Al掺杂对尖晶石型Li[Mn(Al)]2O4结构的影响

采用共沉淀法按不同Al掺杂比例x[x=n(Al)∶n(Mn+Al)=0, 0.025, 0.050, 0.100, 0.150, 0.200]制得了Al(OH)3和Mn3O4混合物, 将其与LiNO3按一定比例混合, 在空气中于700 ℃烧结得Li[Mn(Al)]2O4样品. X射线衍射和Raman光谱结果表明, 在0≤x≤0.20范围内均得到了单相的尖晶石型样品, 随着x的增加, 晶胞参数减小, 晶格振动能量增加, Mn(Al)-O的结合增强, 结构稳定性增强.     

A Home-made Simple Set-up for Measurement of Electrochemical Surface Tension Spectrum on a Mercury Drop Electrode

A setup for recording surface tension curves at a mercury drop during potential scanning is designed based on photo-sensitive detection system. Surface tension spectrum at Hg drop can be recorded by voltammetric study. A Yb(III)-NO2- catalytic reduction system was used for characterization. The simple, sensitive technique can be expected to provide fresh information on molecular interactions at electrode surfaces.     

锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

Density functional study of HO(H2O)n (n = 1–3) clusters

The hydrogen bonding complexes HO(H₂O)_n (n = 1–3) were completely investigated in the present study using DFT and MP2 methods at varied basis set levels from 6‐31++G(d,p) to 6‐311++G(2d,2p). For n = 1 two, for n = 2 two, and for n = 3 five reasonable geometries are considered. The optimized geometric parameters and interaction energies for various complexes at different levels are estimated. The infrared spectrum frequencies and IR intensities of the most stable structures are reported. Finally, thermochemistry studies are also carried out. The results indicate that the formation and the number of hydrogen bonding have played an important role in the structures and relative stabilities of different complexes. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

CdS/SiO2复合材料的低频Raman散射研究

对用溶胶凝胶法制备的ＣｄＳ／ＳｉＯ２复合材料进行低频Ｒａｍａｎ散射研究，结果表明可从其低频Ｒａｍａｎ散射峰位计算出ＣｄＳ微晶的粒径，两种不同的低频振动模式由激发光的两种偏振方向加以区分，低频Ｒａｍａｎ散射射的二级散射峰根据实验结果加以指认，所得平均粒径结果与透射电镜观察结果有较好的对应关系，复合材料吸收光谱吸收边蓝移与ＣｄＳ纳米子粒径之间存在着密切的关系，实验证明，样品吸收边能量与ＣｄＳ平均粒径的     

Synthesis and Crystal Structure of N-cyclopropyl-9 -（3,4-dicholophenyl）- 1,2,3,4,5,6,7,8,9,10-decahydroacridine -1,8-dione under Microwave Irradiation

1 INTRODUCTION aryl or methyl group to the nitrogen atom of these compounds leads to enhanced activities of fluo- A lot of natural and synthetic compounds con- rescence[7, . Since the pyridine scaffold is included 8] taining acridine skeletons display interesting biolo- in decahydroacridine-1,8-dione, a question is whether gical and physical activities[1]. Acridinedione, for the same modification on the nitrogen atom of de- example, has been identified as antimalarial and cahydroacridine-1…     

偶氮胂-DBS用于光度法测定牛血清白蛋白

在室温下,于pH 2.5的Britton-Robinson缓冲溶液中及非离子表面活性剂OP存在下,牛血清白蛋白(BSA)与偶氮胂-DBS的复合物的最大吸收在514 nm波长处,但显色复合物与试剂空白吸光度之差在370 nm处最大,选择在370 nm处测定,反应迅速完成。非离子表面活性剂OP可提高反应灵敏度及复合物稳定性。乙醇可提高体系灵敏度。BSA的质量范围在0~60.0 mg.L-1范围内符合比耳定律,方法表观摩尔吸光率3ε70 nm=8.58×105L.mol-1.cm-1。方法用于测定血清样品中蛋白质的总量,5次测定值的RSD为0.60%,回收率为98.0%。     

载铜5A分子筛在汽油模拟体系中脱硫性能的研究

近年,美国环保局计划将汽油中硫的质量分数从当前的300×10-6降到2006年的30×10-6,欧盟也已经通过了新的汽油硫质量分数标准为30×10-6~50×10-6,德国甚至提出计划使用无硫汽油[1]。中国汽油硫的质量分数高达800×10-6以上,与世界汽油品质距离甚远。因此汽油中硫化物的脱除成为当务之急。目前,脱硫技术主要有催化裂化脱硫、催化加氢脱硫、水蒸气脱硫、生物催化脱硫、吸附精制脱硫、氧化脱硫等[2~5]。吸附精制法具有净化度高、能耗低、易于操作等优点,高效的脱硫吸附剂制备是过程开发的关键。负载金属离子的活性纤维是脱除汽油中硫醇的一种…     

关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅰ.拉伸取向过程的表征

 用超高分子量聚丙烯的对二甲苯溶液中冷却析出的结晶沉积压制成的结晶垫,经热拉伸制备了不同拉伸倍数的薄膜.与用低分子量聚丙烯制备的结晶垫或熔融结晶物不同,超高分子量聚丙烯的结晶垫显示出极高的拉伸变形性能,因而制得了高达69倍的拉伸样品.WAXD照片表明在未拉伸的结晶垫中,微晶的c轴沿结晶垫法线方向择优取向,但仅经2-4倍的拉伸,微晶即发生破裂,且产生的较小的折叠链微晶已转向沿拉伸轴方向取向;晶区取向因子在拉伸过程中迅速增加并在较低拉伸倍数下即接近于理想取向.但非晶区取向因子在整个拉伸领域中增加缓慢.随拉伸倍数的增大,晶粒尺寸D₁₁₀及D₀₄₀逐渐减小;而长周期L逐渐增加.这表明在高倍拉伸样品中存在着折叠链被从片晶中拉出并部分形成伸直链结晶的转变.