Investigation of morphology selection for CBr_4-C_2Cl_6 alloy in three dimensions with multi-phase field method

With the multi-phase field model, the unidirectional solidification with constant velocity growth and variable velocity growth of the CBr4-C2Cl6 eutectic alloy is simulated in three dimensions. The simulated results with constant velocity growth show that with the increase of pulling velocity, the morphology of the CBr4-C2Cl6 alloy evolves in the sequence of lamellar merging →lamellar-rod transition→stable lamellar growth→oscillating growth→lamellar branching. A morphology selection map is established with ...     

Efficient preparation of a four-photon cluster state with homodyne measurement via cross-Kerr nonlinearity

A scheme is proposed for generating a multiphoton entangled cluster state among four modes. The scheme only uses Kerr medium, beam splitter and homodyne measurements on coherent light fields, which can be efficiently made in quantum optical laboratories. The photon in the signal mode is prepared in a superposition state of the vacuum state and one-photon state while the probe beam is initially set in a coherent state superposition. The strong probe mode interacts successively with multiple signal-mode photo...     

Accumulation effect of SiO_2 protective layer on multi-shot laser-induced damage in high-reflectivity HfO_2/SiO_2 coatings

The accumulation effects in high-reflectivity(HR) HfO2/SiO2 coatings under laser irradiation are investigated.The HR HfO2/SiO2 coatings are prepared by electron beam evaporation at 1 064 nm.The laser-induced damage threshold(LIDT) are measured at 1 064 nm and at a pulse duration of 12 ns,in 1-on-1 and S-on-1 modes.Multi-shot LIDT is lower than single-shot LIDT.The laser-induced and native defects play an important role in the multi-shot mode.A correlative theory model based on critical conduction band electron density is constructed to elucidate the experimental phenomena.     

退火温度对YBa2Fe3O8的结构与磁性质影响分析

YBa2Fe3O8(YBFO)是具有三方钙钛矿结构的反铁磁(AFM)体,研究它的结构和磁性质对于我们认识三方钙钛矿结构具有重要作用.目前,关于固相法制备YBFO中退火温度方面的研究并不多,而控制退火温度是这种工艺中的重要环节.为制备高含量的YBa2Fe3O8,本文分别在760℃、950℃和1100℃退火温度下,采用固相...     

两种钌配合物皮秒发光动力学过程研究

采用稳态发光光谱、瞬态发光动力学测量等手段,对两种钉配合物[Ru(bpy)3](ClO4)2和[Ru(bpy)2 HPIP](ClO4)2的发光性质进行了研究.稳态发光光谱表明[Ru(bpy)2 HPIP](ClO4)2发光明显偏弱;皮秒瞬态发光动力学测量显示[Ru(bpy)2 HPIP](ClO4)2的激发态弛豫过程...     

Coral reef-like polyanaline nanotubes prepared by a reactive template of manganese oxide for supercapacitor electrode

Coral reef-like PANI nanotubes composed of nanopaticles were successfully synthesized by a reactive template of manganese oxide.The structure was characterized by using SEM,TEM,and FT-IR,and the supercapacitive behaviors of these nanotubes were investigated with cyclic voltammetry（CV）,and charge-discharge tests,respectively.A maximum specific capacitance of 533 F/g could be achieved in 1mol/L aqueous H₂SO₄ with the potential range of -0.2 to 0.8 V（vs.the saturated calomel electrode） in a half-cell setup configuration for PANI electrode,suggesting its potential application in the electrode material for electrochemical capacitors.     

Prediction of Decomposition Temperature for Lanthanide Complexes Involving Cyclopentadienyl and Benzohydroxamic Acid Ligand by ANNs

The decomposition temperatures of the lanthanide organic complexes(η^5-C5H5)2Ln(C6H5CONHO)involving cyclopentadienyl and benzohydroxamic acid ligands were calculated and predicted by the model based on ANNs(artificial neural netowrks)method.The comparison was carried out between results from ANNs method and traditinal regression method.It is proved that ANNs could be used more efficiently for the prediction of decomposition temperature of lanthanide organic complexes.     

交联壳聚糖树脂对部分尿毒症毒物的吸附性能研究

用反向悬浮的方法制备了戊二醛交联壳聚糖树脂吸附剂,并对制得的球形吸附剂用NaBH4进行了氢化还原处理,以提高其在使用环境下的化学稳定性。扫描电子显微镜(SEM)分析表明,吸附剂的表面形态构成了吸附的微观基础。通过对部分尿毒症毒性物质的吸附研究发现,本文研制的壳聚糖吸附剂对这些目标物均产生了一定的吸附作用,吸附平衡时间符合临床要求,其对3种小分子尿毒症毒性物质的吸附能力依肌酐、尿酸、尿素的次序递增,而对促皮质素(ACTH)的吸附量则达到了13.04mg/g,显示了该类吸附剂应用于临床治疗的潜在价值     

多孔硅/多孔氧化铝与PVK复合光致发光特性

用旋涂法实现了多孔硅、多孔氧化铝与聚乙烯咔唑(PVK)的复合,研究了多孔硅／PVK、多孔氧化铝／PVK复合体系的光致发光性能。PL谱的测试发现,多孔硅／PVK复合体系的PL谱同时具有多孔硅和PVK的发射峰。此外,在485nm的位置出现了一个新峰,讨论了这个峰的来源。而多孔氧化铝与PVK复合后,没有产生新的峰。但多孔氧化铝与PVK复合后,由于多孔氧化铝纳米孔的纳米限制效应使PVK的发光峰出现大幅度蓝移。从多孔硅与多孔氧化铝发光机制的不同出发,讨论了多孔硅、多孔氧化铝与PVK复合后产生不同结果的原因。     

烧结温度、La掺杂对Bi_(1-x)La_xMnO_3结构及磁性能的影响

用溶胶-凝胶(so-lgel)法制备了多铁Bi1-xLaxMnO3(BLMO,0.1≤x≤0.4)系列样品.样品的结构表征(X-射线衍射,扫描电子显微镜)及差热-热重(TG-DTA)分析测量显示,形成稳定的BLMO钙钛矿相的烧结温度位于900~950℃.La掺杂对BLMO样品(950℃烧结)的结构和磁性能的影响也被仔细研究.结果显示,随着La掺杂减少,样品中BLMO钙钛矿相减弱,铁磁转变温度(TC)由53K降至41K,而饱和磁化强度经历了先降低再升高的变化.这可归因于La含量较少的样品中Bi空位浓度的增加诱导了Mn-O-Mn键角的减小和局域Mn4+离子的增多,使得Mn3+和Mn4+离子的铁磁超交换增强和Mn3+离子的dz2轨道有序受到局域破坏.