Effects of structure and electronic properties of D-π-A organic dyes on photovoltaic performance of dye-sensitized solar cells

Herein,we examine the performance of dye-sensitized solar cells containing five D-π-A organic dyes designed by systematic modification of π-bridge size and geometric structure.Each dye has a simple push-pull structure with a triarylamino group as an electron donor,bithiophene-4,4-dimethyl-4 H-cyclopenta 1,2-b:5,4-b’]dithiophene(M11),4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophenethiophene(M12),thiophene-4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene(M13),4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene-benzene(M14),and 4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene(M15)units asπ-bridges,and cyanoacrylic acid as an electron acceptor/anchor.The extension of theπ-bridge linkage favors wide-range absorption but,because of the concomitant molecular volume increase,hinders the efficient adsorption of dyes on the TiO₂ film surface.Hence,higher loadings are achieved for smaller dye molecules,resulting in(i)a shift of the TiO₂ conduction band edge to more negative values,(ii)a greater photocurrent,and(iii)suppressed charge recombination between the photoanode and the redox couple in the electrolyte.Consequently,under one-sun equivalent illumination(AM 1.5 G,100 mW/cm²),the highest photovoltage,photocurrent,and conversion efficiency(η=7.19%)are observed for M15,which has the smallest molecular volume among M series dyes.     

Morphology-Directed Selective Production of Ethylene or Ethane from CO2 on a Cu Mesopore Electrode

The electrocatalytic conversion of CO₂ to value-added hydrocarbons is receiving significant attention as a promising way to close the broken carbon-cycle. While most metal catalysts produce C₁ species, such as carbon monoxide and formate, the production of various hydrocarbons and alcohols comprising more than two carbons has been achieved using copper (Cu)-based catalysts only. Methods for producing specific C₂ reduction outcomes with high selectivity, however, are not available thus far. Herein, the morphological effect of a Cu mesopore electrode on the selective production of C₂ products, ethylene or ethane, is presented. Cu mesopore electrodes with precisely controlled pore widths and depths were prepared by using a thermal deposition process on anodized aluminum oxide. With this simple synthesis method, we demonstrated that C₂ chemical selectivity can be tuned by systematically altering the morphology. Supported by computational simulations, we proved that nanomorphology can change the local pH and, additionally, retention time of key intermediates by confining the chemicals inside the pores.     

New reaction of formation of the fused tricyclic bispyrroloquinone ring system

A one-pot procedure to difunctionalized fused tricyclic bispyrroloquinone derivatives involving the condensation of N-tosylindoledione and α-ketoamines is described.     

A New Insight into the Stereoelectronic Control of the Pd0-Catalyzed Allylic Substitution: Application for the Synthesis of Multisubstituted Pyran-2-ones via an Unusual 1,3-Transposition

Pyran-2-ones 3 undergo a novel Pd⁰-catalyzed 1,3-rearrangement to afford isomers 6 . The reaction proceeds via an η²-Pd complex, the pyramidalization of which (confirmed by quantum chemistry calculations) offers a favorable antiperiplanar alignment of the Pd−C and allylic C−O bonds ( C ), thus allowing the formation of an η³-Pd intermediate. Subsequent rotation and rate-limiting recombination with the carboxylate arm then gives isomeric pyran-2-ones 6 . The calculated free energies reproduce the observed kinetics semi-quantitatively.     

A differential scanning calorimetry study on poly(ethylene terephthalate) isothermally crystallized at stepwise temperatures: multiple melting behavior re-investigated

The multiple melting behavior of poly(ethylene terephthalate) (PET) was investigated with differential scanning calorimetry (DSC) by examining PET samples having been subjected to special schemes of crystallization and annealing treatment at multiple descending temperatures. Upon such step-wise annealing in decreasing temperatures, the existence of doublet melting peaks in addition to a series of multiple minor peaks in the PET has been demonstrated using carefully designed thermal schemes. Using the Hoffman theory, multiple lamellae populations, might be suggested to be simultaneously present in the PET subjected to such thermal treatments. However, direct experimental evidence has yet to be provided. The low-temperature minor crystals simply melt during normal scanning without having time enough to reorganize into higher-melt crystals. Nevertheless, the effect of scanning on non-isothermal crystallization does exist but is primarily confined to the temperature range much below the main melting region where the crystallization of polymer chains can progress at a reasonable rate. At higher temperatures near the main melting region, annealing for extended times is required in order to result in relative changes of the melting endotherms of the upper and lower peaks in the main melting doublet. In all we have shown that interpretations of the multiple melting phenomenon in semicrystalline polymers can be better refined.     

