Orbital formal normal forms for general Bogdanov-Takens singularity

We solve completely the problem of classification of germs of complex planar vector fields with nilpotent singularity with respect to formal orbital equivalence.     

A Study of the Activity of Recombinant Mn-Superoxide Dismutase in the Presence of Gold and Silver Nanoparticles

Applied Biochemistry and Biotechnology - Superoxide dismutase (SOD) is one of the best characterized enzyme maintaining the redox state in the cell. A bacterial expression system was used to...     

Effect of Polythiophene Content on Thermomechanical Properties of Electroconductive Composites

The thermal, mechanical and electrical properties of polymeric composites combined using polythiophene (PT) dopped by FeCl₃ and polyamide 6 (PA), in the aspect of conductive constructive elements for organic solar cells, depend on the molecular structure and morphology of materials as well as the method of preparing the species. This study was focused on disclosing the impact of the polythiophene content on properties of electrospun fibers. The elements for investigation were prepared using electrospinning applying two substrates. The study revealed the impact of the substrate on the conductive properties of composites. In this study composites exhibited good thermal stability, with T₅ values in the range of 230–268 °C that increased with increasing PT content. The prepared composites exhibited comparable PA T_g values, which indicates their suitability for processing. Instrumental analysis of polymers and composites was carried out using Fourier Transform Infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM).     

Cationic Heteroconjugation Constants in the OHN+ and NHO+ Systems in Propylene Carbonate: Dependence on Difference in Basicity

Cationic heteroconjugation equilibria of more than ninety systems consisting of substituted pyridines, their N-oxides, and trimethylamine N-oxide, i. e., in systems with mixed hydrogen bridges of type OHN⁺ (NHO⁺) were studied in propylene carbonate. Both experimental systems without proton transfer, BH⁺/B₁, and those with proton transfer, B₁H⁺/B, were explored. The stability of the mixed hydrogen bridges, OHN⁺ (NHO⁺), is compared with that of the OHC⁺-type bridges. The influence of the difference in basicity of the conjugate base of the proton donor and the proton acceptor on the presence of the proton transfer equilibria, and, consequently, the possibility of determination of the cationic heteroconjugation constant values is discussed.     

An alternative approach to controlled release of oxprenolol from the implantable delivery system based on biodegradable copolymer and genistein

This paper describes the development of covalent star-shaped poly(L-lactide/?-caprolactone) random copolymer-oxprenolol (OXP) conjugates as a potential approach to controlling drug release from implantable delivery systems. We prepared synthesized materials containing 14–17 mol% OXP, which were conjugated via an ester bond. The conjugates, which were composed of biodegradable copolyester chains, natural genistein as a central core and drug, were characterized by hydrogen nuclear magnetic resonance (¹H-NMR), Fourier transform infrared spectroscopy (FTIR) and viscosity methods. We evaluated the cyto- and genotoxicity of the synthesized copolymeric matrices, followed by the conjugates, with bacterial luminescence, protozoan and Salmonella typhimurium TA1535 assays. Furthermore, we performed in vitro mammalian assays of the obtained products with V79 cells. We found that the in vitro release of OXP from the obtained star-shaped conjugates was dependent on the structure of the synthesized biodegradable matrices.     

Kinetics and Mechanism of Chromium(III)-oxalates-2-hydroxynicotinate and Chromium(III)-oxalates-3-hydroxypicolinate Aquation in HClO4 Solutions

New chromium(III) complexes, [Cr(C₂O₄)₂(2-hnic)]²⁻ and [Cr(C₂O₄)₂(3-hpic)]²⁻ (where 2-hnic = O,O′-bonded 2-hydroxynicotinic acid and 3-hpic = N,O-bonded 3-hydroxypicolinic acid), were obtained and characterized in solution. The acid-catalyzed aquation of the both complexes leads to liberation of the appropriate pyridinecarboxylic acid and formation of cis-[Cr(C₂O₄)₂(H₂O)₂]⁻. Kinetics of these reactions were studied spectrophotometrically in the 0.1–1.0 M HClO₄ range, at I = 1.0 M. In the case of [Cr(C₂O₄)₂(2-hnic)]²⁻, a slow chelate-ring opening at the Cr–O (phenolate) bond is followed by a fast Cr–O (carboxylate) bond breaking. The rate law: k_obs = k_HQ_H[H⁺] was established, where k_H is the acid-catalyzed rate constant and Q_H is the protonation constant of the coordinated phenolate oxygen atom. In the case of [Cr(C₂O₄)₂(3-hpic)]²⁻, the reversible chelate-ring opening at Cr–N bond is followed by the rate determining step – the one-end bonded ligand liberation. The rate law for the first step was determined: k_obs = k₁+k₋₁/Q₁[H⁺], where k₁ and k₋₁ are the rate constants of the chelate-ring opening and closure and Q₁ is the protonation constant of the pyridine nitrogen atom. The aquation mechanisms are proposed and the effect of ligand coordination mode on complex reactivity is discussed.     

