同步辐射白光全反射XRF在痕量元素检测的初步应用研究

叙述了同步辐射白光全反射Ｘ射线荧光分析的实验装置，给出了几种标准物质ＴＸＲＦ实验的检出限，并对实验结果进行了讨论。     

LiNbO3晶体中Pr3+离子的配位场能级计算

在C3v点群对称场中，运用双层点电荷配位场（DSCPCF）模型计算了LiNbO3晶体中Pr^3＋离子的40个配位场能级，与实验值相比，其均方根偏差为19．94cm^-1，优于文献值（44．22cm^-1）．所得晶体场参数也明显好于文献值，说明双层点电荷模型能更好地拟合实验结果，对于研究C3v对称场中稀土离子的光谱特性具有非常重要的意义．     

小分子配体诱导合成N,N-二苄基二硫代氨基甲酸镉(II)配合物及晶体结构

4,4'-联吡啶与二苄基二硫代氨基甲酸镉配合物[Cd(DBTC)₂]₂ (1)反应得到加合物[Cd(DBTC)₂(4,4'-bipy)] (2) (DBTC＝N,N-二苄基二硫代氨基甲酸), 通过晶体结构分析及红外光谱等研究其结构与性质. 结果表明: 引入小分子配体会破坏[Cd(DBTC)₂]₂ (1)的二聚结构, 加入吡啶则得到单核的吡啶加合物[Cd(DBTC)₂py] (3), 而引入4,4'-联吡啶后其结构变为新型的一维链状结构的配位聚合物2, 这种结构在二硫代氨基甲酸金属配合物中少见报道. 也比较了不同配体如吡啶及4,4'-联吡啶对Cd(II)及Zn(II)配合物结构的影响.     

A Novel Preparation of 2,4-Disubstituted Quinolines Catalyzed by FeCl3 ·6H2O in Ionic Liquids

Quinolines and their derivatives occur in numerous natural products. Many quinolines display interesting physi ological activities and have found attractive applications as pharmaceuticals and agrochemicals as well as being general synthetic building blocks. [1] Many synthetic methods have been developed for quinolines, [2] but due to their great importance, the development of novel synthetic methods remains an active research area. [3]     

纳米多孔双金属氧化物在镍钛合金纤维上的原位生长及其对多环芳烃的选择性固相微萃取

采用阳极氧化法在镍钛合金(NiTi)纤维上原位生长了双金属氧化物纳米孔(NiTiONPs)涂层,通过扫描电镜(SEM)和能谱(EDS)考察了电解质组成和电压对形貌的影响。将NiTiONPs涂层的NiTi纤维与高效液相色谱-紫外检测器联用,研究了4种典型芳香分析物的萃取性能。结果表明,富含TiO2的NiTiONPs涂层对多环芳烃(PAHs)具有良好的萃取效率,尤其对苯并[a]芘的萃取选择性优于市售聚二甲基硅氧烷纤维和聚丙烯酸酯纤维。在优化条件下,PAHs的线性范围为0.05~200μg/L,相关系数均大于0.999,检出限为0.012~0.134μg/L。对单支纤维日内和日间分析的相对标准偏差(RSDs)分别为4.0%~5.5%和6.0%~6.8%,使用分批组装的5支纤维分析的RSDs为6.4%~7.6%。实际水样分析的加标回收率为84.5%~111.5%。所制备NiTi纤维至少可重复使用250次以上,重现性好。     

Hydrolysis of cephanone in the micelles with different charges

The hydrolysis of cephanone in water and micelles with different charges was studied by UV-vis absorption spectroscopy. The change of pH with the hydrolysis of cephanone was determined. The mechanism of the hydrolysis and the effect of the acidity of the media on the hydrolysis were studied. The results show that the hydrolysis rate of cephanone increases with the acidity. Compared with water, SDS micelles accelerate this hydrolysis, whereas CTAB and Triton X-100 micelles suppress it. The effects of the micelles with different charges on the hydrolysis are explained by the proton concentration of the micro-environment where cephanone exists and by the charge density of the polar group of the cephanone molecules.     

17电子钒开环夹心羰基配合物的合成及XRD,IR,EPR研究

以４种甲基取代戊二烯基为配体合成了４个过渡金属钒开环夹心羰基配合物［２，４－（ＣＨ３）２Ｃ５Ｈ５］２ＶＣＯ（Ｉ），［２，３－（ＣＨ３）２Ｃ５Ｈ５］ＶＣＯ（Ⅱ），［２－ＣＨ３Ｃ５Ｈ６］２ＶＣＯ（Ⅲ）和［３－ＣＨ３Ｃ５Ｈ６］２ＶＣＯ（Ⅳ），其中Ⅱ，Ⅲ，Ⅳ为新配合物，用Ｘ射线单晶衍射，ＩＲ，ＥＰＲ法对所合成配合物进行了结构表征，发现Ｉ具有两种晶相。     

Treatment of coke plant wastewater by A/O fixed biofilm system

The long-term environmental impacts of wastewa-ter from coke plant can be very high, especially due to the discharge of large amounts of wastewater. The composition of coke plant wastewater is complicated and varies from one factory to another, depending …     

PERFORMANCE IMPROVEMENT OF POLYMERS BY THE ADDITION OF GRAFTED NANO-INORGANIC PARTICLES

An irradiation grafting method was applied for the modification of nanoparticles so that the latter can be added topolymeric materials for improving their mechanical performance using existing compounding techniques. The followingitems are discussed in this paper: (a) chemical interaction between the grafting monomers and the nanoparticles duringirradiation, (b) properties including modulus, yield strength, impact strength and fracture toughness of the resultantcomposites, and (c) possible morphological changes induced by the addition of nanoparticles. Though irradiation graftingpolymerization, nanoparticle agglomerates turn into a nano-composite microstructure (comprised of the nanoparticles and thegrafted, homopolymerized secondary polymer), which in turn builds up a strong interfacial interaction with the surrounding,primary polymeric matrix during the subsequent mixing procedure. Due to the fact that different grafting polymers broughtabout different nanoparticle/matrix interfacial features, microstructures and properties of the ultimate composites could thusbe tailored. It was found that the reinforcing and toughening effects of the nanoparticles on the polymer matrix can be fullybrought into play at a rather low filler loading in comparison to conventional particulate filled composites.     

载体γ-Al2O3和钐对非晶态NiB合金热稳定性的影响

用化学还原法制备了NiB、NiB/Al2O3和NiBSm/Al2O3三种催化剂，它们都呈非晶结构.用等离子耦合发射光谱仪(ICP)对催化剂组分进行了分析，采用差示扫描量热法（DSC）对三种催化剂进行了热稳定性分析.结果表明，载体的引入使非晶态NiB合金的体相组成中B的含量降低.将非晶态NiB合金负载到γ-Al2O3上,可以明显改善非晶态合金的热稳定性，少量Sm可以进一步提高晶化温度.晶化激活能数据亦表明了载体和Sm对非晶结构具有良好的稳定作用.载体和Sm可能通过不同的作用提高了非晶态合金的热稳定性.