Tomographic reconstruction of shock layer flows

The tomographic reconstruction of supersonic flows faces two challenges. Firstly, techniques used in the past, such as the direct Fourier method (DFM) (Gottlieb and Gustafsson in On the direct Fourier method for computer tomography, 1998; Morton in Tomographic imaging of supersonic flows, 1995) or various backprojection (Kak and Slaney in Principles of computerized tomographic imaging, vol. 33 in Classics in Applied Mathematics, 2001) techniques, have only been able to reconstruct areas of the flow which are upstream of any opaque objects, such as a model. Secondly, shock waves create sharp discontinuities in flow properties, which can be difficult to reconstruct both in position and in magnitude with limited data. This paper will present a reconstruction method, matrix inversion using ray-tracing and least squares conjugate gradient (MI-RLS), which uses geometric ray-tracing and a sparse matrix iterative solver (Paige and Saunders in ACM Trans. Math. Softw. 8(1):43–71, 1982) to overcome both of these challenges. It will be shown, through testing with a phantom object described in tomographic literature, that the results compare favourably to those produced by the DFM technique. Finally, the method will be used to reconstruct three-dimensional density fields from interferometric shock layer images, with good resolution (Faletič in Tomographic reconstruction of shock layer flows, 2005). This paper was based on work that was presented at the 3rd International Symposium on Interdisciplinary Shock Wave Research, Canberra, Australia, March 1–3, 2006.     

Analytical approximation to large-amplitude oscillation of a non-linear conservative system

This paper deals with non-linear oscillation of a conservative system having inertia and static non-linearities. By combining the linearization of the governing equation with the method of harmonic balance, we establish analytical approximate solutions for the non-linear oscillations of the system. Unlike the classical harmonic balance method, linearization is performed prior to proceeding with harmonic balancing, thus resulting in a set of linear algebraic equations instead of one of non-linear algebraic equations. Hence, we are able to establish analytical approximate formulas for the exact frequency and periodic solution. These analytical approximate formulas show excellent agreement with the exact solutions, and are valid for small as well as large amplitudes of oscillation.     

Drying performance and surface forces of a pair of impinging radial jets

The drying performance and the forces generated by a pair of radial jets impinging on a plane surface are studied experimentally and compared with a pair of in-line (axial) jets. The reattachment rings of the radial jets are visualized by liquid-crystal-thermography. The results of the drying experiments are presented in terms of Sherwoodnumbers. The results of the surface force measurements are presented in terms of force coefficients. The effects of flow exit angle, exit velocity, horizontal nozzle spacing and vertical nozzle to surface distance on mass transfer and net surface force are discussed. Results show that drying performance of a pair of radial jets with an exit angle towards the surface of 10° is 18% higher than that of a pair of in-line jets. The surface force of impinging radial jets depends on the exit angle. A global pressure force on the surface is typical for jets directed towards the surface, while a global lifting force is found when the jet is initially directed away from the surface. Radial jets have a high potential in drying applications for force sensitive products and when high drying rates and/or small suction forces are of interest.     

Sinkviskosimeter zur Bestimmung der Viskosität von Kunststoffschmelzen unter hydrostatischem Druck

Zusammenfassung Es wird ein Sinkviskosimeter zur Messung der Viskosität von Polymerschmelzen unter hydrostatischem Druck beschrieben. Von zwei angefügten Meßbeispielen behandelt das eine die Druckabhängigkeit der Viskosität von Polystyrol- und Polyäthylenschmelzen, das andere die Viskosität von Polystyrolschmelzen mit niedermolek ularen Zusätzen.

---

Summary A viscometer of the falling cylinder type for measuring the viscosity of polymer melts under pressure is described. The applicability of this viscometer is shown by measuring the influence of hydrostatic pressure and of blowing agents on the viscosity of polymer melts.

---

---

Mit 8 Abbildungen und 2 Tabellen     

Single specimen determination of Young's and bulk moduli of polymers

Summary A new method is presented for the rapid and consecutive determination of theYoung's and bulk moduli of polymeric solids in compression loading. Usually these properties are determined by separate measurements. However, by using an undersized specimen in a standard bulk compressibility tester, it is possible to determine both moduli on the same specimen in a single test procedure. Initial loading of the undersized specimen results in a decrease in length and an increase in diameter. From these changes,Young's modulus may be calculated. Once the bore of the tester is filled, the application of additional pressure results in a decrease in the volume of the polymer from which the bulk modulus may be calculated. Both determinations may be made within minutes. The moduli values are in general agreement with published values and the calculated values for Poisson's ratio fall into the expected range.

