Catalytic activity of Co/SiO2 and Co/TiO2 nanosized systems in the oxidation of carbon monoxide

The effects of the preparation procedure, active component concentration, and conditions of formation of nanosized cobalt-containing systems based on TiO₂ and SiO₂ mesoporous powders on their catalytic activity in the oxidation of carbon monoxide were studied. The active phase in the systems was cobalt spinel CoCo₂O₄ found in all samples. High catalytic activity was found in the samples characterized by relatively high contents of surface active centers (cobalt cations with octahedral surroundings).     

Development of parametric models for monitoring changes in the properties of materials in the process of operation of gas pipelines

Steel failure is closely associated with the aging process, which consists in the diffusion motion of carbon atoms solved in a ferrite matrix to grain boundaries and the release of carbide particles on them. Steel aging is caused by the thermodynamic nonequilibrium of the initial state and the gradual approach to the state of structural equilibrium under conditions of sufficient diffusion mobility of carbon atoms. Aging promotes the initiation and growth of brittle cracks in steel. It is shown that the change in the strength properties of pipe steels in the process of operation calls for the corresponding methods of determining the lifetime of gas pipelines with consideration of the results of diagnostic examinations and the physico-mechanical properties of structural materials used for the construction and repair of gas pipelines.     

Helical Ullazine-Quinoxaline-Based Polycyclic Aromatic Hydrocarbons

Polycyclic aromatic azomethine ylides (PAMYs) are powerful building blocks in the bottom-up synthesis of internally nitrogen-containing polycyclic aromatic hydrocarbons (N-PAHs) through 1,3-cycloaddition reactions. In this work, the cycloaddition reaction of PAMYs to asymmetric ortho-quinones is presented, which, in contrast to the addition to symmetric para-quinones, facilitates subsequent condensation reactions and allows the synthesis of three helical N-PAHs with ullazine-quinoxaline ( UQ - 1 – 3 ) backbones. UQ - 1 and UQ - 2 possess two helical centers; however, single-crystal X-ray analysis together with the computational modeling of UQ - 3 elucidate the formation of only the thermodynamically most stable geometry with four helical centers in a (P,P,M,M) configuration. For the series UQ - 1 – 3 , the number of redox steps is directly correlated with the number of ullazine or quinoxaline units incorporated into the targeted molecular backbones. A detailed investigation of the spectroscopic and magnetic properties of the radical cation and anion as well as the dication and dianion species by in situ EPR/UV/Vis-NIR spectroelectrochemistry is provided. The excellent optical and redox properties combined with helical geometries render them possibly applicable as chiral emitter or ambipolar charge transport material in organic electronics.     

Interaction of benzene,L-histidine and L-proline with urea,N,N-dimethylpropyleneurea,and N,N-dimethylformamide in water

Russian Journal of General Chemistry - The paper focuses on the interaction of two heterocyclic amino acids and hydrophobic benzene with urea, dimethylformamide, and dimethylpropyleneurea in water...     

Effect of thermal aging on the mechanical characteristics of a composite of a polyimide with an organosilicon resin

The effect exerted by thermal aging in air at 350°C on the thermal and mechanical properties of composite films prepared on the basis of heat-resistant polyimide PM and non-film-forming polymethylphenylsiloxane (PMPS) was examined. The phase segregation of polymeric composites of various compositions and the thermal aging rate were evaluated.     

Thermodynamics of hard poly(phenylene-pyridyl) dendrimers

The temperature dependences of heat capacity C ^○ _p = f(T) of hard poly(phenylene-pyridyl) dendrimers of the first and the second generations based on 1,3,5-triethynylbenzene were studied over the temperature range from 7–180 to 455–470 K for the first time. Over the range 290–350 K, the relaxation transition supposedly caused by sample devitrification was detected and characterized for the dendrimer of the first generation. The experimental results were used to calculate the standard thermodynamic functions, namely, heat capacity, enthalpy, entropy, and change in the Gibbs energy on heating. The standard entropy of formation of the compounds under study was determined at T = 298.15 K. The qualitative and quantitative dependences of the thermodynamic properties of the poly(phenylene-pyridyl) dendrimers on their composition and structure were revealed by comparison of the determined parameters with similar data for the earlier studied dendrimers of this series.     