Rapid hydrocarbon analysis using a miniature rectilinear ion trap mass spectrometer

A miniature ion trap mass analyzer was applied to the analysis of traces of hydrocarbons and simple heteroatomics in the vapor phase and in aqueous solution. Vapors of acetone, acetic acid, acetonitrile, benzene, butanethiol, carbon disulfide, hexane, dichloromethane, naphthalene, toluene and xylenes were detected and quantified using solid sorbent trapping and, in some cases, by passage through a membrane interface. Aqueous solutions of benzene, toluene, xylenes, hexane and a petroleum naphtha distillate were examined using the membrane interface. Sampling, detection and identification of all compounds was completed in times of less than one minute. The gas-phase samples of toluene and benzene were detected at 200 ppt (limit of detection, LOD) for toluene and 600 ppt for benzene. Identification of benzene and xylene in aqueous solutions was readily achieved with LODs of 200 and 400 ppb, respectively. Quantification over a linear dynamic range of two orders of magnitude for the aqueous samples and three orders of magnitude for the vapor-phase samples was demonstrated.     

Tracing Possible Structural Asymmetry of Silica Gel Used for Precoating Thin-Layer Chromatography Plates

JPC – Journal of Planar Chromatography – Modern TLC - We have previously described unexpected two-dimensionality in the thin-layer chromatographic separation of pairs of enantiomers of...     

Crystal structure, Raman spectroscopy, and ab initio calculations of a new bialkali alanate K2LiAlH6

A new bialkali alanate K2LiAlH6 was synthesized at 320-330 degrees C and 100-700 bar. It was structurally characterized by powder X-ray diffraction. It crystallizes in space group R3m (No. 166) with unit cell parameters a = 5.62068(8) and c = 27.3986(6) A. The Li and K cation sites are mutually exclusive, and Rietveld refinement finds no cation mixing. First-principles total energy calculations were performed for nine competing database structures of the stoichiometry A2BCX6, taken from fluoride and oxide compounds in the Inorganic Crystal Structure Database (ICSD). The relaxed structures were compared via their total energies and their agreement with experimental diffraction spectra. Two database structures K2LiAlF6 (R3m) and Cs2NaAlF6 (C2/m) were found to have the lowest total energies, but with the Rietveld method the K2LiAlF6 structure type was shown to be the most favorable. Ab initio total energy calculations support the validity of the structure determination. First-principles calculations also indicate that cation mixing is energetically unfavorable. Hydride properties such as plateau pressure are therefore more difficult to manipulate through alloying in this class of compounds.     

Chromium(III) complexes with lutidinic acid: kinetic studies in HClO<Subscript>4</Subscript> and NaOH solutions

Chromium(III)-lutidinato complexes of general formula [Cr(lutH) _n (H₂O)_6−2n ]³⁻ⁿ (where lutH⁻ is N,O-bonded lutidinic acid anion) were obtained and characterized in solution. Acid-catalysed aquation of [Cr(lutH)₃]⁰ leads to only one ligand dissociation, whereas base hydrolysis produces chromates(III) as a result of subsequent ligand liberation steps. The kinetics of the first ligand dissociation were studied spectrophotometrically, within the 0.1–1.0 M HClO₄ and 0.4–1.0 M NaOH range. In acidic media, two reaction stages, the chelate-ring opening and the ligand dissociation, were characterized. The dependencies of pseudo-first-order rate constants on [H⁺] are as follows: k _obs1 = k ₁ + k ₋₁/K ₁[H⁺] and k _obs2 = k ₂ K ₂[H⁺]/(1 + K ₂[H⁺]), where k ₁ and k ₂ are the rate constants for the chelate-ring opening and the ligand dissociation, respectively, k ₋₁ is the rate constant for the chelate-ring closure, and K ₁ and K ₂ are the protonation constants of the pyridine nitrogen atom and coordinated 2-carboxylate group in the one-end bonded intermediate, respectively. In alkaline media, the rate constant for the first ligand dissociation depends on [OH⁻]: k _obs1 = k _OH(1) + k _O[OH⁻], where k _OH(1) and k _O are rate constants of the first ligand liberation from the hydroxo- and oxo-forms of the intermediate, respectively, and K ₂ is an equilibrium constant between these two protolytic forms. Kinetic parameters were determined and a mechanism for the first ligand dissociation is proposed. The kinetics of the ligand liberation from [Cr(lut)(OH)₄]³⁻ were also studied and the values of the pseudo-first-order rate constants are [OH⁻] independent.