---

Zusammenfassung Es wird eine neue Methode vorgestellt für die schnelle und fortlaufende Bestimmung des Elastizitäts- und Kompressions-Modul us polymerer Festkörper bei einer Druckbelastung. Normalerweise werden diese Eigenschaften durch unterschiedliche Methoden bestimmt. Durch Benutzung einer unterdimensionierten Probe in einem Standard-Kompressionsprüfgerät ist es möglich, beide Moduln an der gleichen Probe in einem einzigen Versuch zu ermitteln. Die Anfangsbelastung einer unterdimensionierten Probe führt zu einer Längenabnahme und einer Zunahme des Durchmessers. Aus diesen Änderungen läßt sich der Elastizitätsmodul berechnen. Sobald die Bohrung des Gerätes gefüllt ist, führt die Erhöhung des Druckes zu einer Volumen-Abnahme des Polymers, aus dem sich der Kompressionsmodul berechnen läßt. Beide Bestimmungen können in wenigen Minuten durchgeführt werden. Die Modulwerte stimmen im allgemeinen mit veröffentlichten Werten überein, und die für dasPoisson-Verhältnis ermittelten Werte liegen in dem erwarteten Bereich.

     

The ductile fracture of polycarbonate

The fracture of a known ductile polymer (polycarbonate) is investigated. It is shown that polycarbonate obeys the Dugdale model of ductile yielding by comparing measured plastic-zone sizes and displacements to the theoretical predictions. Strain-energy release rates are calculated and the critical value is shown to be one or two orders of magnitude higher than critical values for brittle polymers. Photoelastic photographs of the fracture process are presented and it is shown that the photoelastic effect definitely enhances the definition of the yield zone. Microscopic photoelastic photographs are also presented which are used to give a new interpretation to the photoplastic effect. Finally, suggestions for future work are presented.     

Some Features of a Turbulent Separated Flow and Heat Transfer Behind a Step and a Rib. 1. Flow Structure

The influence of the shape and size of the obstacle on separated flow and heat transfer is studied experimentally. Results of investigation and comparative analysis of the hydrodynamic structure of a separated flow behind a step and a rib are presented. A principally different character of transfer processes in the separated flow behind obstacles of these types is demonstrated. The flow structure in the secondary vortex region is considered.     

Influence of Molecular Characteristics of a Substance on Detonation Phenomena

In the present study, the molecular-dynamics method has been used to examine the influence of the thermal effect of the chemical reaction on processes in a detonating molecular crystal (propagation velocity and structure of the detonation wave, delay time of the chemical reaction, and energy macrocharacteristics of the crystal in the disturbed region). Molecular-dynamics data are compared with predictions of the continuum theory of detonation; in particular, fulfillment of the Chapman–Jouguet condition is verified.     

Effect of nonlinear constitutive equation on vibrations of beams

Summary This paper is concerned with the analytical investigation of static and dynamic nonlinear behaviors of beams with different boundary conditions. While geometric type of nonlinearities on beams have been investigated extensively, material type nonlinearities have received very little attention. Therefore, material nonlinearities of the Ramberg-Osgood type are considered in this analysis. The use of Self-Generating functions for nonlinear beam problems is demonstrated for this type of nonlinearity. Transverse shear and rotatory inertia effects have been included in the formulation to study moderately thick beams. For all the cases investigated here nonlinear frequency ratios are calculated at various amplitudes of vibration and geometric parameters of beams. Numerical results indicate that the Ramberg-Osgood type nonlinearity produces softening-type responses. The study is limited to materials which are nonlinearly elastic and the effect of geometric nonlinearity is not considered in this paper.

---

Sommario Questo lavoro riguarda lo studio dei comportamenti non lineari statici e dinamici di travi con diverse condizioni a contorno. Mentre le non linearità di tipo geometrico sono state studiate estesamente, quelle di tipo non lineare hanno ricevuto un'attenzione molto ridotta. Perciò in questa ultima analisi si considerano non linearità materiali del tipo di Ramberg-Osgood. Si dimostra uso delle funzioni autogeneratrici nei problemi non lineari per le travi con questo tipo di non linearità. Nella formulazione dello studio di travi moderatamente spesse si sono inclusi effetti di taglio e inerzia rotatoria. Per tutti i casi qui studiati si calcolano i rapporti di frequenza non lineare per varie ampiezze di vibrazione e parametri geometrici delle travi. I risultati numerici indicano che la non linearità del tipo di Ramberg-Osgood produce risposte del tipo ammorbidimento. Lo studio si limita a materiali con nonlinearità elastica e non si considera nel lavoro l'effetto della non linearitá geometrica.

---

List of symbols T _s Transverse shear - k ₁ Shear connection factor - A, B, m Material constants - I Moment of inertia - G Shear modulus - Mass per unit length - w Lateral displacement - h Beam thickness - b Bredth of beam - t Time - R _i Rotatory inertia - a Area of cross-section of beam - q(x) Lateral load on beam - _x Stress - _x Strain - Length of beam - x Beam coordinate - - r Radius of gyration - w Nondimensional maximum deflectionw _max/r - q ₀ ^* Nondimensional load, (q ₀ ³/Al - Thickness parameter,h/ - (T _sK₁/Ga) - ₀ Linear frequency - Nonlinear frequency - w _max w measured at the point of maximum deflection.