Colloidlike behaviour of a polystyrene-b-poly(ethylene-co-propylene) diblock copolymer dissolved in n-decane investigated by pulsed field gradient nuclear magnetic resonance

The self-diffusion of a polystyrene-b-poly(ethylene-co-propylene) diblock copolymer dissolved in a preferential solvent for the aliphatic block, n-decane, was investigated by pulsed field gradient NMR. The diblock copolymer forms micelles in solution, the structure of the solid polymer being preserved in the native solution because the polystyrene is in the glassy state. The equilibrium state is attained upon heating which again freezes in upon cooling to room temperature. The hydrodynamic radius of the micelles decreases by about 50% during this heating–cooling process. The concentration dependence of the self-diffusivity shows typical colloidlike behaviour, and it can be described by a Vogel–Fulcher–Tammann-like equation. No indications of crystallization at higher concentrations are observed in the micellar solution because the micellar sizes are slightly polydisperse. The self-diffusivity was measured up to the glasslike state, where in-cage- diffusion and dynamic heterogeneities could be detected. Received: 14 April 1999 Accepted in revised form: 14 June 1999     

Aqueous Solubilities, Infinite Dilution Activity Coefficients and Octanol–Water Partition Coefficients of Tricyclic Analogs of Acyclovir

Solubilities of tricyclic analogs of acyclovir have been determined in water at 25, 35, and 45°C and in octanol, water-saturated octanol, and octanol-saturated water at 25°C. Octanol-water partition coefficients were determined at 25°C. Melting temperatures and molar enthalpies of fusion were measured. Activity coefficients in water, octanol, and in aqueous octanol solutions were determined and are discussed. The effect of hydrophilic and hydrophobic substituents in the tricyclic analogs on their thermodynamic properties are discussed. The standard Gibbs energy of transfer between the saturated phases were found to correlate with known values of the melting point of the solvents and the solubilities of the solute. For a number of the compounds examined, correlations between the minimum inhibitory concentration against the herpes simplex virus type 1 (HSV-1) and type 2 (HSV-2), varicella-zoster virus (VZV), thymidine kinase-deficient (TK^–) strains of VZV and were established. Detailed conclusions have been derived concerning the relationships between the structure and the thermodynamic parameters of the compounds examined.     

Influence of constant magnetic field on electrodeposition of metals,alloys, conductive polymers,and organic reactions

The paper presents and summarizes some research on constant magnetic field effects in chemistry. Metals and alloys electrodeposited under constant magnetic field have greater thickness and smoother surface with finest grains. Metallic materials deposited under the influence of uniform magnetic field may have stronger corrosion resistance, than those obtained without the presence of magnetic field. Constant magnetic field also causes an increase of the electropolymerization rate and yield of some organic reactions. Our research also shows that the presence of constant magnetic field affects the electrodeposition process of alloys and their morphology to a great extent. The effects of magnetic field on metals, alloys, composites, polymers and other materials are due to the Lorentz force and the magnetohydrodynamic effect. It is possible that the further development of magnetoelectrodeposition will allow for using the constant magnetic field to improve the properties of metal coatings, alloys, polymers, and other materials in the industry.     

Examination of Polish Identity Documents by Laser-Induced Breakdown Spectroscopy

Laser-induced breakdown spectroscopy (LIBS) was applied to the preliminary examination of Polish documents – passports and identity cards – for forensic purposes. Several security features of potentially high discrimination capability were selected at both the passports (Alphagram, serial number, the contour map of Europe, and emblem) and identity cards (kinegram, the date of birth, and emblem). Different elemental compositions were identified after comparing the spectra recorded from various measurement locations. It was possible to identify characteristic atomic emission from several elements (such as Ti, Ca, K, Fe, Cr, Mg, Na, La, Cd, Li, V, Al, Mn, Ni, and Cu) based on the type of document, issue date, and evaluated area. In the case of passports, the potentially good discriminators with unique elemental composition were identified, e.g., the serial number and the contour map of Europe printed with the use of intaglio printing technique. Identity cards with the cover of polycarbonate foil constitute a very difficult sample to analyze because of the foil’s influence on the laser ablation phenomenon. This study presents the potential of LIBS as an effective and useful technique to analyze Polish passports for forensic purposes. Its many advantages provide a good alternative to the analytical methods routinely used for the examination of these objects.     

Novel Simultaneous Determination of Calcium and Magnesium Based on Flow Injection Gradient Titration

A novel approach based on flow injection gradient titration is proposed for the simultaneous spectrophotometric determination of Ca and Mg based on parameters of a single signal. Two reagents, calmagite and EDTA, are used to perform the determinations. Calmagite is introduced into a sample to form complexes with the analytes and the solutions are introduced into the holding coil of a sequential injection system in the sequence: carrier, air, sample, EDTA, and sample. In the system, EDTA replaces calmagite to form more stable complexes in turn with Ca and Mg. Next, the flow is reversed and the mixture is directed to the detector where the signal is measured at 680?nm. The signal consists of two parts: a short plateau (the signal for the sum of absorbance of complexes of Ca and Mg with calmagite) and a peak (the signal corresponding to titration of both complexes using EDTA). The absorbance values measured at the plateau and appropriately measured peak width were applied to determine analytes using two-component calibration. The method was verified for the determination of analytes in synthetic samples and in a certified reference material of surface water. Using the developed method, Mg and Ca were determined within the concentration ranges of 0.5–5.0 and 1.0–10.0?mg?L^?1, with precision better than 2.2 and 4.2% (relative standard deviation) and accuracy of 7.0 and 6.8% (relative error). The detection limits were 0.1 and 0.3?mg?L^?1 for Mg and Ca, respectively. The method was applied to analysis of mineral water samples.