Formation of Carcinogens in Processed Meat and Its Measurement with the Usage of Artificial Digestion—A Review

Meat is a rich source of various nutrients. However, it needs processing before consumption, what in turn generates formation of carcinogenic compounds, i.a., polycyclic aromatic hydrocarbons (PAH), nitrosamines (NOCs), and the most mutagenic heterocyclic aromatic amines (HAAs). It was widely found that many factors affect the content of carcinogens in processed meat. However, it has recently been discovered that after digestion free HAAs are released, which are not detectable before enzymatic treatment. It was established that the highest percentage of carcinogens is released in the small intestine and that its amount can be increased up to 6.6-fold. The change in free HAAs content in analyzed samples was dependent on many factors such as meat type, doneness, particle size of meat, and the enzyme concentration used for digestion. In turn, introduction of bacteria naturally occurring in the human digestive tract into the model significantly decreases total amount of HAAs. Contrary, the addition of food ingredients rich in polyphenols, fiber, and water (pepper powder, onions, apples) increases free HAAs’ release up to 56.06%. Results suggests that in vitro digestion should be an integral step of sample preparation. Artificial digestion introduced before chromatographic analysis will allow to estimate accurately the content of carcinogens in processed meat.     

Acoustic spectroscopy and electrical characterization of SiO2/Si structures with ultrathin SiO2 layers formed by nitric acid oxidation

Ultrathin silicon dioxide (SiO₂) layers formed on Si substrate with nitric acid have been investigated using both acoustic deep-level transient spectroscopy (A-DLTS) and electrical methods to characterize the interface states. The set of SiO₂/Si structures formed in different conditions (reaction time, concentrations of nitric acid (HNO₃), and SiO₂ thickness [3–9 nm]) was prepared. The leakage current density was decreased by post-oxidation annealing (POA) treatment at 250°C in pure nitrogen for 1 h and/or post-metallization annealing (PMA) treatment at 250°C in a hydrogen atmosphere for 1 h. All structures of the set, except electrical investigation, current-voltage (I - V), and capacitance — voltage (C - V) measurements, were investigated using A-DLTS to find both the interface states distribution and the role of POA and/or PMA treatment on the interface-state occurrence and distribution. The evident decreases of interface states and shift of their activation energies in the structures with PMA treatment in comparison with POA treatment were observed in most of the investigated structures. The results are analyzed and discussed.      

Analysis of A-DLTS spectra of MOS structures with thin NAOS SiO2 layers

A set of MOS structures with thin SiO₂ layers prepared by nitric acid oxidation (NAOS) method was investigated using acoustic deep level transient spectroscopy (A-DLTS) to explain the role of annealing treatment (post-oxidation annealing (POA) and post-metallization annealing (PMA)) at different conditions on the distribution of interface states. The activation energies of interface states and the corresponding capture cross-section were calculated both from Arrhenius plots constructed for individual peaks of the A-DLTS spectra and applying the method of modeling of measured acoustic spectra. The energy distribution of the interface states was determined also from the dependence of acoustoelectric response signal (ARS) on the external bias voltage (U _ac - V _G curves). By comparing the A-DLTS spectra, U _ac - V _G characteristics and some electrical measurements (G-V, I-V curves) of investigated MOS structures with no treatment with those treated with POA and/or PMA, the role of individual treatments was observed. The definite decrease of the interface states in the structures with the PMA treatment in comparison with the POA treatment was confirmed too.     

GaAs/AlGaAs photonic crystals for VCSEL-type semiconductor lasers

The results of modelling of the influence of photonic crystal on the performance of VCSEL-type semiconductor laser structure are shown and indicate that the use of those structures would significantly improve the working parameters of the devices. The method of fabrication of photonic crystals in the Bragg mirrors of GaAs/AlGaAs-based VCSELs is presented.     

Cognitive ability experiment with photosensitive organic molecular thin films

We present an optical experiment which permits us to evaluate the information exchange necessary to self-induce cooperatively a well-organized pattern in a randomly activated molecular assembly. A low-power coherent beam carrying polarization and wavelength information is used to organize a surface relief grating on a photochromic polymer thin film which is photoactivated by a powerful incoherent beam. We demonstrate experimentally that less than 1% of the molecules possessing information cooperatively transmit it to the entire photoactivated polymer film.     

The effect of carbon nanotubes on epoxy matrix nanocomposites

The paper concerns thermal properties of epoxy/nanotubes composites for aircraft application. In this work, influence of carbon nanotubes on thermal stability, thermal conductivity, and crosslinking density of epoxy matrix was determined. Three kinds of nanotubes were used: non-modified with 1- and 1.5-μm length, and 1-μm length modified with amino groups. Scanning electron microscopy observations were done for examining dispersion of nanotubes in the epoxy matrix. Glass transition temperature (T _g) was readout from differential scanning calorimetry. From dynamic mechanical analysis, crosslinking density was calculated for epoxy and its composites. Also, thermogravimetric analysis was done to determine influence of nanotubes addition on thermal stability and decomposition process of composites. Activation energy was calculated from TGA curves by Flynn–Wall–Ozawa method. Thermal diffusivity was also measured. SEM images proved the uniform dispersion of carbon nanotubes without any agglomerates. It was found that nanotubes modified with amino groups lead to the increase of epoxy matrix crosslinking density. The significant increase in T _g was also observed. On the other hand, addition of carbon nanotubes leads to the decrease of thermal stability of polymer due to the increase of thermal diffusivity.     

