Analytical protocol for investigation of zinc speciation in plant tissue

A specific procedure is proposed for investigating the chemical speciation of zinc (Zn) in plant tissues, viz., the extraction of Zn compounds from Plantago lanceolata L. followed by the chromatographic separation and inductively coupled plasma mass spectrometry (ICP-MS) identification of these compounds. In order to separate the Zn compounds, both size-exclusion (SEC) and ionexchange liquid chromatography (IC) were used in direct sequential and reverse sequential modes. In the direct sequential mode, the entire extract undergoes SEC separation and then the individual fractions are injected onto the ion-exchange column. The molecular size distribution is evaluated by SEC coupled on-line to the UV detector. In the reverse sequential mode, the entire extract undergoes the ion-exchange chromatographic separation and then the individual fractions are injected onto the size-exclusion column. The identification of Zn incorporated into the compounds is further performed using ICP-MS. This procedure is particularly useful in speciation studies when identification of the individual components of the element is problematic due to the lack of suitable standard substances, as is the case for Zn compounds. The proposed procedure facilitates assignment of the signals to the individual components of the fractions for both types of chromatography, thus rendering the chemical speciation of Zn possible when the lack of suitable standard substances impedes the identification of individual components.     

Synergy Between Expert and Machine-Learning Approaches Allows for Improved Retrosynthetic Planning

When computers plan multistep syntheses, they can rely either on expert knowledge or information machine-extracted from large reaction repositories. Both approaches suffer from imperfect functions evaluating reaction choices: expert functions are heuristics based on chemical intuition, whereas machine learning (ML) relies on neural networks (NNs) that can make meaningful predictions only about popular reaction types. This paper shows that expert and ML approaches can be synergistic—specifically, when NNs are trained on literature data matched onto high-quality, expert-coded reaction rules, they achieve higher synthetic accuracy than either of the methods alone and, importantly, can also handle rare/specialized reaction types.     

Ion recognition properties of new pyridine-2,6-dicarboxamide bearing propeller-like pendant residues: multi-spectroscopic approach

The synthesis and ion binding properties of new amide derived from propeller-like tris(2-pyridyl)amine and 2,6-pyridinedicarboxylic acid chloride were described. Amide binds divalent metal cations: copper(II), nickel(II), zinc(II), and lead(II) in acetonitrile. In acetonitrile:water mixture (9:1 v/v) amide interacts only with copper(II) and nickel(II) cations forming complexes of 1:1 stoichiometry. It was found that the introduction of bulky, nitrogen donor atom bearing pendant groups can influence coordination mode of pyridine-2,6-dicarboxamides. The probable model of ligand-ion interactions is proposed on the basis of 1H NMR and FT-IR spectroscopy.     

Effects of a Constant Magnetic Field on the Electrochemical Reactions of Quercetin

The paper presents a study of the effect of a constant magnetic field (CMF) on the basic processes of quercetin electrochemical reactions. According to the observation made in previous studies, the presence of a double bond in the C-ring of quercetin enhances the antioxidant properties of that compound, whereas the presence of −OH groups also affects the antioxidant properties. Using cyclic voltammetry it was found that the constant magnetic field improves the efficiency of quercetin electrooxidation, especially of the third stage of the process, i. e. the stage in which the oxidation of the OH groups in the A-ring is the most difficult. The use of HPLC confirmed the electrochemical measurements and the results of cyclic voltammetry studies. The beneficial effect of the magnetic field on the efficiency of quercetin oxidation was confirmed by the results of impedance spectroscopy measurements.     

Multicomponent Peptide Stapling as a Diversity‐Driven Tool for the Development of Inhibitors of Protein–Protein Interactions

Stapled peptides are chemical entities in‐between biologics and small molecules, which have proven to be the solution to high affinity protein–protein interaction antagonism, while keeping control over pharmacological performance such as stability and membrane penetration. We demonstrate that the multicomponent reaction‐based stapling is an effective strategy for the development of α‐helical peptides with highly potent dual antagonistic action of MDM2 and MDMX binding p53. Such a potent inhibitory activity of p53‐MDM2/X interactions was assessed by fluorescence polarization, microscale thermophoresis, and 2D NMR, while several cocrystal structures with MDM2 were obtained. This MCR stapling protocol proved efficient and versatile in terms of diversity generation at the staple, as evidenced by the incorporation of both exo‐ and endo‐cyclic hydrophobic moieties at the side chain cross‐linkers. The interaction of the Ugi‐staple fragments with the target protein was demonstrated by crystallography.     

Nanosized carbon black as synergist in PP/POE-MA/IFR system for simultaneously improving thermal,electrical and mechanical properties

Nanosized carbon black (CB) was introduced into polypropylene/maleic anhydride-grafted polyolefin elastomer/intumescent flame retardant (PP/POE-MA/IFR) system to investigate the effect of nanofiller as synergist on thermal, electrical and mechanical properties of polymer composites. With 5 mass% CB into PP/POE-MA/IFR system (POFC5), the T_max (corresponded to the temperature at the maximum mass loss rate) under air was increased by 122.4 °C; its limited oxygen index was as high as 31.4%; its vertical burning rating (UL-94) reached V0, and the peak value of heat release rate was decreased to only 19% of neat PP in cone calorimeter testing. Moreover, PP composites exhibited good electrical conductivity with more than 1.6 mass% CB, which is a low loading level to reach the critical percolation concentration. In addition, a good balance on stiffness and toughness of PP composites was achieved; especially, Young’s moduli and impact strength of POFC5 were increased to 1.26 and 2.5 times in comparison with that of neat PP, respectively. These results indicated that CB was an effective synergist in multi-component PP composites to simultaneously improve thermal, electrical and mechanical properties.