Calorimetric study of poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K

For the first time, the heat capacity $ C_{\text{p}}^{^\circ } $ of poly(2-ethylhexyl acrylate) has been studied in an adiabatic vacuum calorimeter between 7 and 350 K, the standard thermodynamic functions: heat capacity $ C_{\text{p}}^{^\circ } $ (T), enthalpy H°(T) ? H°(0), entropy S°(T) ? S°(0), Gibbs function G°(T) ? H°(0) have been calculated from T → 0 to 350 K. The energy of combustion Δ_c U of the compound under study has been measured in a calorimeter with a stationary bomb and an isothermal shell. The standard enthalpy of combustion Δ_c H° and thermodynamic parameters of formation—enthalpy Δ_f H°, entropy Δ_f S°, Gibbs function Δ_f G°—at T = 298.15 K have been calculated. The results have been used to calculate the thermodynamic characteristics of 2-ethylhexyl acrylate bulk polymerization into poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K.     

Standard thermodynamic functions of CaNi0.5Zr1.5(PO4)3 crystalline phosphate in the range of T → 0 to 640 K

The temperature dependence of the heat capacity C _p ^○ = f(T) of CaNi_0.5Zr_1.5(PO₄)₃ crystalline phosphate is studied by precision adiabatic vacuum and differential scanning calorimetry over the temperature range of 7–640 K. Its standard thermodynamic functions C _p ^○ (T), H ^○(T)-H ^○(0), S ^○(T), and G ^○(T)-H ^○(0) for the region T → 0 to 640 K and the standard entropy of formation at T = 298.15 K are calculated from the obtained experimental data. Using data on the low-temperature (30–50 K) heat capacity, the D fractal dimension of phosphate is determined and conclusions about the character of the topology of its structure have been made. The final results are compared to data from thermodynamic investigations of the structurally related crystalline phosphates Zr₃(PO₄)₄, Ni_0.5Zr₂(PO₄)₃, and Ca_0.5Zr₂(PO₄)₃.     

Dielectric properties of liquid crystalline composites doped with nano-dimensional fragments of shungite carbon

A cholesteric liquid crystal (CLC) – cholesteryl tridecylate (X-20) was doped with nanoparticles of shungite carbon (Sh) to effectively improve some physicochemical properties of the CLC matrix for the further use in electronic devices. The influence of Sh (concentration of 0.005 and 0.02 wt. %) on phase transition temperatures of X-20 was studied. Addition of 0.005 wt. % of Sh shifts phase transition temperatures upward, while the concentration increase to 0.02 wt. % leads to the opposite effect. These data were taken into account during the study of dielectric properties in different phase states. The dielectric properties were studied in the frequency range from 20 Hz to 10 MHz. Only for the system X-20/Sh (0.02 wt. %), dispersion of the dielectric permittivity was observed. The dispersion was caused by the appearance of additional relaxation processes and it was substantially more extended than the classical Debye theory suggests. The results of the research show that the ‘CLC – Sh nanoparticles’ composites can be used as promising materials to increase the efficiency of radio electronics devices.     

The electro-optics of nematic liquid crystals stabilized by a polymer network

Samples of nematics stabilized by a polymer network, which are new composite materials, were prepared. A ZhK-1277 nematic composite and a bisphenyl-A-dimethacrylate monomer were used. Polymerization was conducted via UV radiation. The electro-optic properties, i.e., the dependence of transmittance and the turn-on and turn-off times on the electric voltage and layer thickness, of the resulting material and a pure nematic were studied. The experimental results are explained by the domain structure of the nematic in a polymer network, according to which the liquid crystal in an electro-optic cell is composed of oriented domains separated by thin partitions of the polymer. The size of the domain regions of the liquid crystal is 2 μm.