Photo-and Electro-luminescence of the New Ternary Europium(III) Complex

In recent years, the interest in developing luminescent lanthanide complexes has been greatly stimulated by their potential use in electroluminescent displays1. Europium complexes appear most attractive in view of the high photoluminescent efficiency and the high monochromatic red light that are widely exploited in full-color displays2. It has been approved that the second ligand plays an important role in europium complexes, the synergistic complexation of the second ligand can not only lead …     

Synthesis and Crystal Structure of a New 2D Honeycomb-like Cadmium(II) Complex with Tripodal Ligand

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｅｐａｓｔｓｅｖｅｒａｌｙｅａｒｓ ,ｃｏｎｓｉｄｅｒａｂｌｅｐｒｏｇｒｅｓｓｈａｓｂｅｅｎａｃｈｉｅｖｅｄｉｎｃｏｎｔｒｏｌｌｉｎｇｔｈｅａｓｓｅｍｂｌｙｏｆｉｎｄｉｖｉｄｕａｌｂｕｉｌｄｉｎｇｂｌｏｃｋｓｉｎｔｏｓｔｒｕｃｔｕｒｅｓｗｉｔｈｓｐｅｃｉｆｉｃｔｏｐｏｌｏｇｉｅｓａｎｄｉｎｔｅｒｅｓｔｉｎｇｐｒｏｐｅｒｔｉｅｓｓｕｃｈａｓｍｏｌｅｃｕｌａｒｒｅｃｏｇｎｉｔｉｏｎ ,ｉｏｎｅｘｃｈａｎｇｅａｎｄｓｅｌｅｃｔｉｖｅｇｕｅｓｔｉｎｃｌｕｓｉｏｎ .1 3 Ｉｔｉｓ…     

典型钙/镁基吸附剂对二氧化硒吸附特性研究

针对钙/镁基矿物吸附剂的主要组分CaO、CaCO₃、MgO在500-800 ℃下对Se的吸附特性进行研究，并选取天然矿物方解石、白云石研究其对Se的吸附效果，且对矿物煅烧所得CaO进行吸附实验。结果表明，三种组分中CaO的吸附效果最佳，800 ℃时单位质量CaO对Se的吸附量可达368 mg/g。CaCO₃对Se的吸附在700 ℃时效果最佳且其吸附产物的热稳定性较好。镁基吸附剂仅在中温段对Se具有一定吸附效果。方解石对Se的吸附效果随温度变化趋势与CaCO₃相似，因其较好的孔隙结构，吸附效果略优于CaCO₃。煅烧方解石得到的F-sor对Se的吸附效果优于CaO和CaCO₃煅烧得到的C-sor，这与其良好的比表面积、孔隙结构与抗烧结能力有关，且F-sor吸附产物的热稳定性相对较好。F-sor对Se的吸附量最高可达403 mg/g。     

PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Perfectly dissolved boron nitride nanotubes due to polymer wrapping

We report for the first time that boron nitride nanotubes (BNNTs) may be dissolved in organic solvents by wrapping them with a polymer. Transmission electron microscopy and cathodoluminescence studies indicate the strong pi-pi interactions between BNNTs and the polymer. A band gap ranging from 5.2 to 5.5 eV was documented for the BNNTs independent of their geometrical characteristics by using ultraviolet-visible absorption experiments on composite films and thin BNNT films prepared from solutions.     

卟啉作为信号传递介质的紫外可见光谱研究

合成了6种氨基酸水杨醛席夫碱(Sal-AA)：Sal-Gly(甘氨酸)、Sal-Phe(苯丙氨酸)、Sal-Arg(精氨酸)、Sal-Tyr(酪氨酸)、Sal-Met(甲硫氨酸)、Sal-Glu(谷氨酸)及其金属铜配合物。并分别在2种不同介质(三氯甲烷和甲醇)中，与四苯基卟啉TPP进行反应，研究了其紫外可见光谱性质，讨论了卟啉作为人工信号转导体系的传递介质，与氨基酸水杨醛席夫碱铜配合物的反应中，实现信号分子铜离子进一步传递的可能性以及溶剂对该信号传递的影响。结果表明，在三氯甲烷为溶剂时，除了Sal-Met的铜配合物之外，其余均能被TPP夺取而形成Metal TPP。而在以甲醇为溶剂时，只有Sal-Gly的铜配合物能被TPP所夺取。     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

FTIR-ATR技术研究聚氨酯类文物保护材料的光降解

Polyurethanes are one kind of relic protection materials commonly used. During artificial photo-ageing, three polyurethanes, HDI-based polyurethane, MDI-based polyurethane and TDI-based polyurethane, have been considered to undergo UV radiation. Photochemical degradation of the polyurethanes has been monitored by means of Fourier transform infrared spectroscopy with attenuated total reflection accessory （FTIR-ATR）. It was proved that the mechanism of the photochemical degradation of polyurethanes might be the scissions of carbamate （urethane） groups and the re-reactions of radical groups formed in the scission reactions. From the experiment results HDI-based polyurethane, an aliphatic diisocyanate, could be considered to be more suitably used as relic protection materials among these three polyurethanes for its ageing products with less color.