     

Effect of the position of a methoxy substituent on the antimicrobial activity and crystal structures of 4‐methyl‐1,6‐diphenylpyrimidine‐2(1H)‐selenone derivatives

Derivatives of pyrimidine‐2(1H)‐selenone are a group of compounds with very strong antimicrobial activity. In order to study the effect of the position of the methoxy substituent on biological activity, molecular geometry and intermolecular interactions in the crystal, three derivatives were prepared and evaluated with respect to their antimicrobial activities, and their crystal structures were determined by X‐ray diffraction. The investigated compounds, namely, 1‐(X‐methoxyphenyl)‐4‐methyl‐6‐phenylpyrimidine‐2(1H)‐selenones (X = 2, 3 and 4 for 1 , 2 and 3 , respectively), C₁₈H₁₆N₂OSe, showed very strong activity against selected strains of Gram‐positive bacteria and fungi. Two compounds, 1 and 2 , crystallize in the monoclinic space group P2₁/c, while 3 crystallizes in the space group P2₁/n; 1 has two molecules in the asymmetric unit and the other two ( 2 and 3 ) have one molecule. The geometries of the investigated compounds differ slightly in the mutual orientations of the aromatic and pyrimidineselenone rings. The O atom in 1 stabilizes the conformation of the molecules via intramolecular C—H…O hydrogen bonding. The packing of molecules is determined by weak C—H…N and C—H…Se intermolecular interactions and additionally in 1 and 2 by C—H…O intermolecular interactions. The introduction of the methoxy substituent results in greater selectivity of the investigated compounds.     

Products of Photo- and Thermochemical Rearrangement of 19-Membered di-tert-Butyl-Azoxybenzocrown

The preparation and characterization of products of the photochemical and thermochemical rearrangements of 19-membered azoxybenzocrowns with two, bulky, tert-butyl substituents in benzene rings in the para positions to oligooxyethylene fragments (meta positions to azoxy group, i.e., t-Bu-19-Azo-O have been presented. In photochemical rearrangement, two colored typical products were expected, i.e., 19-membered o-hydroxy-m,m′-di-tert-butyl-azobenzocrown (t-Bu-19-o-OH) and 19-membered p-hydroxy-m,m′-di-tert-butyl-azobenzocrown (t-Bu-19-p-OH). In experiments, two colored atypical macrocyclic derivatives, one 6-membered and one 5-membered ring, bearing an aldehyde group (t-Bu-19-al) or intramolecular ester group (t-Bu-20-ester), were obtained. Photochemical rearrangement led to one more macrocyclic product being isolated and identified: a 17-membered colorless compound, without an azo moiety, t-Bu-17-p-OH. The yield of the individual compounds was significantly influenced by the reaction conditions. Thermochemical rearrangement led to t-Bu-20-ester as the main product. The structures of the four crystalline products of the rearrangement—t-Bu-19-o-OH, t-Bu-19-p-OH, t-Bu-20-ester and t-Bu-17-p-OH—were determined by the X-ray method. Structures in solution of atypical derivatives (t-Bu-19-al and t-Bu-20-ester) and t-Bu-19-p-OH were defined using NMR spectroscopy. For the newly obtained hydroxyazobenzocrowns, the azo–phenol⇄quinone–hydrazone tautomeric equilibrium was investigated using spectroscopic methods. Complexation studies of alkali and alkaline earth metal cations were studied using UV-Vis absorption spectroscopy. ¹H NMR spectroscopy was additionally used to study the cation recognition of metal cations. Cation binding studies in acetonitrile have shown high selectivity towards calcium over magnesium for t-Bu-19-o-OH.     

Salicylic Acid as Ionic Liquid Formulation May Have Enhanced Potency to Treat Some Chronic Skin Diseases

In recent years, numerous studies have shown that conversion of conventional drugs in ionic liquid (IL) formulation could be a successful strategy to improve their physicochemical properties or suggest a new route of administration. We report the synthesis and detailed characterization of eight salicylic acid-based ILs (SA-ILs) containing cation non-polar or aromatic amino acid esters. Using in vitro assays, we preliminary evaluated the therapeutic potency of the novel SA-ILs. We observed that conversion of the SA into ionic liquids led to a decrease in its cytotoxicity toward NIH/3T3 murine embryo fibroblasts and human HaCaT keratinocytes. It should be mentioned is that all amino acid alkyl ester salicylates [AAOR][SA] inhibit the production of the proinflammatory cytokine IL-6 in LPS-stimulated keratinocytes. Moreover, keratinocytes, pretreated with [PheOMe][SA] and [PheOPr][SA] seem to be protected from LPS-induced inflammation. Finally, the novel compounds exhibit a similar binding affinity to bovine serum albumin (BSA) as the parent SA, suggesting a similar pharmacokinetic profile. These preliminary results indicate that SA-ILs, especially those with [PheOMe], [PheOPr], and [ValOiPr] cation, have the potential to be further investigated as novel topical agents for chronic skin diseases such as psoriasis and acne vulgaris.