浓硫酸性质实验的整合创新设计

对浓硫酸的几个性质(吸水性、脱水性、强氧化性、遇水放热性、催化性)实验进行了整合创新设计, 解决了教材实验中的药品耗量大、不易操作、药品易撒落、易污染水源、耗时长、不适合学生分组实验等缺点。整合创新后设计的实验不仅操作简便、体现绿色实验理念, 而且操作安全, 适合中小学生开展课外活动。     

A Convenient “Turn On-off” Phosphorescent Nanosensor for Detection of Biotin Based on Quantum Dots/CTAB

A switchable room-temperature phosphorescence(RTP) nanosensor based on an MPA-capped Mn-doped ZnS QDs/CTAB composite system(MPA=3-mercaptopropionic acid; CTAB=cetyltrimethyl ammonium bromide; QDs=quantum dots) was established for the detection of biotin. The phosphorescence intensity of QDs/CTAB could be regularly quenched with the increase of biotin. Under optimal conditions, this method yielded two linear ranges of 2-20 μg/L and 20-140 μg/L with respective correlation coefficients of 0.993 and 0.990, as well as a detection limit of 0.93 μg/L. Therefore, the analytical potential of the proposed nanosensor was evaluated by detecting biotin in urine and biotin tablets. This approach yielded satisfactory results because of the effective elimination of background fluorescence and light scattering from the sample matrix. This approach provides a practical method for biotin detection.     

Source Apportionment Research of Fine Particulate Matter in the Atmosphere by PAHs

Haze weather frequently occurs in many cities in China. Polycyclic aromatic hydrocarbons(PAHs) in fine particulate matter(PM_2.5) can adversely affect the environment and human health. In this paper, PM_2.5 samples were collected at nine sites in a city in northeastern China from September 2013 to October 2014. Sixteen USEPA(US Evironment Protection Agency) priority PAHs in PM_2.5 were analyzed to determine their spatial and temporal distribution characteristics. The source apportionment of PAHs was conducted with the Positive Matrix Factorization(PMF) model. The results indicate that the concentrations of total PAHs(T-PAHs) in PM_2.5 are within the range of 0.26 to 72.48 ng/m³. The seasonal variation of T-PAHs is winter >spring >autumn >summer, and the space distribution of PAHs is JZP >DP >BFH >LP >EESA >IPT >CP >HZMC >JYP. In all types of PAHs, three-ring and five-ring PAHs are significantly prominent(62%) in the heating period due to petrogenic sources and traffic emissions. Middle- and high-ring PAHs in the non-heating period are caused by coal combustion and vehicle exhaust, which accounts for 77% of the total emissions. The source apportionment results obtained by the diagnostic ratio of PAHs reflect that coal burning, traffic and other sources have a distinct influence on PAH emissions in this city. Six factors are defined by PMF v5.0, namely, coke oven emissions(7.7%), biomass burning(44.3%), petrogenic sources(10.7%), coal combustion(10.4%), gasoline engine emissions(16.7%), and diesel engine emissions(10.3%). The results indicate that the PAHs in PM_2.5 in the city are primarily caused by combustion processes and vehicle exhaust.     

Investigation of the Evolution Behavior of Light Tar During Bituminous Coal Pyrolysis in a Fluidized Bed Reactor

The evolution behavior of the light tar fraction of tar during large bituminous coal particle pyrolysis in a fluidized bed reactor at 500-900℃ was investigated to optimize the industrial process. The coal residence time was varied from 30 s to 150 s. The crude tar obtained was distilled and separated into the light fraction and the heavy fraction through an evaporator under conditions of 280℃ and 10⁴ Pa. The light tar was subjected to GC-MS analysis, and the 300 main species in each spectrum were determined and analyzed. The experimental results showed that the evolution behavior of the light tar fraction and the heavy tar fraction presented spectacularly different variation trends with pyrolysis temperature and coal residence time. The molecular weight and number of rings per aromatic compound molecule contained in the light tar fraction increased with increasing pyrolysis temperature because of polymerization. It was also observed that the amount of methyl substituents decreased with an increasing number of rings per molecule of poly-aromatic ring compounds. The chain aliphatic compound evolution was suppressed and underwent heterocyclization with increasing temperature.     

鹿角形状钛酸钡制备及其介电共振现象研究

不同形貌钛酸钡通过将氧化钛前驱体球和钡盐在碱性条件下进行水热和高温烧结制备出来,其与石蜡混合物(75 wt;)在12 GHz微波频率附近发生了介电共振现象.由于钛酸钡是晶格常数降低的顺电立方相/四方相,发生原因是电致伸缩/逆压电效应产生的弹性纵波在晶粒内部的共振吸收.不同条件制备钛酸钡晶粒尺寸(219 nm)趋于一致,共振频率相近,经过110℃水热和1100℃烧结制备的鹿角形状钛酸钡晶粒较大(657 nm)并且相互联接使得共振加强.本工作证明了通过改变钛酸钡晶粒尺寸和形貌从而改变微波介电性能.     

