非对称碰撞约束下形状记忆合金梁的随机响应与分岔

形状记忆合金(SMA)是二十一世纪具有形状记忆效应的新型智能材料.针对具有非对称约束的SMA梁,本文构造了碰撞振动系统.在无碰撞和有碰撞两种情况下,利用随机平均法给出了近似解析结果.数值模拟作为验证解析结果的工具.结果表明,系统能量的概率响应曲线具有非光滑特性.当约束位置发生变化时,系统会出现随机P分岔和D分岔.     

三元Ⅲ─V半导体合金的基态有序结构

利用了自旋１／２二维Ｉｓｉｎｇ模型及其“不等式方法”,确定了三元Ⅲ─Ｖ半导体会金（００１）面外延生长中的二维平面基态有序结构和基态相图,并通过层状叠加得到了合金中可能出现的长程有序结构,较好地说明了实验发现的（００１）衬底外延生长中的长程有序现象．     

新型尾式硫代苯并噻唑基卟啉化合物的合成与表征

通过不对称的单羟基卟啉化合物、溴代烷烃和巯基苯并噻唑合成了一系列新型硫代苯并噻唑基尾式卟啉化合物, 并采用核磁共振氢谱、碳谱、红外光谱、质谱和元素分析对卟啉化合物的结构进行了表征.     

高效液相色谱氮杂冠醚键合固定相的合成及性能研究

我们曾用γ－氯丙基键合硅胶（ＣＰＳ），在氢化钠（ＮａＨ）作用下合成了３－（氮杂－１８－冠－６）丙基键合固定相（ＢＣＰ）［１］．该固定相对碱基、核苷酸、硝基苯酚等有较好的分离选择性，但由于ＮａＨ对硅胶基质腐蚀作用较大，导致ＢＣＰ柱效及渗透性较低．本文采...     

CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

K＋I~2→K^+＋I~2^-离子对生成反应态－态几率与 选态截面的量子散射理论研 究

本文用Miller的-矩阵变分法在Aten-Lanting-Los两态势能面上计算了K＋I~2→K^+＋I~2^-电离反应的态－态几率和选态反应截面,结果表明了低电离阈能、几率的振荡行为及振动增强效应;电离截面随碰撞能及I~2振动量子数的变化规律与实验预测相吻合;讨论了反应机理。     

SYNTHESIS OF POLY ( ETHER-URETHANE) CONTAINING PENDANT AMINO GROUP

This paper is concerned with the synthesis of poly (ether-urethane) with pendant amino groups. The copolyether produced by ring opening copolymerization of tetrahydrofuran and epibromohydrin was treated with sodium azide in dimethylformamide to form azido substituted copolyether. The poly (ether-urethane) made from it was subjected to reduction reaction to convert azido group to amino group. The stress-strain behavior and dynamic-mechanical properties of poly (ether-urethane) containing pendant amino groups were studied.     

Octa-membered Water Ring Chain Based on Sulfonic Group in Ni（Ⅱ） Complex with 2-[（E）-（2-Oxidophenyl）methyleneamino] Ethanesulfonato and 2,2＇-Bipyridinyl

The title compound, [Ni（tssb）（2,2-bipy）2].5（H2O） 1 （tssbH2 =2-[（E）-（2-oxido- phenyl）methyleneamino]ethanesulfonato, 2,2-bipy = 2,2＇-bipyridinyl）, belongs to orthorhombic, space group Pbcn with a = 20.3983（18）, b = 17.6929（15）, c = 17.0897（15） nm, V= 6167.8（9） nm^3, Mr= 688.38, Z = 8, De = 1.481 g.cm^-3, F（000） = 2880,μ = 0.758 mm-1 and S =1.099. Each NiIr atom is six-coordinated by one N and one O atoms from one tssb^2- anion and four N atoms from two 2,2-bipy ligands to give a distorted octahedral geometry. Noticeably, there exists a rare octa-mem- bered water ring which presents a 1D chain by sulfonic group.     

THE PARAMETER KERNELS FOR THE LINEAR INVERSION OF THE FREE OSCILLATION OF THE EARTH (Ⅰ)

In the linear inversion of the radial variation of the parameters of the Earth by usingthe observed frequencies of various normal modes of free oscillation of the earth, it is neces-sary to know the values of the kernels of the parameters ρ, μ and λ. This paper describesthe methods of the derivation of the formulas of these kernels. This is the first part of thepaper in which only the toroidal oscillations are considered. They are much simpler thanthose of the spheroidal ones, that we will consider in the second part of the paper. The data of the two types of oscillations are equally important in the solution of theinversion problem, and should be employed simultaneously, and we know that the toroidaloscillations are much simpler than the spheroidal ones, it seems wise to divide the whole programof the inversion problem into steps: first, by employing the toroidal data to correct the twoparameters ρ and μ in the mantle, then by using the spheroidal data to correct the remain-ing parameters, i.e. th     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.