横向射流式单重态氧发生器的性能实验研究

 对氧碘化学激光器的单重态氧发生器（SOG）进行了改进，采用横向射流方式，并对该横向射流式单重态氧发生器的性能进行了检测。实验中过氧化氢碱溶液温度控制在－16℃左右,氯气流量为530mmol/s，He与氯气的流量比为3;采用PS法测量单重态氧分子的产率,吸收法测量氯气的利用率和相对水含量。得出如下结论:在不使用冷阱和分离器的情况下，最高单重态氧分子产率达到58%, 氯气利用率在80%以上,相对水含量小于等于0.5;气体达到最大流量时,发生器仍然能稳定地工作。     

Synthesis of Cationic PEM Emulsion and Application in Waste Water Treatment

Cationic polymer as a kind of flocculant is widely applied in purification treatment of waste water. Because it has positive charge group, it is able to connect strongly the suspended matters, short cellulose and other microparticles. The research on synthesis of cationic polymer and application in treatment of waste water is very universal abroad. But domestic research on those is not general. The technology of synthesis of PEM is simple, and the production cost is low. It is easy to apply in treatment of waste water.Synthesis of PEM Emulsion FlocculantSome distilled water, PVA(poly(vinyl alcohol)), EA(ethyl acrylate), and K2S2O8(potassium persulfate) were put into reaction vessel. Kept stirring up under nitrogen. When heated the solution to 40℃, dropped the water solution of MTA[(2-methacryloxylethyl)trimethyl ammonium].Maintained the temperature at 70℃, reacted about 7-8 hours. Then got the PEM emulsion. Changed the ratio of EA and MTA. Obtained a series of PEM emulsions.Stability and Convertibility of PEM EmulsionThe test results showed that when the EA/MTA was 85/15, the PEM emulsion was most stable.When the total monomer quantity was 35%, the convertibility of PEM emulsion was the highest,i.e.98.6%.The MTA Copolymerization Ratio and Morphology of PEM EmulsionWhen the monomers EA/MTA=85/15 and total monomer quantity was 35%, the MTA copolymerization ratio of PEM emulsion was 95.15%(the highest), and the PEM emulsion was some microspheres with 100-180nm of diameter.The Test Results of PEM Emulsion in Treatment of Waste Water The PEM emulsion flocculant was applied in treatment of waste water of paper mill, and measured the precipitation time(t) and transmittancy(T). The test results were showed in table 1. The optimum value of PEM which was able to make the waste water of paper mill into clear water was 0.008%.     

The Research on Polymer Microcapsulation for Cell Technology

Microcapsulation is a technology that enwrapped the solid or liquid or some gas matter with membrane materials to form microparticles(i.e.microcapsules). The materials of microcapsule is composed of naturnal polymers or modified naturnal polymers or synthesized polymers. The water-soluble core matter can only use oil-soluble wall materials, and vice versa.Synthesized methods of polymer microcapsulesSynthesized methods with monomers as raw materialsThis kind of methods include suspension polymerization, emulsion polymerization, dispersal polymerization, precipitation polymerization,suspension condensation polymerization, dispersal condensation polymerization, deposition condensation polymerization, interface condensation polymerization, and so on.Synthesized methods with polymers as raw materialsThese methods are suspension cross-linked polymerization, coacervation phase separation,extraction with solvent evaporation, polymer deposition, polymer chelation, polymer gel,solidification of melting polymer, tray-painted ways, fluidized bed ways, and so forth.Polymer materials to synthesize microcapsules2.1. Naturnal polymer materialsThe characteristics of this kind of materials are easy to form membrane, good stability and no toxicity. The polymer materials include lipids(liposome), amyloses, proteins, plant gels, waxes, etc.2.2. Modified polymer materialsThe characteristics of these materials are little toxicity, high viscidity(viscosity), soluble salt materials. But they cannot be used in water, acidic environment and high temperature environment for a long time. The materials include all kind of derivants of celluloses.2.3. Synthesized polymer materialsThe characteristics of the materials are easy to form membrane, good stability and adjustment of membrane properties. The synthesized polymer materials include degradable polymers(PLA, PGA,PLGA, PCL, PHB, PHV, PHA, PEG, PPG and the like) and indegradable polymers(PA, PMMA,PAM, PS, PVC, PB, PE, PU, PUA, PVA and otherwise).The applications of polymer microcapsules in cell technologyThe "artificial cell" is the biological active microcapsule used in biological and medical fields.The applications of cells (including transgenic cells, the same as artificial cells) technology include several aspects as follows:3.1. Microcapsulation of artificial red cell3.2. Microcapsule of artificial cell of biological enzyme3.3. Microcapsule of artificial cell of magnetic material3.4. Microcapsule of artificial cell of active carbon3.5. Microcapsule of active biological cell     