单晶硅的纳米力学响应及其相变机制

硅在大规模集成电路、MEMS/NEMS、半导体工业中具有不可替代作用,但是目前对硅的塑性变形及其相变机制的理解远未成熟.采用大规模分子动力学模拟研究(100)面的单晶硅在球形金刚石压头纳米压入过程中的纳米力学响应、相变过程和相分布规律.结果表明:在弹性变形阶段载荷-压深曲线与Hertz接触理论预测结果相吻合.两者的分离点准确地预示了塑性变形的发生.金刚石结构的Si-I相向体心结构的BCT5相转变导致了单晶硅初始的塑性变形.初始形成的BCT5相在次表面形成了一个倒置的金字塔形结构.Si-II相的形成则稍微滞后一些.在较大的载荷下BCT5在压入面上形成一个四重对称的图案分布.相对于小压头条件下大的BCT5相区,大压头更有利于SiII相的发展.卸载后生成的高压Si-II相和BCT5相全部转变为非晶硅.研究结果确认了单晶硅纳米压入中BCT5相的存在;揭示了单晶硅塑性变形的相变机理,即Si-I转变为BCT5和Si-II相;并强调了Si-I相向BCT5相转变对于单晶硅塑性变形的重要作用.     

基于棱镜扫描法的太阳光谱仪光谱定标

为了标定扫描式棱镜太阳光谱仪的棱镜不同转动角度对应的中心波长和光谱带宽,利用了一种棱镜扫描方法对太阳光谱仪的光谱响应函数进行测量。该方法使用固定的单色光波长,控制棱镜转动实现单色光的像在探测器位置扫描,并通过坐标映射得到响应位置的光谱响应函数。文中根据光谱响应函数的定义,推导出棱镜扫描法与单色仪波长扫描方法波长定标原理上的等效性。之后分别以532 nm固体激光器和632.8 nm氦氖激光器为光源,使用棱镜扫描法测量太阳光谱仪对应波长位置的光谱响应函数,并以单色仪波长扫描法实验作为对比。实验结果表明,对于扫描式棱镜太阳光谱仪,棱镜扫描法测量的中心波长分别为531.86和632.67 nm,其准确度优于单色仪波长扫描法测得的531.39和631.97 nm。由于不受单色仪性能的限制,前者测量的光谱带宽值也优于后者。最后以汞灯为光源使用棱镜扫描法对太阳光谱仪进行了光谱定标实验,实现了特征光谱定标法结合棱镜扫描法对中心波长及光谱带宽的标定。该方法同样可以应用于扫描式光栅光谱仪以及单色仪的光谱定标。     

特低渗透油藏面积井网见水时间计算

特低渗透油藏在水驱开发过程中常表现出渗透率各向异性和流体非达西渗流特征,运用非达西渗流公式及流线积分法,得到特低渗透油藏五点井网、反九点井网和菱形反九点井网在油水两相非活塞式驱替条件下的油井见水时间.计算长庆鄂尔多斯盆地某特低渗透油藏井网见水时间,结果与实际动态符合较好.分析油水黏度比、渗透率各向异性及启动压力梯度对油井见水时间的影响,结果表明：油水黏度比越大,油井的见水时间越早;当菱形反九点井网长轴方向井距与短轴方向井距之比与渗透率各向异性强度大致相等时,长轴方向与短轴方向上的角井能实现均衡驱替;启动压力梯度延缓了油井的见水时间,且生产井距越大,启动压力梯度的影响越显著.     

Ce:Y_3Al_5O_(12)透明陶瓷的制备和荧光性能的研究

以Ce(NO3)3.5H2O,Y(NO3)3.5H2O和A l(NO3)3.9H2O为原料,NH4HCO3为沉淀剂,采用醇水溶剂共沉淀法在弱还原气氛下1100℃煅烧2 h合成纯相1 at%Ce∶YAG纳米粉体,经1800℃真空烧结10 h后得到了Ce∶YAG透明陶瓷。通过XRD、TEM、SEM和荧光光谱仪对粉体和陶瓷进行了表征。结果表明:所制得的Ce∶YAG纳米粉体散均匀、团聚程度轻、结晶良好,平均晶粒尺寸约35 nm。Ce∶YAG透明陶瓷和纳米粉体的发射峰都在530 nm附近,但透明陶瓷的发射强度明显比纳米粉体强,且发射峰向长波方向移动。     

两个基于4-(1H-1,2,4-三氮唑)苯甲酸的4d-4f异核配位聚合物的合成、结构及荧光性质

以4-(1H-1,2,4-三氮唑)苯甲酸(Htbc)为配体,采用水热法合成了两种新型4d-4f配位聚合物{[EuAg(tbc)₃(H₂O)]ClO₄·H₂O}_n(1)和{[Eu₂Ag₃(tbc)₆(NO₃)₂(H₂O)₂](ClO₄)₂·2H₂O}_n(2)。运用X射线单晶衍射法对该配位聚合物进行了结构测定,并对其进行了元素分析、红外光谱、PXRD及荧光光谱表征。单晶结构表明,配位聚合物1为正交晶系,空间群P2₁2₁2₁,由一维三股螺旋链(其中2股右手螺旋和1股左手螺旋)通过Ag将其连成二维平面。配位聚合物2属于三斜晶系,空间群为P1,由内消旋一维两股螺旋链通过Ag将其连成二维平面。配位聚合物1和2的二维链结构均通过非共价键作用形成三维超分子, 同时也表征了配位聚合物1和2的荧光性质。