Sensor Platform with a Custom‐tailored Aptamer for Diagnosis of Synthetic Cannabinoids

Synthetic cannabinoids (SCs) are the large group of abused drugs and detection of them is still a challenge. Hence, new methods for analysis of SCs are being investigated. We aimed to develop a novel system for selective analysis of SCs. First, various custom‐tailored aptamers against the target SCs were selected through GO‐SELEX process. Toggling between different SC analytes during successive rounds of selection was performed to generate cross‐reactive aptamers. Then, the amino‐capped aptamers were synthesized and easily attached to the cysteamine‐covered gold electrodes. Analytical parameters and selectivity of the aptasensors were compared by using electrochemical techniques. After comparison of the analytical features and selectivity towards target analytes, one of the aptamers designated as Apta‐1 was chosen for further measurements. The aptasensor was tested by using differential pulse voltammetry technique against JWH‐018 (5‐pentanoic acid), selected as a model for SCs. The linearity and limit of detection were determined as 0.01–1.0 ng/mL and 0.036 ng/mL. Finally, sample application in synthetic urine samples was successfully performed with standard addition method, as confirmed by LC‐QTOF/MS. JWH‐018 (4‐hydroxypentyl), JWH‐073 (3‐hydroxybutyl), JWH‐250 (5‐hidroxypentyl) and HU‐210 were used to test the selectivity of the aptasensor and the system was shown to recognize all these SCs. Also other illegal drugs did not significantly interfere with the signal responses.     

Synthesis and dichromate anion extraction ability of p-tert-butylcalix[4]arene diamide derivatives with different binding sites

The article describes the synthesis and evaluation of the dichromate anion (Cr₂O₇²⁻/HCr₂O₇⁻) extraction properties of p-tert-butylcalix[4]arene diamide derivatives (5-7) containing different binding sites. Among these compounds, 6 and 7 have been synthesized via aminolysis in a toluene-methanol solvent system with 3-aminomethylpyridine and 3,6-dioxa-1,8-diamino octane, respectively. On the other hand, compound 5 has been synthesized via an acid chloride method due to its inefficiency under aminolysis. The extraction properties of these diamides toward dichromate anions are studied by liquid-liquid extraction. The results show that p-tert-butylcalix[4]arene diamide derivative 7 exhibited a much higher affinity toward dichromate anions than that of 6 due to its special structure, while 5 was an ineffective ligand for these anions.     

Recent Studies on Berry Bioactives and Their Health-Promoting Roles

Along with the increased knowledge about the positive health effects of food bioactives, the eating habits of many individuals have changed to obtain higher nutritional benefits from foods. Fruits are among the most preferred food materials in this regard. In particular, berry fruits are important sources in the diet in terms of their high nutritional content including vitamins, minerals, and phenolic compounds. Berry fruits have remedial effects on several diseases and these health-promoting impacts are associated with their phenolic compounds which may vary depending on the type and variety of the fruit coupled with other factors including climate, agricultural conditions, etc. Most of the berries have outstanding beneficial roles in many body systems of humans such as gastrointestinal, cardiovascular, immune, and nervous systems. Furthermore, they are effective on some metabolic disorders and several types of cancer. In this review, the health-promoting effects of bioactive compounds in berry fruits are presented and the most recent in vivo, in vitro, and clinical studies are discussed from a food science and nutrition point of view.     

Synthesis of Ni/Al2O3 catalysts via alkaline polyol method and hydrazine reduction method for the partial oxidation of methane

Nickel catalysts supported on γ-Al₂O₃ were synthesized in the presence of polyvinylpyrrolidone (PVP) using both alkaline polyol method and hydrazine reduction method while fixing the weight ratio of [(PVP)]/[Ni(CH₃COO)₂·4H₂O] at 2. The effects of hydrazine [N₂H₅OH]/[Ni] and [NaOH]/[Ni] molar ratios on the structural properties of the catalysts were characterized by transmission electron microscopy (HRTEM) and by X-ray diffraction (XRD). The average of monodispersed Ni nanoparticles ranged between 8.0 and 13.0 nm. The catalytic tests were performed for the partial oxidation of methane in the temperature range of 600–800 °C under a flow rate of 157,500 L kg^–1 hr^–1 with CH₄/O₂= 2. At the molar ratio of [NaOH]/[Ni] = 2, the resultant nickel nanoparticles on alumina was established completely without impurities; thus, it demonstrated the highest catalytic activity, 88% for CH₄ conversion, and H₂ selectivity, 90.60%. The optimum [N₂H₅OH]/[Ni] ratio was determined as 4.1, which means a good catalytic performance and 89.35% selectivity to H₂ for the partial oxidation of methane.     

