Multi-hybrid method for investigation of EM scattering from inhomogeneous object above a dielectric rough surface

An iterative strategy combining Kirchhoff approximation(KA) with the hybrid finite element-boundary integral(FE-BI) method is presented in this paper to study the interactions between the inhomogeneous object and the underlying rough surface.KA is applied to study scattering from underlying rough surfaces,whereas FE-BI deals with scattering from the above target.Both two methods use updated excitation sources.Huygens equivalence principle and an iterative strategy are employed to consider the multi-scattering effects.This hybrid FE-BI-KA scheme is an improved and generalized version of previous hybrid Kirchhoff approximation-method of moments(KA-MoM).This newly presented hybrid method has the following advantages:(1) the feasibility of modeling multi-scale scattering problems(large scale underlying surface and small scale target);(2) low memory requirement as in hybrid KA-MoM;(3) the ability to deal with scattering from inhomogeneous(including coated or layered) scatterers above rough surfaces.The numerical results are given to evaluate the accuracy of the multi-hybrid technique;the computing time and memory requirements consumed in specific numerical simulation of FE-BI-KA are compared with those of MoM.The convergence performance is analyzed by studying the iteration number variation caused by related parameters.Then bistatic scattering from inhomogeneous object of different configurations above dielectric Gaussian rough surface is calculated and the influences of dielectric compositions and surface roughness on the scattering pattern are discussed.     

蜂窝密封内耦合传热特性的研究

采用耦合传热数值计算方法,研究了典型航空发动机阶状蜂窝密封内的传热特性,并利用实验数据对数值方法的正确性进行了考核。计算得到的转子面和静子面上换热系数分布与实验值吻合良好。通过对比5种不同的两方程涡黏湍流模型,结果表明:k-ω湍流模型和SST湍流模型在高温度梯度区域对换热系数分布的求解具有较高的精度,明显优于标准k-ε和k-εRNG湍流模型。与光滑面迷宫密封相比,蜂窝芯格结构对转子面上平均换热系数影响较小,但大幅减小了密封静子面上的换热能力;蜂窝芯格结构使得齿尖温度梯度略微增大,但明显使得静子固体区域的温度梯度减小。     

Production mechanism of superheavy nuclei in massive fusion reactions

Within the concept of the dinuclear system (DNS), a dynamical model is proposed for describing the formation of superheavy nuclei in complete fusion reactions by incorporating the coupling of the relative motion to the nucleon transfer process. The capture of two heavy colliding nuclei, the formation of the compound nucleus and the de-excitation process are calculated by using an empirical coupled channel model, solving a set of microscopically derived master equations numerically and applying statistical theory, respectively. Fusion-fission reactions and evaporation residue excitation functions of synthesizing superheavy nuclei (SHN) are investigated systematically and compared them with available experimental data. The possible factors that affecting the production cross sections of SHN are discussed in this workshop.     

基于手机摄像头的可见光寻书导航系统

针对在大型图书馆内寻书难的问题设计了一种基于手机摄像头的可见光寻书导航系统,该系统将LED可见光通信技术应用于图书馆内寻书导航中,并创新性的采用手机摄像头为LED可见光通信技术的接收端。配合使用自主设计的手机寻书软件,可实现图书馆内精确定位和实时导航,有效解决了寻书难的问题。     

PbSe量子点液芯光纤的温度效应

采用三能级系统的速率方程和功率传输方程并考虑温度对各项参数的影响,求解在不同的光纤长度和量子点掺杂浓度时,3.3nm PbSe量子点液芯光纤的发射光谱随温度的变化。发现当光纤长度不同时,随着温度的升高,光谱的峰值位置以相近的速率发生红移,光谱的峰值强度下降。对于较长的光纤,其光强随温度升高的衰减速率较大。当掺杂浓度不同时,随着温度的升高,光谱的峰值位置以相近的速率发生红移,峰值强度以相近的速率衰减。     