An Unusual Reductive Ring-opening Reaction of Phthalimide with Sodium Hydride in DMF

An unusual reductive ring-opening reaction of phthalimide with sodium hydride in anhydrous DMF was observed for the first time. The presumed mechanism was described in detail.     

Stability Conditions of the MMAP [ K ]/ G [ K ]/1/ LCFS Preemptive Repeat Queue

In this paper, we study the stability conditions of the MMAP[K]/G[K]/1/LCFS preemptive repeat queue. We introduce an embedded Markov chain of matrix M/G/1 type with a tree structure and identify conditions for the Markov chain to be ergodic. First, we present three conventional methods for the stability problem of the queueing system of interest. These methods are either computationally demanding or do not provide accurate information for system stability. Then we introduce a novel approach that develops two linear programs whose solutions provide sufficient conditions for stability or instability of the queueing system. The new approach is numerically efficient. The advantages and disadvantages of the methods introduced in this paper are analyzed both theoretically and numerically.     

花丝内插物强化竖直管内凝结换热的实验研究

1前言大空隙率多孔体管内插物-绕花丝内插物，被认为是强化管内凝结换热的最有效途径之一[1]．但以往的研究，由于实验雷诺数范围较小，蒸汽速度较低，要正确全面评价其性能尚显不够。本文在原有工作的基础上，进一步完善了实验系统，改进了测试手段，扩大了实验雷诺数范围，并测试了其阻力性能，对花丝内插物强化管内凝结换热进行了较深入全面的实验研究，以全面评价花丝内插物对管内凝结换热的强化效果。2实验系统本文实验系统如图1所示。实验段是一个竖直套管冷凝器，如图2所示．本试验研究蒸汽完全凝结时的传热。凝结水流量采用容积法计…     

一类经典”秘书问题”的推广

”秘书问题”在最优停时理论的发展中曾起过重要作用 ,实际中的一类问题与”秘书问题”有类似之处 ,但比”秘书问题”更复杂 .本文将经典”秘书问题”进行推广 ,建立了一类比经典”秘书问题”更有实际意义的模型 ,并给出了该类模型的解 .     

用Josephson结电子模拟器测量磁通量子2e/h

介绍用Josephson结电子模拟器在政党温度下，模拟测量磁通量子2e/h，用模拟器来研究Josephosn结的特性。该实验可作为普通物理实验中课题设计实验的一个内容。     

非晶态锂离子导体B2O3-0.7Li2O-0.7LiCl-xAl2O3-0.1V2O5的电学性质和电子自旋共振研究

对两种非晶态B₂O₃-0.7Li₂O-0.7LiCl-xAl₂O₃-0.1V₂O₅(x=0.05和0.15),用差热分析、电导率测量、X射线衍射和电子自旋共振进行研究,发现:1)V₂O₅不仅作非晶网络形成剂,而且改变了晶化过程;2)对B₂O₃-Li_{2关键词：}     

Kinetic Studies of Electrochemical Oxidation of 1,3-Benzenedithiol

The electrochemical oxidation of 1, 3-benzenedithiol was investigated in a 0. 100 mol/L tetrabutylammonium perchlorate/acetonitrile electrolyte. The electrochemical techniques used were potential sweep, bulk electrolysis, rotating disc and the potential step method. The combination of the techniques yielded the number of electrons transferred per molecule, the reaction order, the transfer coefficient, the diffusion coefficient and concentration of dithiol anions, the standard heterogeneous rate constant as well as the formal potential and equilibrium constant of the preceeding dissociation reaction. This paper also illustrates the methods for studying the electrode kinetics of reactions which (a) involve a chemical reaction preceeding the electron-transfer process, (b) have insoluble polymer products, and (c) are totally irreversible.