Modeling the Dynamics of Protein–Protein Interfaces,How and Why?

Protein–protein assemblies act as a key component in numerous cellular processes. Their accurate modeling at the atomic level remains a challenge for structural biology. To address this challenge, several docking and a handful of deep learning methodologies focus on modeling protein–protein interfaces. Although the outcome of these methods has been assessed using static reference structures, more and more data point to the fact that the interaction stability and specificity is encoded in the dynamics of these interfaces. Therefore, this dynamics information must be taken into account when modeling and assessing protein interactions at the atomistic scale. Expanding on this, our review initially focuses on the recent computational strategies aiming at investigating protein–protein interfaces in a dynamic fashion using enhanced sampling, multi-scale modeling, and experimental data integration. Then, we discuss how interface dynamics report on the function of protein assemblies in globular complexes, in fuzzy complexes containing intrinsically disordered proteins, as well as in active complexes, where chemical reactions take place across the protein–protein interface.     

Ca3[BN2]I3: The First Halide‐Rich Alkaline Earth Nitrido­borate with Isolated [BN2]3– Units

The title compound Ca₃[BN₂]I₃ was obtained from reactions of mixtures of the starting materials Ca₃[BN₂]₂ and CaI₂ in a 1:4 ratio in sealed Nb tubes at 1223 K. The crystal structure was solved from powder synchrotron diffraction data. Ca₃[BN₂]I₃ is the first example of a halide‐rich nitridoborate crystallizing in the rhombohedral space group R32 [no. 155, Pearson code: hR96; Z = 12; a = 16.70491(2) Å, c = 12.41024(2) Å]. The crystal structure is built up by two interpenetrating networks of condensed edge‐sharing [BN₂]@Ca₆ and [□]@I₆ trigonal antiprisms (□ = void). In Ca₃[BN₂]I₃ two crystallograhically distinct [BN₂]^3– anions are present with d(B1–N) = 1.393(2) Å and d(B2–N) = 1.369(9) Å. Their bond angles are practically linear, varying only slightly: N–B1–N = 179(1)° and N–B2–N = 180°. Vibrational spectra were interpreted based on the D_∞h symmetry of the discrete linear [N–B–N]^3– moieties, considering the site symmetry reduction and the presence of two distinct [BN₂]^3– groups.     

Direct enantioselective aldol reactions catalyzed by calix[4]arene-based l-proline derivatives in the water

Two novel p-tert-butylcalix[4]arene-based chiral organocatalysts derived from l-proline have been developed to catalyze direct aldol reactions between cyclohexanone and aromatic aldehydes in water. Under the optimal conditions, high yields (up to 95%), enantioselectivities (up to 90%), and moderate diastereoselectivities (up to 65:35) were obtained. Considering the catalytic inefficiency of sole proline for the aldol reaction in water, these results clearly display the enormous effect of the hydrophobic part of calix[4]arene of compound A.     

Free‐standing Graphene/Poly(methylene blue)/AgNPs Composite Paper for Electrochemical Sensing of NADH

Highly flexible graphene/poly(methylene blue)/AgNPs composite paper was successfully prepared for amperometric biosensing of NADH. For this purpose, a dispersion including graphene oxide (GO), methylene blue (MB) and silver nanoparticles (AgNPs) was prepared and GO/MB/AgNPs paper was acquired by vacuum‐filtration of this dispersion through a suitable membrane. After peeling it off from membrane, it was transformed to rGO/MB/AgNPs paper by performing reduction with hydriodic acid. In a three‐electrode cell, which is containing 0.1 M phosphate buffer solution (pH: 9.0), rGO/MB/AgNPs paper was used as working electrode and rGO/poly(MB)/AgNPs composite paper was generated by surface‐confined electropolymerization of MB using successive cyclic voltammetry approach in a suitable potential window. Characterization of this composite paper was carried out by using scanning electron microscopy, scanning tunneling microscopy, X‐ray photoelectron spectroscopy, powder X‐ray diffraction spectroscopy, Raman spectroscopy, four‐point probe conductivity measurement and cyclic voltammetry techniques. Flexible rGO/poly(MB)/AgNPs composite paper has demonstrated high sensitivity, wide linear range and low detection limit for amperometric quantification of NADH.