Salicylic Acid as Ionic Liquid Formulation May Have Enhanced Potency to Treat Some Chronic Skin Diseases

In recent years, numerous studies have shown that conversion of conventional drugs in ionic liquid (IL) formulation could be a successful strategy to improve their physicochemical properties or suggest a new route of administration. We report the synthesis and detailed characterization of eight salicylic acid-based ILs (SA-ILs) containing cation non-polar or aromatic amino acid esters. Using in vitro assays, we preliminary evaluated the therapeutic potency of the novel SA-ILs. We observed that conversion of the SA into ionic liquids led to a decrease in its cytotoxicity toward NIH/3T3 murine embryo fibroblasts and human HaCaT keratinocytes. It should be mentioned is that all amino acid alkyl ester salicylates [AAOR][SA] inhibit the production of the proinflammatory cytokine IL-6 in LPS-stimulated keratinocytes. Moreover, keratinocytes, pretreated with [PheOMe][SA] and [PheOPr][SA] seem to be protected from LPS-induced inflammation. Finally, the novel compounds exhibit a similar binding affinity to bovine serum albumin (BSA) as the parent SA, suggesting a similar pharmacokinetic profile. These preliminary results indicate that SA-ILs, especially those with [PheOMe], [PheOPr], and [ValOiPr] cation, have the potential to be further investigated as novel topical agents for chronic skin diseases such as psoriasis and acne vulgaris.     

Phenylalanine-Based AMPA Receptor Antagonist as the Anticonvulsant Agent with Neuroprotective Activity—In Vitro and In Vivo Studies

Trying to meet the multitarget-directed ligands strategy, a series of previously described aryl-substituted phenylalanine derivatives, reported as competitive antagonists of α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptors, were screened in vitro for their free-radical scavenging and antioxidant capacity in two different assays: ferric reducing antioxidant power (FRAP) and oxygen radical absorbance capacity fluorescent (ORAC-FL) assays. The most active antioxidants 1 and 8 were further examined to evaluate their neuroprotective properties in vitro. In this study, compound 1 showed a significant neuroprotective effect against the neurotoxin 6-hydroxydopamine in neuroblastoma SH-SY5Y and IMR-32 cell lines. Both compounds also showed prevention from high levels of reactive oxygen species (ROS) in SH-SY5Y cells. Furthermore, the desired monoamine oxidase B (MAO-B) inhibition effect (IC₅₀ = 278 ± 29 nM) for 1 was determined. No toxic effects up to 100 µM of 1 and 8 against neuroblastoma cells were observed. Furthermore, in vivo studies showed that compound 1 demonstrated significant anticonvulsant potential in 6-Hz test, but in neuropathic pain models its antiallodynic and antihyperalgesic properties were not observed. Concluding, the compound 1 seems to be of higher importance as a new phenylalanine-based lead candidate due to its confirmed promise in in vitro and in vivo anticonvulsant activity.     

The Effect of the Modification of Carbon Spheres with ZnCl2 on the Adsorption Properties towards CO2

Zinc chloride and potassium oxalate are often applied as activating agents for carbon materials. In this work, we present the preparation of ZnO/carbon spheres composites using resorcinol-formaldehyde resin as a carbon source in a solvothermal reactor heated with microwaves. Zinc chloride as a zinc oxide source and potassium oxalate as an activating agent were applied. The effect of their addition and preparation conditions on the adsorption properties towards carbon dioxide at 0 °C and 25 °C were investigated. Additionally, for all tested sorbents, the CO₂ sorption tests at 40 °C, carried out utilizing a thermobalance, confirmed the trend of sorption capacity measured at 0 and 25 °C. Furthermore, the sample activated using potassium oxalate and modified using zinc chloride (a carbon-to-zinc ratio equal to 10:1) displayed not only a high CO₂ adsorption capacity (2.69 mmol CO₂/g at 40 °C) but also exhibited a stable performance during the consecutive multicycle adsorption–desorption process.     

New Applications of Ph 3 P=N--Li in Organic Synthesis and Heteroatom Chemistry

The lithium triphenylaminophosphonium azayldiide 1 proved again to be a very good tool in organic synthesis, allowing further synthesis of various compounds such as vinyl nitriles, aromatic or heteroaromatic nitriles, and mono-, bis-, and trisphosphinimines.