Background current elimination in thin layer ion-selective membrane coulometry

A promising method for the elimination of undesired capacitive currents in view of realizing a potentially calibration free coulometric ion detection system is presented. The coulometric cell is composed of a porous polypropylene tube doped with a liquid calcium-selective membrane and a silver/silver chloride wire as an inner electrode, forming a thin layer sample between wire and tubing. The total charge passed through the system during potential controlled electrolysis of the thin layer sample is indeed found to be proportional to the amount of calcium present, but non-Faradaic processes do contribute to the obtained signal. We introduce here a multi-pulse procedure that allows one to perform a second excitation pulse at the same excitation potential after exhaustive ion transfer voltammetry of calcium has taken place. The intercept of the calibration curve after background subtraction is found as 20.6 ± 0.6 μC, significantly lower than the value of 54.1 ± 0.8 μC for the uncorrected curve. Changes in sample temperature (from 23 °C to 38 °C) did equally not affect the background corrected coulometric readings, supporting that the procedure renders the readout principle more robust.     

New Fluorescent Sensors Based on 1<Emphasis Type=Italic>H</Emphasis>-pyrazolo[3,4-<Emphasis Type=Italic>b</Emphasis>]quinoline Skeleton

Novel fluorescing dyes 1,3,4-triphenyl-6-(1,4,7,10-tetraoxa-13-aza-cyclopentadec-13-ylmethyl)-1H-pyrazolo[3,4-b]quinoline (K1) and 2-[(2-hydroxyethyl)-(1,3,4-triphenyl-1H-pyrazolo[3,4-b]quinolin-6-ylmethyl)-amino]ethanol (L1) have been synthesized and investigated by the means of steady state and time-resolved fluorescence techniques. These compounds act as sensors for the fluorescence detection of small inorganic cations (lithium, sodium, barium, magnesium and calcium) in solvents of different polarities (THF and acetonitrile). The mechanism, which allows application of these compounds as sensors, is an electron transfer from the electro-donative part of molecule to the acceptor part (fluorophore), which is retarded upon complexation of the electro-donative part by inorganic cations. We found that crown ether-containing compound is very sensitive to the addition of any investigated ions but amino alcohol-containing one exhibits better selectivity to the addition of two-valued cations. Two kinds of the complexes (LM⁺ and L₂M⁺) were found in the investigated systems. In addition, the dyes may be used as fluorescence indicators in solvents of lower polarity like tetrahydrofuran.     

Comparison of human blood serum DSC profiles in aqueous and PBS buffer solutions

Journal of Thermal Analysis and Calorimetry - The results of studies of physiological fluids by differential scanning calorimetry (DSC) for the purpose of diagnosis and monitoring of diseases are...     

New Insight on Carbon Dioxide-Mediated Hydrogen Production**

A new approach to hydrogen production from water is described. This simple method is based on carbon dioxide-mediated water decomposition under UV radiation. The water contained dissolved sodium hydroxide, and the solution was saturated with gaseous carbon dioxide. During saturation, the pH decreased from about 11.5 to 7–8. The formed bicarbonate and carbonate ions acted as scavengers for hydroxyl radicals, preventing the recombination of hydroxyl and hydrogen radicals and prioritizing hydrogen gas formation. In the presented method, not yet reported in the literature, hydrogen production is combined with carbon dioxide. For the best system with alkaline water (0.2 m NaOH) saturated with CO₂ under UV-C, the hydrogen production amounted to 0.6 μmol h⁻¹ during 24 h of radiation.     

Study on the electroreduction of In(III) ions at gold from acidic bromide solutions by the rotating ring-disc electrode technique

The mechanism of the indium electrodeposition on gold from acidic KBr solutions has been investigated by means of the rotating ring-disc electrode technique. The measurements showed that the overall electrode reaction In(III) + 3 e In consists of two successive charge transfer steps, i.e. In(III) + 2 e In(I) and In(I) + e In, with soluble monovalent indium as an intermediate. The current efficiency for In(I) generation under steady-state conditions is 100% in the case of low disc current densities. The disproportionation of In(I) in the bulk of solution occurs in slightly acidified solutions,pH=2, in addition to the In(I) electrochemical reduction. Based on the ring current transients, it was established that the two-electron transfer step is preceded by the formation of a thin passive film of indium metal.

