磺酰胺类常咯啉的分子力学参数的确定

应用量子化学ＭＮＤＯ程序及分子力学ＭＭＰ２程序，确定了一些未知磺酰胺类常咯啉的分子力学参数。应用这些参数计算了几个晶体结构已知的磺酰胺类化合物，与真实结构比较，计算结果令人满意。由此说明确定的分子力学参数用于计算磺酰胺类化合物时的正确性和可行性。     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.     

耐晒大红BBN与表面活性剂双组分光催化降解

以表面活性剂十六烷基三甲基溴化铵(CTAB)和难溶有机颜料耐晒大红BBN(简称BBN)为双组分降解底物, 以TiO2为光催化剂, 研究双组分底物的光催化降解的快慢及规律, 双组分降解的相互影响, 初步建立双组分和催化剂之间的作用模型. 结果表明, pH值及底物的浓度对双组分体系的降解都有显著影响, 碱性条件更适合体系的降解, 在中性(pH=6.8)环境中两种底物的降解效果明显高于单组分的降解. 在碱性条件下(pH=9.2), 加入BBN使CTAB的降解速率略有下降. CTAB的浓度对BBN褪色速率影响较大, 当CTAB 的浓度为1 cmc 时, BBN和CTAB的降解速率都达到最快. BBN在TiO2表面吸附性强, 且被优先降解.     

红外反射及红外—光声光谱法对青铜生锈过程的研究

在自制Cu-Sn-Pb合金表面上进行盐酸腐蚀,用红外反射及红外-光声光谱方法监测粉状锈(Cu_2(OH)_3Cl)的生长过程。结果发现,在酸性环境中Cu_2(OH)_3Cl生长迅速;二价铜锈的生成需通过一价铜锈(CuCl)这一中间产物;粉状锈有传染性,可通过空气由锈蚀样品传至无锈样品,锈体颗粒对光线的散射作用强,结合热力学计算对青铜生锈机理进行了探索。     

Synthesis of Two Novel Rhenium（I） Bipyridyl Photosensitive Dyes

Two novel rhenium(I) 2, 2′-bipyridyl complexes, [(4,4′-di-COOEt-bipy) Re(CO)3 (NCCH3)PF6] and [(4,4′-di-COOEt-bipy) Re (CO)3 (NCS)], a model complex [(4,4′-di-COOEt-bipy) Re (CO)3 (pyridine)PF6], were synthesized. Their ground state electronic spectra and emission spectra were measured in acetonitrile. The MLCT absorption maximum of the complex exhibited a considerable red shift as the ligand changed from pyridine to CNCH3, or SCN.     

Synthesis and X-ray crystal structure of oxamido-bridged heterobinuclear Ni(Ⅱ)-Cu(Ⅱ) complexes

The two complexes [Ni(oxen)Cu(L)2](ClO4)2.xH2O (L=2,2'-bipyridyl(bpy), 1,10-phenanthroline(phen)) have been synthesized, where oxen is N,N'-bis(2-aminoethyl)oxamido di-anion. The crystal structure of [Ni(oxen)Cu(bpy)2](ClO4)2.CH3OH has been determined by X-ray diffraction method. The crystal is triclinic system, space group P1 with a=12.179(1),b=12.298(2), c=11.476(2) A, a=97.57(1), B=97.52(1), 7=80.29(2), V=1669.04(67) A3, Z=2, Dcalcd=1.667 g/cm3. The structure has been refined to final R of 0.076 and Rw of 0.080, respectively. The complexes have an extended oxamido-bridged structure and consist of Ni(Ⅱ) ion in a square planar environment and Cu(Ⅱ) ion in a distorted octahedral environment.     

1-辛烯Ziegler-Natta聚合的活性中心多分散性——分子量分布及动力学的研究

本文通过对TiCl_3-Al(C_2H_5)_3聚合1-辛烯产物的双峰型分子量分布曲线用Schulz函数进行拟合、分峰处理,发现这种双峰型分布中的高分子量峰部分由一种活性中心生成,低分子量峰部分则由至少两种活性中心生成.将不同转化率时聚辛烯的分子量分布分峰拟合数据与聚合速率、活性中心数等测定数据相结合,得到了高分子量和低分子量两部分产物相应的活性中心上各自的动力学参数(增长速率常数、活性中心数、链转移常数等)及各自的聚合速率曲线,从而证实了多种活性中心的存在、它们催化特性的差异及与聚合物分子量分布增宽的关系.     

TiO2-Al2O3复合载体的比较研究

对用混胶法和共沉淀法分别制备的ＴｉＯ２－Ａｌ２Ｏ３复合载体（ＴｉＯ２含量为０．０８ｇ／ｇγ－Ａｌ２Ｏ３）进行了对比研究，采用的表征方法有ＸＲＤ，ＸＲＳ，ＬＲＳ等，得出的结论如下：两种载体均保持了γ－Ａｌ２Ｏ３的骨架结构，但ＴｉＯ２的分散状态不尽相同，混胶样品中ＴｉＯ２主要以表面富集的形式分散在γ－Ａｌ２Ｏ３表面，这有利于集二者的优点于一体，共沉淀样品中ＴｉＯ２趋于整个体相均匀分散，这有利于相互作用     

Studies on the Oxazaborolidine-catalyzed Enantioselective Reduction of 3-Morpholin-4-yl-1-phenyl-1-propanone with Density Functional Theory

Density functional theory (DFT) has been applied to study the enantioselective reduction of 3-morpholin-4-yl-l-phenyl-l-propanone with borane catalyzed by (S)-4-benzyl-5,5-diphenyl-l,3,2-oxazaborolidine at the B3LYP/6-31G* level. All molecular species involved in the four reaction steps have been fully optimized and the structural parameters are provided, and the micro process of reaction was also investigated. The catalyst-alkoxyborane adduct formed in step Ⅲ exhibits a B-O-B-N tetra-atomic ring. Reaction coordination calculations show that BH3 can react with 3-morpholin-4-yl-l-phenyl-l-propanone spontaneously, resulting in the need of 2 tool BH3 in the reaction.