Diastereoselective 14beta-hydroxylation of baccatin III derivatives

14beta-Hydroxybaccatin III, a compound with limited availability by natural sources, is the starting material for the synthesis of the second-generation anticancer taxoid ortataxel. The 7-tert-butoxycarbonyl (1a) and 7-triethylsilyl (1b) derivatives of 14beta-hydroxybaccatin III 1,14-carbonate were synthesized from 10-deacetylbaccatin III (3). The crucial steps were (a) the C(14)beta hydroxylation of the corresponding 13-oxobaccatin III derivatives by oxaziridine-mediated electrophilic oxidation and (b) the reduction of the C(13) carbonyl group with sodium or alkylammonium borohydrides. This protocol provides a practical way for the semisynthesis of ortataxel from 10-deacetylbaccatin III, a compound readily available from various yews.     

Phenol Photonitration and Photonitrosation upon Nitrite Photolysis in basic solution

Nitrophenols have been detected in some Antarctic lakes, the water of which is basic and rich in nitrate, nitrite and other nutrients. Nitrate or nitrite photolysis could be a possible reaction to explain the presence of these compounds. This work presents evidence for the formation of 2-nitrophenol (2NP), 4-nitrophenol (4NP) and 4-nitrosophenol (4NOP) upon UV irradiation of phenol and nitrite in aerated basic solutions.

The pH dependence of the 2NP initial formation rate is different from those of 4NP and 4NOP. The dependence of the first mainly reflects the phenol/phenolate equilibrium, with phenol yielding 2NP at a higher rate than phenolate. In the case of 4NOP, the initial formation rate vs pH has a maximum at pH 9.5. The pH dependence of 4NOP formation rate suggests that three pathways are likely to operate: nitrosation of undissociated phenol by N₂O₃, prevailing at pH<8.7, nitrosation of phenolate by N₂O₃, prevailing in the pH interval 8.7–10.8, and reaction between phenoxyl radical and ^?NO, prevailing at pH>10.8. Phenol nitrosation by N₂O₃ is favoured when phenol is negatively charged (phenolate), but it is also disfavoured at alkaline pH values, owing to the depletion of N₂O₃ (the nitrosating agent) by basic hydrolysis. Differently from 2NP, the initial formation rate vs pH of 4NP is very similar to that of 4NOP, suggesting that 4NP may originate from the oxidation of 4NOP. Moreover, while in neutral and acidic solutions the formation rate of 2NP is slightly higher than that of 4NP, in the pH interval 8–12 the formation of 4NP is much more rapid than that of 2NP. This indicates that the pH of natural waters influences the ratio of nitroisomers.     

Thiocarbonylthio end group removal from RAFT‐synthesized polymers by a radical‐induced process

The removal of thiocarbonylthio end groups by radical‐addition‐fragmentation‐ coupling from polymers synthesized by RAFT polymerization has been studied. We found that a method, which involves heating the polymer with a large excess (20 molar equivalents) of azobis(isobutyronitrile) (AIBN), while successful with methacrylic polymers, is less effective with styrenic or acrylic polymers and provides only partial end group removal. This is attributed to the propagating radicals generated from the latter polymers being poor radical leaving groups relative to the cyanoisopropyl radical. Similar use of lauroyl peroxide (LPO) completely removes the thiocarbonylthio groups from styrenic or acrylic polymers but, even with LPO in large excess, produces a polymer with a bimodal molecular weight distribution. The formation of a peak of double molecular weight is indicative of the occurrence of self‐termination and ineffective radical trapping. We now report that by use of a combination of LPO (2 molar equivalents) and AIBN (20 molar equivalents) we are able to completely remove thiocarbonylthio end groups of styrenic or acrylic polymers and minimize the occurrence of self termination. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6704–6714, 2009     

Aqueous photopolymerization with visible‐light photoinitiators: Acrylamide polymerization photoinitiated with a phenoxazine dye/amine system

We studied the photoinduced electron‐transfer polymerization of acrylamide with, as a visible‐light initiator, the heterocycle‐N‐oxide resazurin in the presence of triethanolamine. The irradiation of resazurin produces resorufin, which also absorbs in the visible region. Both phenoxazine dyes in the presence of the amine are efficient photoinitiators of acrylamide polymerization in an aqueous medium. The polymerization rates were measured at several amine concentrations. These values increase with the amine concentration, reaching a maximum value; further amine addition slightly decreases the polymerization rate. Time‐resolved photolysis studies of the dyes were carried out under the polymerization conditions. The quenching of the dye excited states by the amine was analyzed with static‐fluorescence and laser‐flash photolysis. These data were used for fitting curves of the polymerization rate versus the amine concentration, and it was concluded that the interaction of triplet excited dyes with the amine leads to acrylamide polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4074–4082, 2001     

An ecogenetic model

A model for the effects of a predator on a genetically distinguished prey population is formulated and investigated. The predator-free system settles at an equilibrium which can be destabilized by the predators if a suitably defined parameter, the predator invasion number, exceeds a threshold. The system can then coexist at a stable equilibrium or via persistent oscillations.     