使用多光谱手段研究熔石英断裂机理

熔石英玻璃是高能激光系统中不可缺少的光学材料,其损伤问题一直是限制系统能量提升的瓶颈之一。通过纳秒激光脉冲诱导熔石英玻璃样品产生断裂,并使用多光谱手段对断裂前后样品进行检测,从而在实验和理论上了解了样品断裂形貌及内部相变结构成因,并从宏观到微观上统一解释了断裂形貌和相变结构的关系。在激光等离子冲击波作用下,熔石英发生断裂,且冲击波作用过程中在玻璃内部产生了推动裂纹扩展的尖端环向应力。在尖端环向应力作用下,不同损伤区域形成了不同扩展速度和长度的裂纹, 按照裂纹形貌特性差异可以将断裂区分为雾化区、羽毛区、镜面区三个部分。使用透射光谱、能量散射光谱检测损伤前后样品,发现裂纹的产生引起了玻璃透过率和带隙的下降,且断裂区出现氧原子游离或缺失;使用Raman光谱检测样品损伤前后不同形貌区,发现等离子冲击波使熔石英中Si-O-Si键断裂并发生重组,导致镜面区、羽毛区、雾化区三元拓扑环和四元拓扑环宏观上对应的斯石英相和柯石英相的相对含量依次升高,破坏了材料的固有原子结构特性,使材料断裂区向高密度相转变。氧游离的发生会在玻璃内部产生的大量缺陷,从而使得玻璃透过率及带隙下降,严重影响了玻璃的性能。     

r-过程路径核β——衰变半衰期的估算

分析了20 < A < 190范围内丰中子核β衰变的实验数据,根据半衰期随质子数、中子数以及衰变能变化所呈现的壳效应和对效应等特点,提出了一种有效估算丰中子核β衰变寿命的公式。新的计算公式形式简单包含了较少的参数、计算量小。用该公式能较为准确地再现丰中子核的β衰变半衰期。用RIKEN最新测量丰中子核半衰期检验了该公式的外推能力,本工作可以为r-过程研究提供可靠的输入数据。Experimental data of the β--decay half-lives for the nuclei with atomic number between 20 and 190 are investigated. We have systematically studied the shell effects and pairing effects on β--decay half-lives versus the decay energy Q and nucleon numbers (Z, N). An empirical formula has been proposed to calculate the β--decay half-lives of neutron-rich nuclei. The empirical formula is simple and has relatively few parameters. Experimental β--decay half-lives of the neutron-rich nuclei are well reproduced by the new formula. In addition, the extrapolating capacity of this formula has been checked with the very recent experimental data from RIKEN. The predicted half-lives for r-process relevant nuclei with the current formula can be served as the reliable input of r-process model calculations.     

HCCB-DEMO氦冷固态包层热工水力计算及分析

根据这几年HCCB-DEMO包层技术的发展,对原氦冷固态氚增殖包层进行相应设计改进。利用三维有限元软件CFX对该改进设计进行了热工水力学计算及分析。分析模型包括：第一壁,增殖单元,筋板以及三者集成模型。结果表明：各子部件在单独分析的情况下,材料最高温度低于设计要求限值;冷却剂进出口温度为300/500°C,满足设计需求。同时对比分析了集成计算及单独计算的结果,得出第一壁与铍球床之间的相互热作用较大,铍球床材料最大温度会高于设计限值。针对经集成计算后发现的问题,未来将对氦冷固态包层的设计进行进一步的优化。     

掺镱石英光纤预制棒的制备与表征

采用改进化学汽相沉积结合溶液掺杂法制备了掺镱石英光纤预制棒,并研究了不同镱掺杂浓度下的吸收光谱和发光光谱.吸收光谱和发光光谱的强度随着YbCl₃溶液浓度的增大而增强.在不产生失透的前提下,得到预制棒芯层能够掺杂的YbCl₃溶液最大浓度为0.057 mol/L.