Search for the emission of π<Superscript>0</Superscript> mesons from the neutron-induced fission of <Superscript>235</Superscript>U nuclei

A nuclear-reactor experiment on the search for the emission of neutral pions from the neutron-induced fission of ²³⁵U nuclei has been carried out. To this end, an experimental setup for searching for the emission of π⁰ mesons with high sensitivity to this process has been designed and produced. This setup consisted of two Cherenkov total-absorption spectrometers for the detection and measurements of the energy of two gamma-ray photons from π ⁰-meson decay. The spectrometers were placed at the exits of two coaxial horizontal experimental channels. To protect the detectors from low-energy β and γ rays and neutron fluxes, 3.5-m-long water filters were situated in the channels. To reject the cosmic background, large-area scintillation counters operating in the anticoincidence mode were placed over each spectrometer. The energy and time resolution of the spectrometers, as well as the efficiency of detecting charged particles by scintillation counters, were tested on the secondary electron beam of the Tomsk electron synchrotron Sirius. Runs of measurements of the effect on the operating reactor (duration of 805 h) were alternated with runs of measurements of background on the stopped reactor (duration of 403 h). Statistical processing of the experimental results yields an upper limit of ≤5.3×10 ^?12 with a 90% confidence level for the probability of the emission of neutral pions from the neutron-induced fission of ²³⁵U nuclei. This result and results of other works carried out with sources of spontaneously fissioning ²⁵²Cf nuclei show that the probabilities of the emission of π⁰ mesons from spontaneous fission and fission induced by fission-spectrum neutrons are equal to each other.     

Fracture strength of class II slot cavities restored with polymerizable restorative materials

This study compared the fracture strength of Class II slot cavities restored with polymerizable restorative materials. Sixty, caries-free, posterior teeth were divided into five groups of 12 teeth. The Class II slot cavities were prepared. The teeth were restored with two packable composites (Filtek P60, Surefil), a microhybrid composite (Filtek Z250)and two ormocer (Definite, Admira). The restorations were then subjected to fracture resistance tests. The marginal ridges of the restorations were loaded at an angle of 13.5° to the long axis of the tooth in an Universal Testing Machine until failure. Analysis of mean forces indicated that, Filtek P60, Surefil and Filtek Z250 exhibited better performance than Definite and Admira. The tested resin composites differed in their mechanical properties. This study suggested that fracture behavior were highly influenced by the filler system. Overall, Filtek P60, Surefil, Filtek Z250, demonstrated good fracture resistance. Copyright © 2003 John Wiley & Sons, Ltd.     

Density Profiles in a Quantum Coulomb Fluid Near a Hard Wall

Journal of Statistical Physics - Equilibrium particle densities near a hard wall are studied for a quantum fluid made of point charges which interact via Coulomb potential without any...     

Limit Regimes of Braking of Disc-Type Composite Flywheels Made by Filament Winding

A set of invariants describing the limit regimes of braking disk-type wound composite flywheels is suggested. The limit regime is determined by using a linear failure criterion. It is shown that, for generating short-time impulses of very high power, a set of small identical flywheels is more effective than one large flywheel with an equivalent mass. Particular examples illustrating the theory considered are discussed.     

Nonlinear electrohydrodynamic instability of a finitely conducting cylinder: Effect of interfacial surface charges

The nonlinear electrohydrodynamic stability of cylindrical interface, supporting surface charge, among two conducting fluids is investigated. The two fluids are subjected to a radial electric field. The analysis based on the multiple scale technique. It is shown that the evolution of the amplitude is governed by two partial differential equations. These equations are combined to yield two alternate Schrödinger equations with cubic nonlinearity. One of which calculates the nonlinear cutoff electric field, separating stable and unstable disturbances, while the other is used to analyze the stability of the system. The stability criteria are analytically discussed and numerically confirmed. Numerical calculations resulted in set of graphs to indicate the stability picture of the considered system.     

First order dynamic inclusions on time scales

In this paper, we study existence of solutions of first order dynamic inclusions on time scales with general boundary conditions. Both the ∇-derivative and Δ-derivative cases are considered. Examples are presented to illustrate that the Δ-derivative case needs more restrictive assumptions.     

Furtivity and Masking Problems in Time-Dependent Electromagnetic Obstacle Scattering

In this paper, we consider furtivity and masking problems in time-dependent three-dimensional electromagnetic obstacle scattering. That is, we propose a criterion based on a merit function to minimize or to mask the electromagnetic field scattered by a bounded obstacle when hit by an incoming electromagnetic field and, with respect to this criterion, we drive the optimal strategy. These problems are natural generalizations to the context of electromagnetic scattering of the furtivity problem in time-dependent acoustic obstacle scattering presented in Ref. 1. We propose mathematical models of the furtivity and masking time-dependent three-dimensional electromagnetic scattering problems that consist in optimal control problems for systems of partial differential equations derived from the Maxwell equations. These control problems are approached using the Pontryagin maximum principle. We formulate the first-order optimality conditions for the control problems considered as exterior problems defined outside the obstacle for systems of partial differential equations. Moreover, the first-order optimality conditions derived are solved numerically with a highly parallelizable numerical method based on a perturbative series of the type considered in Refs. 2–3. Finally, we assess and validate the mathematical models and the numerical method proposed analyzing the numerical results obtained with a parallel implementation of the numerical method in several experiments on test problems. Impressive speedup factors are obtained executing the algorithms on a parallel machine when the number of processors used in the computation ranges between 1 and 100. Some virtual reality applications and some animations relative to the numerical experiments can be found in the website http://www.econ.unian.it/recchioni/w10/.     

Finding Robust Solutions Using Local Search

This paper investigates how a local search metaheuristic for continuous optimisation can be adapted so that it finds broad peaks, corresponding to robust solutions. This is relevant in problems in which uncertain or noisy data is present. When using a genetic or evolutionary algorithm, it is standard practice to perturb solutions once before evaluating them, using noise from a given distribution. This approach however, is not valid when using population-less techniques like local search and other heuristics that use local search. For those algorithms to find robust solutions, each solution needs to be perturbed and evaluated several times, and these evaluations need to be combined into a measure of robustness. In this paper, we examine how many of these evaluations are needed to reliably find a robust solution. We also examine the effect of the parameters of the noise distribution. Using a simple tabu search procedure, the proposed approach is tested on several functions found in the literature. This revised version was published online in August 2006 with corrections to the Cover Date.