Plane algebraic curves with many cusps,with an appendix by Eugenii Shustin

The maximum number \(k(d)\) of cusps on a plane algebraic curve of degree \(d\) is an open classical problem that dates back to the nineteenth century. A related open problem is the asymptotic value ( \(a.v.\) ) of the number of cusps on plane curves, that is \(a.v.=\limsup _{d\rightarrow \infty } k(d)/{d^2}\) . In this paper, we improve the best known lower bound for the asymptotic value by constructing curves with the largest known number of cusps for infinitely many degrees. Some particular curves of relatively low degree with many cusps are constructed too. The “Appendix” to this paper is devoted to the case of degree 11 and it is due to E. Shustin.     

Method development for simultaneous multi-element determination of hydride forming elements (As, Bi, Ge, Sb, Se, Sn) and Hg by microwave induced plasma-optical emission spectrometry using integrated continuous-microflow ultrasonic nebulizer-hydride generator sample introduction system

The analytical potential of a coupled continuous-microflow ultrasonic nebulizer dual capillary system (µ-USN/DCS)–Ar/He mixed gas microwave induced plasma-optical emission spectrometry (MIP-OES) has been evaluated for the purpose of determination of hydride forming elements (As, Bi, Ge, Sb, Se, Sn) and a vapor element (Hg). A univariate approach and the simplex optimization procedure were used to achieve optimized conditions and derive analytical figures of merit. Analytical performance of the ultrasonic nebulization system was characterized by determination of the limits of detection (LODs) and precision (RSDs) with the µ-USN/DCS observed at a 15 µL min^{− 1} flow rate. At flows of ≤ 15 µL min^{− 1}, solvent loading in the plasma is sufficiently low to make desolvation unnecessary. The experimental concentration detection limits for simultaneous determination, calculated as the concentration giving a signal equal to three times of the standard deviation of the blank (LOD, 3σ_blank criterion, peak height) were 1.2, 5.4, 6.3, 1.8, 3.3, 2.4 and 3.0 ng mL^{− 1} for As, Bi, Ge, Sb, Se, Sn and Hg, respectively. The method offers relatively good precision (RSD ranged from 8 to 11%) for liquid analysis and microsampling capability. Interference effects by transition metals have been shown to be corrected by the addition of thiourea, as a pre-reducing agent and masking agent. The accuracy of the method was verified using certified reference materials (DOLT-2, GBW 07302, SRM 2710, and SRM 1643e) and by the aqueous standard calibration technique. The measured contents of elements in reference materials were in satisfactory agreement with the certified values.     

Production of high purity TeO2 single crystals for the study of neutrinoless double beta decay

High purity TeO₂ crystals are produced to be used for the search for the neutrinoless double beta decay of ¹³⁰Te. Dedicated production lines for raw material synthesis, crystal growth, and surface processing were built compliant with radio-purity constraints specific to rare event physics experiments. High sensitivity measurements of radio-isotope concentrations in raw materials, reactants, consumables, ancillaries, and intermediary products used for TeO₂ crystals production are reported. Indications are given on the crystals perfection and how it is achieved and maintained in a large scale production process. Production and certification protocols are presented and resulting ready-to-use TeO₂ crystals are described.     

A New Light on Nets of C*-Algebras and Their Representations

The present paper deals with the question of representability of nets of C*-algebras whose underlying poset, indexing the net, is not upward directed. A particular class of nets, called C*-net bundles, is classified in terms of C*-dynamical systems having as group the fundamental group of the poset. Any net of C*-algebras has a canonical morphism into a C*-net bundle, the enveloping net bundle, which generalizes the notion of universal C*-algebra given by Fredenhagen to nonsimply connected posets. This allows a classification of nets; in particular, we call injective those nets such that the canonical morphism is faithful. Injectivity turns out to be equivalent to the existence of faithful representations. We further relate injectivity to a generalized Čech cocycle of the net, and this allows us to give examples of nets exhausting the above classification.     

First measurement of the partial widths of 209Bi decay to the ground and to the first excited states

209Bi alpha decay to the ground and to the first excited state have been recently observed for the first time with a large BGO scintillating bolometer. The half-life of 209Bi is determined to be τ(1/2)=(2.01±0.08)×10(19) yr while the branching ratio for the ground-state to ground-state transition is (98.8±0.3)%.