⁺-doped niobium tellurite glasses exhibit a large stimulated emission cross-section (7.2\times 10^-21- 10.7×10^-21~cm² and the gain bandwidth, FWHM×\sigma_e^{\rm peak} (274\times 10^-28 - 480×10^-28~cm³), which are significantly higher than that of silicate and phosphate glasses. In addition, the intensity of upconversion luminescence of the Er³⁺-doped niobium tellurite glasses decreases rapidly with increasing Nb₂O₅ content. As a result, Er³⁺-doped niobium tellurite glasses might be a potential candidate for developing laser or optical amplifier devices.     

利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面，用光杠杆技术检测温度在20—40℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示：在升温过程中，微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形，这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中，微悬臂梁发生了反方向的弯曲变形，这对应着PNIPA 关键词： 构象转变 聚N-异丙基丙烯酰胺分子链 表面应力 微悬臂梁