---

Untersuchung der elektrochemischen Reduktion von In(III)-Ionen an Gold in sauren Bromidlösungen mit der rotierenden Ring-Scheiben-Elektrode

Zusammenfassung Mit Hilfe der rotierenden Ring-Scheiben-Elektrode wurde der Mechanismus der kathodischen Abscheidung von Indium auf Gold in sauren KBr-Lösungen untersucht. Aus den Messungen folgt, daß die Bruttoreaktion In(III) + 3e In über zwei aufeinanderfolgende Durchtrittsreaktionen, In(III) + 2 e In(I) und In(I) + e In, mit löslichem einwertigem Indium als Zwischenprodukt abläuft. Bei kleinen Stromdichten werden die In(I)-Ionen mit 100%iger Stromausbeute erzeugt. In schwächer sauren Lösungen (pH=2) konnte außer der elektrochemischen Reduktion von In(I) zusätzlich dessen Disproportionierung innerhalb der Lösung ermittelt werden. Auf Grund der Ringstrom-Zeit-Kurven wurde auch festgestellt, daß die Bildung von einer dünnen In-Metallschicht, die ein passives Verhalten aufweist, dem Zweielektronenübergang vorangegangen ist.

     

Deposition of boron nitride on graphite at 1300 K

A method for the deposition of BN onto graphite and other substrates is described. Boron trichloride (BCl₃) and ammonia (NH₃) diluted with Ar were used as reacting gases. The deposition process was carried out at 1300 K as well as lower temperatures in an open system at pressures of 1 atm. The consequences of the introduction of hydrogen to the system were considered. It was demonstrated that the replacement of argon with hydrogen increases the efficiency of the process as well as the theoretical rate of BN deposition. However, the acceleration of the deposition seems to be unprofitable, because the resulting supersaturation leads to the formation of an amorphous phase. The modification of the experimental conditions were proposed.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Routine determination of major anions in atmospheric aerosols by capillary electrophoresis

Capillary electrophoresis (CE) with indirect UV detection utilizing a pyromellitate-based electrolyte was used for the routine analysis of major anions in atmospheric aerosols collected on filters with high-volume (Hi-Vol) samplers. The long-term reliability of the CE system was checked over an 8-month period during which over 2900 samples were analyzed. In addition, approximately 1100 samples were analyzed in parallel by ion chromatography (IC). It has been shown that acceptable analytical performance can be routinely obtained. The agreement between the CE and IC results is good, generally better than 20% at concentrations larger than 1 mg l⁻¹.     

Twist-Bend Nematic Glasses: The Synthesis and Characterisation of Pyrene-based Nonsymmetric Dimers

A selection of pyrene-based liquid crystal dimers have been prepared, containing either methylene-ether or diether linked spacers of varying length and parity. All the diether linked materials, CBOnO.Py (n=5, 6, 11, 12), exhibit conventional nematic and smectic A phases, with the exception of CBO11O.Py which is exclusively nematic. The methylene-ether linked dimer, CBnO.Py, with an even-membered spacer (n=5) was solely nematogenic, but odd-members (n=6, 8, 10) exhibited both nematic and twist-bend nematic phases. Replacement of the cyanobiphenyl fragment by cyanoterphenyl giving CT6O.Py, gave elevated melting and nematic-isotropic transition temperatures, and SmA and SmC_A phases were observed on cooling the nematic phase. Intermolecular face-to-face associations of the pyrene moieties drive glass formation, and all these materials have a glass transition temperature at or above room temperature. The stability of the glassy twist-bend nematic phase allowed for its study using AFM, and the helical pitch length, P_TB, was measured as 6.3 and 6.7 nm for CB6O.Py and CB8O.Py, respectively. These values are comparable to the shortest pitch of a twist-bend nematic phase measured to date.     

Modification of Polylactide Nonwovens with Carbon Nanotubes and Ladder Poly(silsesquioxane)

Electrospun nonwovens of poly(L-lactide) (PLLA) modified with multiwall carbon nanotubes (MWCNT) and linear ladder-like poly(silsesquioxane) with methoxycarbonyl side groups (LPSQ-COOMe) were obtained. MWCNT and LPSQ-COOMe were added to the polymer solution before the electrospinning. In addition, nonwovens of PLLA grafted to modified MWCNT were electrospun. All modified nonwovens exhibited higher tensile strength than the neat PLA nonwoven. The addition of 10 wt.% of LPSQ-COOMe and 0.1 wt.% of MWCNT to PLLA increased the tensile strength of the nonwovens 2.4 times, improving also the elongation at the maximum stress.